explore42's stats
- Review count154
- Helpfulness votes571
- First reviewFebruary 26, 2016
- Last reviewOctober 31, 2024
- Featured reviews0
- Average rating4.3
Reviews comments
- Review comment count0
- Helpfulness votes0
- First review commentNone
- Last review commentNone
- Featured review comments0
Questions
- Question count0
- Helpfulness votes0
- First questionNone
- Last questionNone
- Featured questions0
- Answer count24
- Helpfulness votes239
- First answerFebruary 26, 2016
- Last answerDecember 23, 2021
- Featured answers0
- Best answers8
JVC's True Wireless Earbuds offer a simple and comfortable design. Open type True Wireless design allows users to hear surrounding noise for safety. Easy operation with auto on/off connect. Stable Wireless connection allows users up to 22 hours of use with the built-in battery and charging case. High-quality sound reproduction with neodymium magnet using an 11mm driver. Easy operation touch controls for music and phone calls. Waterproof rated IPX4, resistant to sweat and rain. Single ear use with either left/right, or both. Quick 15 minute charge for 90 minutes of playback. Integrated microphone for teleworking and hands-free calling. Voice assistant compatible.
Posted by: explore42
from Cincinnati, Ohio
These JVC Earbuds are no frill. They don’t have ear wings or foam/rubber ear tips, no sound isolation or active noise cancellation, no mobile app and very limited documentation is supplied with the earbuds. What they do have is a minimalistic design that sits or basically hangs comfortably in my ears. The audio quality is surprisingly nice for earbuds in this price range. The bass isn’t the strongest but the mids and highs sounded bright and clear. You can use these earbuds singularly or as a pair. Although the supplied documentation doesn’t mention it anywhere I was able to use these for answering phone calls and the audio quality and microphone worked reasonably well. Also I found that I could access Siri by tapping and holding the left earbud until I heard beep. In the fine print of the supplied documentation there is a url listing where you can access the on-line user manual which has adequate instructions on phone call control and accessing a virtual assistant. When you remove the earbuds from the case the LED on the earbud flashes rapidly showing that they are in pairing mode. You then pair them using the Bluetooth settings on your mobile device. Once paired the LED flashes at a slower rate showing they are connected. They can only pair with a single device so you need to disconnect from one device before you connect to a new one. There is also voice indicators telling you when the earbuds are turned on/off, when they are ready to pair and when they are connected/disconnected. They have an IPX4 rating so its safe to use them for exercising. The buttons on each earbud are touch sensitive and are easy to engage. Each earbud has an LED to indicate that its charging when in the case. The case has LEDs to indicate the power level and a USB-C cable is included to charge the case. It takes about two hours to fully charge the earbuds and about three hours to charge the case. The earbuds should last about 7.5 hours per charge and the case should provide two additional full charges so you can get about 22 hours of use between having the recharge the case. Overall as inexpensive true wireless earbuds these performed well but the lack of features may limit their value to some users.
I would recommend this to a friend!
Share this review:
+4points
4of 4voted this as helpful.
When it comes to gaming performance, the slightest disadvantage can be the difference between winning and losing a match. With a 165Hz refresh rate, lightning fast 1ms (GTG) response time and full adaptive G-Sync compatability and FreeSync Premium support, you can be sure that the Odyssey G50A won’t let you down on the battlefield.
Posted by: explore42
from Cincinnati, Ohio
Bottom line: I’ve been using this monitor for the past two weeks and once I got everything set up I have come to really like it. The display is super bright with rich color and respectable contrast. I have it connected via a DP cable to a RTX-3060 and all my games look great. I am using G-sync combined with some custom display settings that I saved in the 3 customizable buttons. This makes it very easy to change my display preferences from FPS to RTS to doing work by simply pressing one of the configurable buttons. The lack of USB-C video support and USB-A connectivity is a downside. I wasn’t impressed with the HDR image quality but using the pre-set gaming settings and tweaking the controls I was able to get the image quality I would expect from a really good monitor.
The Samsung Odyssey G5 is an IPS display with QHD 2560x1440 resolution at a 165 hz refresh rate that supports Free Sync and G-Sync with a quick 1ms GtG response time. I found the display to be very bright on the default settings – almost too bright for non-gaming apps. The colors are vivid and bright without being over saturated. I was pleasantly surprised how dark the black areas were and how the display handled bright to dark differentiation. The only negative and it was a small one is that there was a very slight redish/yellowish cast to any white screens such as using Word. I found I could eliminate this by adjusting the color tone. The monitor supports HDR-10 but when you turn on HDR you have two options HDR Standard or HDR Dynamic and you lose the preset picture options for gaming. With HDR off you can choose FPS, RTS, RPG, AOS, sRGB, Cinema and Dynamic Contrast from the preset picture options. Personally I found that I liked the ability to select from presets vs the image quality provided by the HDR setting. There are three buttons that you can customize for Game/Picture settings and this definitely saves time when going between types of games or work apps. I ran the monitor through multiple tests to verify that there weren’t any bad pixels, to check for color and brightness uniformity and verify the 165 hz refresh rate. The monitor performed well and I didn’t have any noticeable backlight bleed or dead pixels. With G-Sync enabled at QHD resolution and 165 hz refresh rate everything looked clear and ran smoothly. I used my RTX-3060 GPU via the display port for the testing. Note that this monitor only supports a refresh rate of 144 hz when using the HDMI port. This monitor does not support USB-C video nor does it have USB-A ports for connecting USB devices.
