SonyCameraGuy's stats
- Review count83
- Helpfulness votes333
- First reviewNovember 2, 2012
- Last reviewOctober 25, 2024
- Featured reviews0
- Average rating3.9
- Review comment count2
- Helpfulness votes0
- First review commentJuly 1, 2017
- Last review commentJuly 2, 2017
- Featured review comments0
Questions
- Question count0
- Helpfulness votes0
- First questionNone
- Last questionNone
- Featured questions0
- Answer count20
- Helpfulness votes45
- First answerOctober 10, 2014
- Last answerOctober 12, 2020
- Featured answers0
- Best answers3
Enjoy big-screen entertainment with this Epson 3LCD portable projector. All-digital HDMI connectivity lets you stream from a variety of devices, and 3,300 lumens of equal color and white brightness let you use it in almost any lighting condition. This Epson 3LCD projector lets you view images up to 25 times larger than those on a 60-inch TV.
Customer Rating
3
OK for small home projector
on March 13, 2018
Posted by: SonyCameraGuy
from Cary, NC
Setup:
This projector is a very simple plug-and-play. There are no drivers to install if you are using HDMI or VGA input. USB video display software must be installed to use the USB-B input. The Home Cinema 660 (HC660) can be used on a table or mounted to the ceiling. Ceiling mounting hardware is sold separately.
Input:
HDMI is by far the most convenient and universally compatible with modern computers and other audio/video (A/V) sources. No HDMI cable is provided with the HC660.
VGA offers video only, but is backwardly compatible with older computers (and other video sources) with VGA output ports. The HC660 does not comes with a VGA cable.
RCA jacks (female) are available for audio (right and left) and video. A cable for RCA input is not provided with the HC660. Note that the video signal uses only one jack and will not work for composite video devices with separate jacks for red, green, and blue signals. While I have not done so myself, it should be possible to use the VGA input for video and the RCA input for audio (only).
USB-B input is available on the HC660, but you will need a USB cable and installation of the Epson’s USB Display driver software.
USB-A input is a nice idea, but there are inconvenient restrictions to its use. Devices must be USB Mass Storage Class-compliant, formatted in FAT or FAT32, self-powered (i.e. require no bus power), and can have only one partition. Only a limited number of file formats are supported (.jpg, .bmp, .gif, .png, and .avi) and there are notable limitations on the file size, resolution, and format for each file type. You can check out page 99 of the User’s Guide (https://files.support.epson.com/docid/cpd5/cpd53633.pdf) for details.
This projector is a very simple plug-and-play. There are no drivers to install if you are using HDMI or VGA input. USB video display software must be installed to use the USB-B input. The Home Cinema 660 (HC660) can be used on a table or mounted to the ceiling. Ceiling mounting hardware is sold separately.
Input:
HDMI is by far the most convenient and universally compatible with modern computers and other audio/video (A/V) sources. No HDMI cable is provided with the HC660.
VGA offers video only, but is backwardly compatible with older computers (and other video sources) with VGA output ports. The HC660 does not comes with a VGA cable.
RCA jacks (female) are available for audio (right and left) and video. A cable for RCA input is not provided with the HC660. Note that the video signal uses only one jack and will not work for composite video devices with separate jacks for red, green, and blue signals. While I have not done so myself, it should be possible to use the VGA input for video and the RCA input for audio (only).
USB-B input is available on the HC660, but you will need a USB cable and installation of the Epson’s USB Display driver software.
USB-A input is a nice idea, but there are inconvenient restrictions to its use. Devices must be USB Mass Storage Class-compliant, formatted in FAT or FAT32, self-powered (i.e. require no bus power), and can have only one partition. Only a limited number of file formats are supported (.jpg, .bmp, .gif, .png, and .avi) and there are notable limitations on the file size, resolution, and format for each file type. You can check out page 99 of the User’s Guide (https://files.support.epson.com/docid/cpd5/cpd53633.pdf) for details.