Setup: Most monitors these days attach to the stands in a toolless method so I was surprised that this one required a Phillips head screw driver. Once attached to the stand you can adjust the monitor for your desired height and angle. The stand legs are somewhat large and the monitor is a bit floppy but once you get it set it holds the position. On the bottom center of the monitor there is a joy stick control that you use to access the input source, the main menu, the power and the eye control. The joy stick control is easy to reach and use even when the monitor is in its lowest position. There are also 3 buttons next to the joy stick for custom game or picture settings. The power, HDMI, DP, USB Service port and headphone jack are on the back facing downward so connecting cables and accessing the ports can be difficult to reach. I updated the monitor’s firmware following the Samsung documentation using a USB drive. I downloaded the firmware onto a USB drive, plugged the drive in the monitor and then selected Update from the menu. The monitor then updated its firmware without issue.
I would recommend this to a friend!
Ease of Use
5
Quality
5
Share this review:
0points
0of 0voted this as helpful.
Introducing the industry's first Quad-band mesh Wi-Fi 6E system. Orbi Quad-band, with dedicated Wi-Fi connections, new Wi-Fi 6E, and a 10 gig wired Internet port, delivers ultra-fast speeds and massive device capacity. With combined Wi-Fi speeds of up to 10.8Gbps across up to 9,000 square feet for up to 200 connected devices, you'll enjoy the amazing Wi-Fi experience.
Customer Rating
3
Things to Consider before Buying
on February 14, 2022
Posted by: explore42
from Cincinnati, Ohio
I like Netgear products, I have relied on a Nighthawk and told all my friends and family to buy one. But I have a very difficult time recommending this Orbi WiFi 6e. The router and two satellites provide an enormous amount of wireless coverage if you don’t mind their large size. For a Satellite that is really far from the router you can run cat 6 cabling between them to create a wired backhaul. Note that only one satellite can be backhauled connected via a cable. The wireless throughput when connected to the router or satellite was on par with other high end tri-band Wi-Fi 6 routers that I have used. Netgear includes some fundamental firewall and router configuration options and network monitoring capabilities via a web browser and a mobile Orbi app. The router does perform auto updates to the firmware which is a requirement these days. But the overall cost for performance and the required subscriptions for Parental Control and Enhanced Security features which other routers provide for free are reasons I would recommend thinking twice before purchasing this solution.
Here are things to consider:
1. The biggest concern with a router is keeping it secure. Netgear still forces you to use “admin” as the only user id for accessing/logging into your router. This is a known security issue. You should be able to create a unique user id to make it more difficult to hack.
2. Wifi 6e provides new wireless bands so that in a congested wireless area you can get a cleaner signal with higher data rates. But you have to be very close and have a clean line-of-sight to the router/satellite for this to work. Wireless coverage past that line-of-site distance drops back to standard wifi 6 so if you have a large house that would mean that most of your wireless coverage would be standard wifi 6. Bottom line is that the vast majority of the wireless coverage will rely on standard wifi 6 speeds so why pay all the extra for the wifi 6e.
3. I first tried to install my units using the Orbi app on my Apple iphone but the install kept failing. So I connected a pc to the router and used the web interface to complete the install. Once the router and satellites were operational the Orbi app started working as expected. Both the web interface and the Orbi app allow you to do the standard administrative functions required for setting up and monitoring your network but they lack the intuitiveness and standard features/options that other router companies offer in their devices. The router only supports QOS WMM which very limited in its capabilities. If you are a gamer and want more control this router is not for you. Parental control is a subscription based service and not included. If you want additional firewall and device security beyond the basics you must purchase the Armor subscription. There are no notifications of new devices being added to the network unless you pay for the Armor subscription. The Armor subscription does include BitDefender that provides antivirus software and checks all devices for vulnerabilities. But if you keep your devices updated and you already have a favorite Security/Antivirus software loaded on your devices this becomes a useless and costly duplication.
4. The router does not have a USB port so you cannot attach a USB drive for file sharing on your network. This was one of the nicer features on the Nighthawk that I used regularly.
5. Netgear placed the wireless SSID and password label on the front of router. If you look at the photos you can see where I tried to remove the label without discoloring the white finish on the router. The same label is on the bottom of the router and satellites so why they ruined the finish by placing it on the front is confusing.
6. There is no way to control or influence what devices attach to which satellite nor is there anyway of making one preferred over the other. When I first powered up the router and satellites most of my devices registered with the main router even though they were closer to a satellite. Over time some of the devices have since moved their registration to a satellite that is physically closer but other devices have not. I would like to have some way to influence what goes where so the overall load is shared. The Orbi app via the network map and drill downs does allow you to see what device is registered to which satellite or router.
1. The biggest concern with a router is keeping it secure. Netgear still forces you to use “admin” as the only user id for accessing/logging into your router. This is a known security issue. You should be able to create a unique user id to make it more difficult to hack.
2. Wifi 6e provides new wireless bands so that in a congested wireless area you can get a cleaner signal with higher data rates. But you have to be very close and have a clean line-of-sight to the router/satellite for this to work. Wireless coverage past that line-of-site distance drops back to standard wifi 6 so if you have a large house that would mean that most of your wireless coverage would be standard wifi 6. Bottom line is that the vast majority of the wireless coverage will rely on standard wifi 6 speeds so why pay all the extra for the wifi 6e.
3. I first tried to install my units using the Orbi app on my Apple iphone but the install kept failing. So I connected a pc to the router and used the web interface to complete the install. Once the router and satellites were operational the Orbi app started working as expected. Both the web interface and the Orbi app allow you to do the standard administrative functions required for setting up and monitoring your network but they lack the intuitiveness and standard features/options that other router companies offer in their devices. The router only supports QOS WMM which very limited in its capabilities. If you are a gamer and want more control this router is not for you. Parental control is a subscription based service and not included. If you want additional firewall and device security beyond the basics you must purchase the Armor subscription. There are no notifications of new devices being added to the network unless you pay for the Armor subscription. The Armor subscription does include BitDefender that provides antivirus software and checks all devices for vulnerabilities. But if you keep your devices updated and you already have a favorite Security/Antivirus software loaded on your devices this becomes a useless and costly duplication.
4. The router does not have a USB port so you cannot attach a USB drive for file sharing on your network. This was one of the nicer features on the Nighthawk that I used regularly.
5. Netgear placed the wireless SSID and password label on the front of router. If you look at the photos you can see where I tried to remove the label without discoloring the white finish on the router. The same label is on the bottom of the router and satellites so why they ruined the finish by placing it on the front is confusing.
6. There is no way to control or influence what devices attach to which satellite nor is there anyway of making one preferred over the other. When I first powered up the router and satellites most of my devices registered with the main router even though they were closer to a satellite. Over time some of the devices have since moved their registration to a satellite that is physically closer but other devices have not. I would like to have some way to influence what goes where so the overall load is shared. The Orbi app via the network map and drill downs does allow you to see what device is registered to which satellite or router.
No, I would not recommend this to a friend.
Share this review:
+8points
8of 8voted this as helpful.
The CORSAIR M65 RGB ULTRA WIRELESS Tunable Gaming Mouse boasts a durable aluminum frame and connects with sub-1ms SLIPSTREAM WIRELESS or low-latency Bluetooth. Experience pinpoint accuracy powered by a 26,000 DPI MARKSMAN optical sensor and optical OMRON switches, while a six-axis gyro enables convenient tilt gestures for in-game actions. 2,000Hz Hyper-polling registers your actions up to 2x faster than other wireless mice. With customizable weight between 110g and 128g and CORSAIR QUICKSTRIKE buttons, all your movements and actions register with the utmost speed. Take control with iCUE software to program the M65 RGB ULTRA’s eight buttons, customize its dynamic RGB backlighting, and save your profiles to onboard storage to take on the go. With up to 120 hours of rechargeable battery life, the M65 RGB ULTRA WIRELESS makes all your clicks count.
Posted by: explore42
from Cincinnati Ohio
As soon as I unboxed and charged up this mouse I went into Corsair’s iCUE software and performed a surface calibration. After that I went into Steam and started benchmarking the mouse using AIM Lab’s game. If you aren’t familiar with AIM labs you might want to try it out because it really does allow you to compare your ability with your mouse in consistent sets. I compared my performance using different weights and DPI settings and based on these I was able to figure out what worked best for me with this mouse. The bottom line is that after customizing the mouse I was about 10% better using this mouse than any other mouse that I have used to play games with. While I am not at the top of any charts I can see actual numbers that justify me saying this mouse has improved my performance.
This mouse looks and feels solid due to its aluminum base. It glides easily and the quick strike buttons engage with a solid click and release which makes these buttons feel super-fast. I found myself using more of a palm grip due to its overall shape. Using it in a claw grip I felt like I lost some of the thumb support and tackiness you get from the sides of the mouse. The Sniper button on the side of the mouse is little farther forward that I would have preferred but with a little time I got used to its position.
Setup and Customizing: This mouse has lots of options to let you customize it to your liking. You can operate the mouse in a wired mode, wireless mode or Bluetooth mode. I tried all three but settled on the wireless mode because it offers a few more options than Bluetooth and doesn’t require a wire. You can adjust the weight by adding or removing three screws with or without the extra donut style weights. This gives you seven different weight settings to try out from 110 to 128 grams. There are eight programmable buttons that you can customize with macros using Corsair’s iCUE software. You can save a customized mouse profile in the mouse with the use of the supplied USB cable. There are five different DPI stages preprogrammed and there is an indicator LED on the top of the mouse to indicate what you have selected. The preprogrammed levels are 400, 800, 1200, 1600 and 3000 but you can change all of these in the iCUE software. You can also do On-the-Fly DPI tuning by increasing or decreasing the value by 50 using short cut keys. If that isn’t granular enough you can use the iCUE software to adjust the DPI by 1 DPI steps. I mostly play in the 400 to 1200 range and found that the preprogrammed DPI up and down buttons with the corresponding color LED made the changes simple and quick. The RGB lighting is controlled by the iCUE software and there are lots of color and lighting pattern options to choose from. The lighting shows up in the Corsair icon on the mouse as well as the lower rear of the mouse. Corsair includes a long USB-C cable for charging the mouse and downloading profiles. The rechargeable battery should last up to 120 hours but that will depend on how the mouse is configured for RGB lighting and sleep time. Corsair’s iCUE software gives you a lot flexibility. Using iCUE you can adjust the dpi settings, configure your button assignments including custom macros and create your RGB lighting effects and colors. Also you can do a surface calibration test. The software does have a tutorial option which does help explain the software options.