Remote:
All of the projector’s features and menu system can be accessed through the remote control. This is a great convenience if you have your HC660 mounted on the ceiling. The remote does not have an integrated laser pointer, but there is an on-screen digital pointer that can be operated with arrow keys on the remote. This feature is only enabled when using HDMI and USB-B input.
The split key on the remote allows side-by-side images from two video input sources. The remote also has a digital zoom and the arrow keys let you pan in four directions.
There are two IR receiver, on the front and one in the back, to allow the remote to function from almost any angle.
All of the projector’s features and menu system can be accessed through the remote control. This is a great convenience if you have your HC660 mounted on the ceiling. The remote does not have an integrated laser pointer, but there is an on-screen digital pointer that can be operated with arrow keys on the remote. This feature is only enabled when using HDMI and USB-B input.
The split key on the remote allows side-by-side images from two video input sources. The remote also has a digital zoom and the arrow keys let you pan in four directions.
There are two IR receiver, on the front and one in the back, to allow the remote to function from almost any angle.
Output:
Video output on the HC660 has a native resolution of 800 x 600 pixels (SVGA) and can be configured with a 16:9 or 16:10 aspect ratio. The maximum recommended projection distance is about 16 feet. The bulb takes about 30sec to come to full brightness. While the 800 x 600 resolution will be a substantial step back for most users accustomed to “monitor-quality” viewing experience, it is sufficient for a small home cinema projection setup.
Horizontal and vertical keystone adjustments are easy and intuitive. There are 5 preset color profiles, but brightness, contrast, saturation, tint, sharpness, and color temperature are each individually customizable. There is even a noise reduction option for smoothing out the “grain” in images.
Audio output is the weakest part of the HC660 and limited to a single 2-inch speaker in the rear of the projector. It will provide reasonable volume for a small conference room, but not much more. If you need high-quality audio output, I would highly recommend getting a separate dedicated system for this purpose.
Design:
The HC660 is light, compact, and well designed for a simple home cinema projection system. The fan is a relatively quite. The cooling air inlet has a removable filter to keep dust out of the lamp housing. Epson recommends cleaning the filter with a light (i.e. computer) vacuum or small brush. Replacement filters are available for purchase. The lamp is behind the small speaker and seems relatively easy to replace. The HC660 will alert you (presumably on screen) when the filter or lamp need attention.
Video output on the HC660 has a native resolution of 800 x 600 pixels (SVGA) and can be configured with a 16:9 or 16:10 aspect ratio. The maximum recommended projection distance is about 16 feet. The bulb takes about 30sec to come to full brightness. While the 800 x 600 resolution will be a substantial step back for most users accustomed to “monitor-quality” viewing experience, it is sufficient for a small home cinema projection setup.
Horizontal and vertical keystone adjustments are easy and intuitive. There are 5 preset color profiles, but brightness, contrast, saturation, tint, sharpness, and color temperature are each individually customizable. There is even a noise reduction option for smoothing out the “grain” in images.
Audio output is the weakest part of the HC660 and limited to a single 2-inch speaker in the rear of the projector. It will provide reasonable volume for a small conference room, but not much more. If you need high-quality audio output, I would highly recommend getting a separate dedicated system for this purpose.
Design:
The HC660 is light, compact, and well designed for a simple home cinema projection system. The fan is a relatively quite. The cooling air inlet has a removable filter to keep dust out of the lamp housing. Epson recommends cleaning the filter with a light (i.e. computer) vacuum or small brush. Replacement filters are available for purchase. The lamp is behind the small speaker and seems relatively easy to replace. The HC660 will alert you (presumably on screen) when the filter or lamp need attention.
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+9points
9of 9voted this as helpful.
Listen to music while traveling with these Bluetooth-enabled JLab earbuds. Noise-cancelling technology eliminates up to 90 percent of background noise, so you can focus on the songs, and they work for up to 11 hours on a single charge to keep you entertained. These JLab earbuds have intuitive controls for changing tracks, pausing or adjusting the volume.