I would recommend this to a friend!
Ease of Use
5
Quality
5
Share this review:
0points
0of 0voted this as helpful.
Upgrade to smarter scrolling, better comfort, and more productivity with the Signature M650. The versatile mouse features an adaptive scroll SmartWheel that delivers line-by-line precision, and auto-switches to super-fast free spin mode with the flick of a finger. A choice of sizes for smaller, larger and left hands means there's a perfect fit for anyone. Seamless wireless connectivity, customizable side buttons, and a comfort shape keep you comfortably and productive hour after hour. Logitech’s SilentTouch technology delivers silent clicks to keep you focused – while the up to 24-month battery life and universal operating system compatibility ensure hassle-free performance.
Posted by: explore42
from Cincinnati Ohio
Just when I started to love the silent switches on this mouse I hit the Back button on the slide and heard a loud click. The only reason it sounded loud was because the top switches are silent and you get spoiled with this very quickly. Also the feel and activation of the top switches are nearly perfect where as the side buttons are the typical ones you find on most mice today. Its still a great mouse but I sure wish Logitech would have used the same silent switches on the side buttons. On a positive note, I’ve never had a mouse nearly install itself the way this M650 did. I connected the battery to power up the mouse and I suddenly got a notice on my laptop asking me if I want to install the Logitech M650! Normally I have to go into Bluetooth devices in Windows to add a device so I was shocked how easy it was to pair this mouse. I wish all Bluetooth devices connected this easily. I have used Logitech mice before so I am quite familiar with their fit and feel. This M650 is the medium/small size so its slightly smaller than a typical mouse and its geared for smaller hands but I also think it makes it perfect for laptops and Chromebooks. I like the fact that its small enough to sit on my laptop below the keyboard and not get in the way of my typing. The mouse has a very solid feel and it has some weight which makes moving it accurately an easy task. The sides have ridges built in and are made of a grippier substance so you get a firm grip with your hand resting over the mouse. Overall the ergonomics are perfect for what I like in mouse. The top two switches and the scroll wheel are quiet when clicked which is a definite improvement over other mice I have used however the forward and back switches on the side are as noisy as ever. Not sure why Logitech didn’t make all the switches quiet! The switches that are quiet have a very distinct activation so you don’t miss or need the clicking sound when clicking. The scroll wheel is also quiet and the detents are easy to feel so scrolling with this mouse is top notch. There are the typical five buttons and you can configure them if you don’t like the preprogramed settings by using Logitech’s app. To use the software you have to install the usb receiver which is stored next to the battery inside the mouse. The only issue I have had so far is that the battery cover can be difficult to open due to its small size. Since Logitech claims that you can get nearly two years out of a single battery its not an issue I’ll be fighting very often.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
-1point
0of 1voted this as helpful.
Free your travel with the LG TONE Free FP9. Connect to in-flight entertainment systems even without Bluetooth capabilities. Get peace of mind with a UVnano charging case that kills 99% of bacteria on the speaker mesh¹ and medical grade ear gels.² Plus, get better clarity for calls on the go.
Customer Rating
4
Good Fit and Audio but ANC can be lacking
on January 4, 2022
Posted by: explore42
from Cincinnati Ohio
I’ve been using these headphones when I jog and exercise and the fit and function are great. The audio quality is better than most when paired with the 3D Sound Stage equalizer on the LG Tone app. The ANC with the included ear gels is not so great because they are thin and let in too much outside noise.
Performance: To get the best audio quality out of these headphones I had to turn on the 3D Sound Stage equalizer in the LG Tone App. The app has five preset equalizers and two that you can customize. I played with the customization but 3d Sound Stage also adds some “depth” to the sound quality which is more than you get from just the equalizer. Voice call quality for me was good but some people told me that they had to increase their volume to hear me. The earbuds have Active Noise Cancellation (ANC) and Ambient Sound options. The Ambient Sound setting lets you hear outside sounds so that you can be aware of your surroundings. The ANC was not that great because of the ear gels. The ear gels that come with the headphones are very thin and because of that they do not seal off outside noises very well. I have an air purifier in the room where I work and with it running on medium the ANC would reduce the motor sound by about 30%. I found some improvement by using the included largest ear gels but they were too uncomfortable to wear. When I replaced the stock ear gels with some 3rd party foam ear gels the quality of the ANC was substantial and cut the motor sound by at least 80%. In the end I decided to go back to the original ear gels and when I need high levels of ANC I will swap out the ear gels. In the LG Tone app there is a High and a Low ANC setting but I didn’t notice much difference so I keep mine on High.
Fit and Function: The ear buds are light weight have a low profile so they reside mostly in your ear without looking unsightly. When I jog and work out they don’t move around much and because the ear gels are thin and flexible I didn’t hear any rubbing sound that I have gotten from other headphones. Each earbud has a control switch that is touch sensitive which is really nice because you don’t have to push anything to actuate it. Also the ear bud provides a clicking sound when you activate the switch so you get positive feedback when using them. The only downside is that you have to be aware of the switches when you are putting the earbuds in or when you adjust them because you can easily hit the switch inadvertently. In the LG Tone app you can configure the button functionality for both the right and left earbud for Media and Active Assistant but you cannot change the call control functions nor is there a Mute function for phone calls. The earbuds have auto pause capability when one of the earbuds are removed. They are IPX4 rated so they will handle sweat and moisture. The battery life is up to 10 hours per charge and up to 24 hours when combined with the case. The case is small and very portable. It has a USB-C charging port and there is a colored led on the case to show the battery level. When you open the case there are blue lights that turn on which can be helpful when removing the headphones in the dark. The case has UV lights that clean the ear gels when they are in the charging case. The LG Tone app has lots of features and controls but it can be a little buggy. At first it had trouble finding the earbuds but once it did it starting working problem free.
Wired to Wireless Function: The headphone case can be connected to a non-Bluetooth device using the included USB-C to 3.5mm audio jack as show in the photo. You plug the audio jack into the component and then the USB-C into the case and then the case becomes a Blue Tooth transmitter for the headphones. Since most modern components support Bluetooth this is a limited use feature but it definitely makes these headphones unique.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+1point
2of 3voted this as helpful.
Upgrade from the last generation with the new ROG Strix G10CE, a Windows 11 gaming desktop that delivers exhilarating gaming experiences powered by an 11th Gen Intel® Core™ i7-11700F processor and NVIDIA® GeForce RTX™ 3060 graphics.
Customer Rating
5
Great Components with Limitations
on December 23, 2021
Posted by: explore42
from Cincinnati Ohio
On paper this Asus prebuilt gaming machine has a lot of potential because it has a 512 gb NVMe SSD, NVIDIA RTX 3060 video card, Intel’s i7 11700F CPU, 16 gb of 3200 ddr4 ram, 1 tb 7200 rpm Hard Drive, WiFi 6 and Bluetooth support as well as built in RGB lighting. But once I started digging into to it I realized that its not quite as nice as I had hoped. Don’t get me wrong I still think it’s a five star deal because of the components and their performance for the dollar but some of the build makes me wonder what Asus had in mind. None of the items below are show stoppers and the system performs quite well considering the build. Overall I think the system even with its quarks is great deal. When you are looking in this price range for a good gaming desktop its hard to find anything better.
Here are the things that caught me by surprise.
- The ddr4 ram is 3200 mhz but it’s a single module so it doesn’t use dual channel memory. The existing module works fine but having two modules using dual channels is better for gaming.
- The included hard drive is a Toshiba 1 tb drive which isn’t enough space for my games and videos. Sadly, there is not a second drive bay even though there are plenty of Sata connectors on the motherboard. The only option is to swap out the existing drive for a larger one.
- There are two M2 NVMe PCIe slots, the first M2 slot holds the WD 512 gb SSD but the second slot is missing the standoff and screw so to add another SSD you have to purchase the mounting hardware.
- The chassis has no front or top ventilation and if you install the clear side panel it only leaves a small gap for air to enter via the side. Overall this chassis lacks good ventilation.
- The chassis fan and the cpu fan meet the requirements but are small thus when running full speed which happens often due to the temperatures they can be rather noisy.
- There are no USB-C or Thunderbolt ports however there are PS-2 connectors! I have no idea why anyone would include PS-2 connectors. I also am shocked they didn’t include at least one USB-C for high speed transfers. On the plus side there are lots of USB-A ports.
- The enclosed mouse and keyboard are bare minimum so expect to replace them.
- The ddr4 ram is 3200 mhz but it’s a single module so it doesn’t use dual channel memory. The existing module works fine but having two modules using dual channels is better for gaming.
- The included hard drive is a Toshiba 1 tb drive which isn’t enough space for my games and videos. Sadly, there is not a second drive bay even though there are plenty of Sata connectors on the motherboard. The only option is to swap out the existing drive for a larger one.
- There are two M2 NVMe PCIe slots, the first M2 slot holds the WD 512 gb SSD but the second slot is missing the standoff and screw so to add another SSD you have to purchase the mounting hardware.
- The chassis has no front or top ventilation and if you install the clear side panel it only leaves a small gap for air to enter via the side. Overall this chassis lacks good ventilation.
- The chassis fan and the cpu fan meet the requirements but are small thus when running full speed which happens often due to the temperatures they can be rather noisy.
- There are no USB-C or Thunderbolt ports however there are PS-2 connectors! I have no idea why anyone would include PS-2 connectors. I also am shocked they didn’t include at least one USB-C for high speed transfers. On the plus side there are lots of USB-A ports.
- The enclosed mouse and keyboard are bare minimum so expect to replace them.