Customer Rating
4
OK earbuds for wireless
on March 9, 2018
Posted by: SonyCameraGuy
from Cary, NC
Setup:
Bluetooth setup with Android phone was easy. There was no app to install. The unit came mostly charged (instant gratification for those who need it).
Bluetooth setup with Android phone was easy. There was no app to install. The unit came mostly charged (instant gratification for those who need it).
Accessories:
The earbuds came with a short USB charging cable, a single-ended 3.5mm stereo to USB adapter, a nice zippered case, a rubber sleeve for flat cable connecting ear pieces, and variety of tips and ear paddles.
The earbuds came with a short USB charging cable, a single-ended 3.5mm stereo to USB adapter, a nice zippered case, a rubber sleeve for flat cable connecting ear pieces, and variety of tips and ear paddles.
Noise cancelling:
I could not tell if true active noise cancelling was implemented (i.e. inverse wave form generated to cancel out ambient sound). There was audible white noise when noise cancelling was enabled. This is more noise masking than noise cancelling. There is a fair amount of noise attenuation when the earbuds are fit snuggly in the ears.
Design:
The earbuds are comfortable and stay in place for me. The “paddles” can be cumbersome to install, but can help keep the phones in, especially while exercising. Wearing the strap behind the neck is more comfortable than hanging in front. However, you will need a mirror to see the lights on the right control module when worn around the back of the neck.
A good seal is essential to getting the best possible sound quality. Be sure to find a tip that works for you. There are two rings on the barrel of each earpiece that allow the tips to be positioned at the barrel end or near the body of the earpiece. You may want to try both positions to get the most comfortable and effective seal.
While it might be OK for use with a phone, the USB cable with 3.5mm stereo adapter is too short to use with my laptop computers.
I could not tell if true active noise cancelling was implemented (i.e. inverse wave form generated to cancel out ambient sound). There was audible white noise when noise cancelling was enabled. This is more noise masking than noise cancelling. There is a fair amount of noise attenuation when the earbuds are fit snuggly in the ears.
Design:
The earbuds are comfortable and stay in place for me. The “paddles” can be cumbersome to install, but can help keep the phones in, especially while exercising. Wearing the strap behind the neck is more comfortable than hanging in front. However, you will need a mirror to see the lights on the right control module when worn around the back of the neck.
A good seal is essential to getting the best possible sound quality. Be sure to find a tip that works for you. There are two rings on the barrel of each earpiece that allow the tips to be positioned at the barrel end or near the body of the earpiece. You may want to try both positions to get the most comfortable and effective seal.
While it might be OK for use with a phone, the USB cable with 3.5mm stereo adapter is too short to use with my laptop computers.
In-line microphone & remote control:
From what friends and colleagues tell me, the microphone works well. I had to turn the gain all the way up when using them on a teleconference. Not being tethered to a phone or computer is nice.
The in-line remote control works with Android music apps (e.g. Neutron). The center button is play/pause (short press). The up/down buttons work for volume (short press) and forward/back track selection (long press). The remote did not work well for me on phone calls. A short press on the center button is supposed to answer an incoming call. It disconnected the Bluetooth when I tried it.
From what friends and colleagues tell me, the microphone works well. I had to turn the gain all the way up when using them on a teleconference. Not being tethered to a phone or computer is nice.
The in-line remote control works with Android music apps (e.g. Neutron). The center button is play/pause (short press). The up/down buttons work for volume (short press) and forward/back track selection (long press). The remote did not work well for me on phone calls. A short press on the center button is supposed to answer an incoming call. It disconnected the Bluetooth when I tried it.
Sound Quality:
These are not audiophile quality in-ear-monitors (IEMs). The bass and mids are forward and treble is recessed. Equalization helps considerably. Microphonics are minimized by the soft cable. These will not replace my $400 IEMs, but for the price they are a solid on-the-go, Bluetooth performer with all genres tested (rock, jazz, classical, & pop).