Performance: I spent the better part of a day running this desktop through benchmark testing to see how well it would perform and how well the temperature of the motherboard, GPU and CPU would be maintained with the limited amount of air flow in the chassis. While performing all these test I used Armoury Crate to set the system to the TURBO setting – this is the ASUS recommended setting for gaming. Using the 3DMARK stress test the GPU ran at 100% utilization and the temps of the GPU and CPU averaged around 75 degrees Celsius. Throughout all the other test as well as when playing games I would check the CPU temp and it again stayed in the mid 70s. Per the 3DMARK testing this build is slightly below average for its component level which I suspect is due to the single ram module. The Graphics score was 8608 and the CPU score was 7437. Here are some of the estimated game performance scores I got while testing with 3DMARK as well as some Geekbench5 scores.
3DMARK
Graphics Score = 8608
CPU Score = 7437
Battlefield V @1080p Ultra = 105+ FPS
Battlefield V @ 1440p Ultra = 85+ FPS
Apex Legends@1080p Ultra = 140+ FPS
Apex Legends@ 1440p Ultra = 95+ FPS
GTA V @1080p Ultra = 80+ FPS
GTA V @ 1440p Ultra = 50+ FPS
Fortnite @1080p Ultra = 125+ FPS
Fortnite @ 1440p Ultra = 90+ FPS
Red Dead Redemption 2 @1080p Ultra = 40+ FPS
Red Dead Redemption 2@ 1440p Ultra = 30+ FPS
3DMARK
Graphics Score = 8608
CPU Score = 7437
Battlefield V @1080p Ultra = 105+ FPS
Battlefield V @ 1440p Ultra = 85+ FPS
Apex Legends@1080p Ultra = 140+ FPS
Apex Legends@ 1440p Ultra = 95+ FPS
GTA V @1080p Ultra = 80+ FPS
GTA V @ 1440p Ultra = 50+ FPS
Fortnite @1080p Ultra = 125+ FPS
Fortnite @ 1440p Ultra = 90+ FPS
Red Dead Redemption 2 @1080p Ultra = 40+ FPS
Red Dead Redemption 2@ 1440p Ultra = 30+ FPS
Geekbench5
Single Core Score = 1545
Multi Core Score = 6831
Open CL Score = 99577
Cuda Score = 100343
Vulkan Score = 70989
Single Core Score = 1545
Multi Core Score = 6831
Open CL Score = 99577
Cuda Score = 100343
Vulkan Score = 70989
Setup: The setup was straight forward with no issues. I connected the monitor to the HDMI port and the mouse and keyboard to the rear USB ports. There are also 3 Display port connectors available if you want to connect multiple monitors. The system comes with a medal side panel that can be replaced with the enclosed clear plastic panel. You just remove the medal side panel, screw in four standoffs and then attach the clear panel with four large screws. The unit powered on and it went through several updates both Windows 11 and ASUS generated. The system comes with MyASUS and Armoury Crate apps already installed but both needed multiple updates. Using Armoury Crate you can manage the components as well as set the RGB lighting throughout the chassis. Setting the color schemes was simple and overall looked good with the plastic side panel installed.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+6points
14of 22voted this as helpful.
![Webroot - Security for Chromebook Antivirus (1 Device) (1-Year Subscription) - Windows [Digital]](https://pisces.bbystatic.com/prescaled/500/500/image2/BestBuy_US/images/products/6476/6476247_sd.jpg)
Webroot® Security for Chromebook™ is enhanced antivirus protection that is always-on, running seamlessly in the background and proactively alerting you about malicious activity, websites, apps and extensions. Included, Webroot Web Threat lets you browse safely and be alerted of dangerous sites in Google Chrome™.
Customer Rating
4
Securing the Chromebook
on November 30, 2021
Posted by: explore42
from Cincinnati Ohio
I’m glad that Webroot has come out with a security program aimed at protecting Chromebooks. We have two Chromebooks that are used by the family for general web surfing, learning apps and video watching. Now with the Webroot Security installed I feel a little less worried about using the Chromebooks. This software is supposed to provide Antivirus protection against malware and spyware as well as preventing access to unsafe web sites. It provides live scanning as well as virus scans on demand. The main software installation was simple and quick. I downloaded the app from the Google store and entered in my software key. Once it is installed it will scan your Chromebook and from that point on it does live scans on its own. To get the Secure Web Browsing you have to use the Webroot browser which is included in the software or add the Threat Shield extension to your existing Chrome browser which takes some additional downloading and software registration. This makes the installation process a little more tedious if you want the full protection. I couldn’t see any performance hits on my Chromebook or browser so I think its light on the resource demands. So far we haven’t seen any security warnings but I am glad that the Webroot software is there protecting us.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+1point
1of 1voted this as helpful.
PowerCore III 10K is a slim and powerful portable 10000mAh battery. With two USB-A port PowerIQ outputs for high-speed dual device charging and one USB-C PD input for incredibly fast recharging. This is all you need as your charging companion.
Customer Rating
5
Slim, Light and a Perfect gift
on November 24, 2021
Posted by: explore42
from Cincinnati Ohio
I have several of the larger Anker PowerCore chargers but I wanted a slimmer lighter one for carrying around for day-to-day use. The bigger versions are great for overnight travel, backpacking and general back up for electrical outages but they are tad heavy to carry around in a pocket or a purse. This 10,000 mah model is definitely lighter and thinner. For perspective it is about the size and depth of my iphone . It has two USB-A ports to charge devices and a single USB-C port used to charge the PowerCore. The two USB-A ports supply an output of 5v at up to 2.4 amps. The two ports allow me to charge my phone and earbuds at the same time. There is a switch on the top that allows you to turn on trickle charging for your smaller items like earbuds. Around the switch there are four LEDs which indicate the battery level when its charging as well as lighting up to indicate when its charging a device. Anker includes a nice carry bag for storing the charger and the included USB-A to USB-C cable. I’ve now used this to charge my Iphone, Ipad Pro and several brand earbuds without any issue. I think it’s a great gift for anyone because who doesn’t need a good back up power supply for their phone and tablet.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
-3points
0of 3voted this as helpful.
![Adobe - Photoshop Elements 2022 & Premiere Elements 2022 - Windows [Digital]](https://pisces.bbystatic.com/prescaled/500/500/image2/BestBuy_US/images/products/6475/6475053_sd.jpg)
Discover the fun of creative editing and storytelling. Adobe Sensei AI technology* and automated options do the heavy lifting so you can instantly turn photos into art, warp photos to fit any shape, reframe your video subjects, and more. Add moving overlays or 3D camera motion to take your photos to a whole new level, and save them as MP4s for easy sharing on social. Grow your skills with 87 Guided Edits that step you through how to create perfect pet pics; extend, remove, or replace photo backgrounds; add fun animated overlays to your videos; bring out details in video shadows and highlights; and more. Edit and export videos in social-friendly vertical and square aspect ratios, and compress videos for easy sharing. Effortlessly organize your photos and videos, and craft personalized creations like dynamic photoand video slideshows with all-new styles, inspirational quote graphics, and animated social posts. Transform your favorite photos into gallery-quality wall art, beautiful prints, and unique keepsakes with the built-in prints and gifts service .†And enjoy an updated look that makes the software even easier to use and navigate. *Adobe Sensei is the technology that powers intelligent features across all Adobe products to dramatically improve the design and delivery of digital experiences, using artificial intelligence and machine learning in a common framework. †FUJIFILM Prints & Gifts service is available in the U.S. only.
Customer Rating
5
Easy way to Improve your videos & photos
on November 7, 2021
Posted by: explore42
from Cincinnati Ohio
I am not a professional blogger or photographer but I do take a lot of videos and photographs while capturing images of my friends and family. I capture life’s moments using everything from 4k video cams to my iphone. A lot of times those shots/videos are taken in the spur of the moment so they may not be framed correctly or at the right exposure or even include things I wish were not in the photo. Because of this I started buying Adobe’s Photoshop Elements and Premier Elements long ago. I’ve always felt that this software matches my expertise level, it guides me through things that I don’t use often enough to be proficient at but also gives me total control in the expert mode for when I really want to edit my photos or videos. If you have used either Photoshop Elements or Elements Premier in the past you will feel right at home with this new version. The other plus of this software is the enormous number of tutorials, videos and documents on the web by Adobe and 3rd parties to help teach you how to get the most out of it.
The home page allows you to select Photoshop Elements, the Organizer or Premier Elements. The Organizer does what it says by helping you organize all your photos and videos using several tools built into the software. If you select Photoshop Elements or Premier Elements you will open to the project page where you can select Quick, Guided and Expert mode. This 2022 version includes 87 new Guided options which includes some new features over the standard guides of past versions. Some of the newer features like adding moving overlays to photos or movies were pretty straight forward but I found the Auto Reframe that allows you to resize your video a tad confusing. I am sure within the next 30 days someone will be posting videos on using the Auto Reframe feature that will show me what I need to do better. Doing all the typical editing or adding special effects is pretty straight forward and I think this is where the Guided options really pay off. The Guide takes the numerous options included in the software and helps you chose the right ones. The only downside I have found with using the Expert mode is that there are so many help guides on the web that you have to make sure you find one that is specific to the 2022 version. Adobe keeps automating and improving the software so I think it was worth upgrading so I could use the latest features like adding the cool overlays and extending the backgrounds and creating perfect pet photos.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+1point
1of 1voted this as helpful.
explore42's Review Comments
explore42 has not submitted comments on any reviews.
explore42's Questions
explore42 has not submitted any questions.
Designed to make printing easier for the whole family, the HP ENVY 6055 all-in-one printer lets everyone print, scan, and copy everyday documents, schoolwork, borderless photos and more. This wireless picture printer can order ink for you and deliver it to your door with up to 50% savings on ink using the HP Instant Ink delivery service, so you can print high-quality documents and photos when you need them (subscription required). Set up, and connect the all-in-one printer to your family's mobile devices in a few easy steps for remote scanning and sharing using the HP Smart app. And keep connected, and reduce interruptions with self-healing Wi-Fi and Bluetooth 5.0 technology. Prints up to 10 ISO ppm* in black and up to 7 ppm* in color.
is this self healing?
I assume you are asking about wireless self healing. According to the specs it is self healing. I have this on my 2.4 wireless network and so far its been rock solid.
4 years, 4 months ago
by
explore42
Designed to make printing easier for the whole family, the HP ENVY 6055 all-in-one printer lets everyone print, scan, and copy everyday documents, schoolwork, borderless photos and more. This wireless picture printer can order ink for you and deliver it to your door with up to 50% savings on ink using the HP Instant Ink delivery service, so you can print high-quality documents and photos when you need them (subscription required). Set up, and connect the all-in-one printer to your family's mobile devices in a few easy steps for remote scanning and sharing using the HP Smart app. And keep connected, and reduce interruptions with self-healing Wi-Fi and Bluetooth 5.0 technology. Prints up to 10 ISO ppm* in black and up to 7 ppm* in color.
Is this printer good for home use from a computer and my iPhone?
As long as you are printing about 100 to 200 pages per month this printer should work for you. The HP Smart software works on my Ipad so it should work on your iphone. Download the app from the Apple store and check it out. I have the software on my ipad and my windows laptop and can print without any issues. There are also buttons on the printer if you would prefer to use them vs the software app. This printer can scan, print and copy but it cannot receive faxes. You can send a fax using HP's cloud services but it cannot receive a fax. Also if you do a lot of color printing realize that the colors are in a single cartridge with this printer so if one color is used up you have to replace the entire color cartridge.
4 years, 4 months ago
by
explore42
Enhance your mobile play experience with these Emerge gaming triggers. They can be added to smartphones to provide more satisfying left and right buttons, and the tactile switches are great for use with first-person shooters. These Emerge gaming triggers have suction cups to hold them securely in place during use.
Will they work on an iPad mini???
As long as you can download the HP Sprocket software from the Apple store and you can turn on the Bluetooth connectivity on your IPAD the printer should work fine.
4 years, 9 months ago
by
explore42
Turn moments from your phone into effortless photo creations. Designed to use with Bluetooth and the HP Sprocket app, plus the included power bank, you can easily transform photos from your camera roll or social media into sharable memories.Creates a 4" x 6" photo-quality print in as little as 61 seconds*
Does this version print 2x3 sticky back photos too, or just the 4x6 size?
Experience hands-free phone usage with this LG TONE Flex wireless stereo headset. The integrated Meridian Technology, 32-bit Hi-Fi DAC and multilayer metal construction deliver fine-detailed audio with high resolution, while retractable earbuds and a flexible neckband offer comfort. This LG TONE Flex wireless stereo headset is Bluetooth enabled for effortless syncing with your smartphone.
Are these sweat resistant?
They are not water or sweat proof. I would not recommend using them in any type of workout activity.
4 years, 9 months ago
by
explore42
Game on the go with this Dell Inspiron laptop. An NVIDIA GeForce GTX 1660 Ti runs most titles, while the two tuned speakers and 15.6-inch Full HD anti-glare narrow-border display deliver an immersive experience. This Bluetooth-compatible Dell Inspiron laptop has a 9th-gen Intel Core i5 processor and 8GB of RAM, handling multitasking without issue, and the 512GB NVMe SSD offers exceptional data access speeds.
Can I add Ram to it?
It comes with 8gb in two slots. According to Dell's specs you can upgrade to 32gb.
4 years, 10 months ago
by
explore42
Game on the go with this Dell Inspiron laptop. An NVIDIA GeForce GTX 1660 Ti runs most titles, while the two tuned speakers and 15.6-inch Full HD anti-glare narrow-border display deliver an immersive experience. This Bluetooth-compatible Dell Inspiron laptop has a 9th-gen Intel Core i5 processor and 8GB of RAM, handling multitasking without issue, and the 512GB NVMe SSD offers exceptional data access speeds.
How much ram is there?
It comes with 8gb in two slots. These can be upgraded up to 32gb per Dell's specs.
4 years, 10 months ago
by
explore42
Game on the go with this Dell Inspiron laptop. An NVIDIA GeForce GTX 1660 Ti runs most titles, while the two tuned speakers and 15.6-inch Full HD anti-glare narrow-border display deliver an immersive experience. This Bluetooth-compatible Dell Inspiron laptop has a 9th-gen Intel Core i5 processor and 8GB of RAM, handling multitasking without issue, and the 512GB NVMe SSD offers exceptional data access speeds.
Is this a 144hz screen?
Game on the go with this Dell Inspiron laptop. An NVIDIA GeForce GTX 1660 Ti runs most titles, while the two tuned speakers and 15.6-inch Full HD anti-glare narrow-border display deliver an immersive experience. This Bluetooth-compatible Dell Inspiron laptop has a 9th-gen Intel Core i5 processor and 8GB of RAM, handling multitasking without issue, and the 512GB NVMe SSD offers exceptional data access speeds.
There is another slot for solid or hard drive?
Say goodbye to cords and cables with these Skullcandy Sesh true wireless headphones. Bluetooth technology seamlessly connects to your smartphone, tablet or PC, letting you stream music or take phone calls with the built-in microphone. These water-resistant Skullcandy Sesh true wireless headphones come with a charging case, providing up to an extra 7 hours of listening time.
What is the maximum distance that the blue tooth works before it disconnects from your phone??
The documentation for the Skullcandy Sesh says 30 feet but that varies with the device you are connected to and the environment you are in. I found that I could easily go to over 30 ft when connected to my IPAD but my at that same distance I would get drop outs when connected to my Samsung phone. The things to consider are the environment - thickness of walls and floors as well as other electronics that may be supplying interference.
4 years, 11 months ago
by
explore42