These are not audiophile quality in-ear-monitors (IEMs). The bass and mids are forward and treble is recessed. Equalization helps considerably. Microphonics are minimized by the soft cable. These will not replace my $400 IEMs, but for the price they are a solid on-the-go, Bluetooth performer with all genres tested (rock, jazz, classical, & pop).
Battery:
The downfall of any small Bluetooth device, battery life. The battery came almost completely charged. Voice messages at startup let you know the battery status, “Fully Charged”, “Medium”, and “Low”. Charging from fully drained (using USB3 port on my computer) took 1.5 hours. I lost a full charge overnight when accidentally leaving them on with noise cancelling. If you remember to turn it off when not in use, you can get the advertised 7 hours of Bluetooth audio with noise cancelling.
The downfall of any small Bluetooth device, battery life. The battery came almost completely charged. Voice messages at startup let you know the battery status, “Fully Charged”, “Medium”, and “Low”. Charging from fully drained (using USB3 port on my computer) took 1.5 hours. I lost a full charge overnight when accidentally leaving them on with noise cancelling. If you remember to turn it off when not in use, you can get the advertised 7 hours of Bluetooth audio with noise cancelling.
The following albums were sampled during my review:
Adam Harasiewicz: Chopin Nocturnes & Preludes
Adrian Legg: Waiting for a Dancer
Antonio Pleeth: Geminiani 6 cello sonatas
Beatles: 1
Billy Mclaughlin: Fingerdance
Bonnie Raitt: Road Tested
Calum Graham: Phoenix Rising
Creed: My Own Prison
Dirks und Wirtz: Kinski Spencer Gismonti
Don Ross: PS15
Earl Klugh & Bob James: One on One
Francois Sciortino: French Guitar
Giovanni Palombo: La melodia segreta, A Secret Melody
Goran Sollscher: Eleven-String Baroque
Hoff Ensemble: Quiet Winter Night
Jian Wang: The Baroque Album
Joe Satriani, Surfing with the Alien, Crystal Planet, Flying in a Blue Dream, Unstoppable Momentum
John Doan: A Celtic Pilgrimage
John Williams: The Guitarist
Julian Webber: Elgar Cello Concerto - Saint-Saens Cello Concerto No.1
Krzysztof Meisinger: Villa-Lobos Melodia Sentimental
Laurence Juber: Guitar Noir
Lawson Rollins: Elevation
Los Angeles Guitar Quartet: Spin
Luca Stricagnoli: Luca Stricagnoli
Markus Segschneider: Snapshots
Michel Haumont: Michel Haumont & Co
Mike Dawes: What Just Happened
Mstislav Rostropovich: Beethoven The Cello Sonatas- Vol1&2, Chopin Cello Sotatas, Schubert Schuman Debusy Cello Sonatas, The Brahms Sonatas, Vivaldi - Tartini - Boccherini Cello Concertos
Nora Jones: Come Away with Me
Oslo String Quartet: The Shubert Connection
Peppino D'Agostino: Acoustic Guitar
Ryan LeBlanc: Speechless
Sarah Mclachlan: Fumbling Towards Ecstasy, Surfacing
Sergio & Odair Assad: Sérgio & Odair Assad Play Piazzolla
Steve Vai: The Ultra Zone, Fire Garden
Tomasz Gaworek: Born To Be Together
Tori Amos: Little Earthquakes
TRONDHEIMSOLISTENE: In Folk Style, Souvenir I & II,
Vladimir Horowitz: Rachmaninov Piano Concerto #3
Yo-Yo Ma: Bach Cello Suites Nos. 1, 5 & 6, Rachmaninov Prokofiev Cello Sonatas, Mendelssohn Piano Trios, Op. 49 & Op. 6
Adam Harasiewicz: Chopin Nocturnes & Preludes
Adrian Legg: Waiting for a Dancer
Antonio Pleeth: Geminiani 6 cello sonatas
Beatles: 1
Billy Mclaughlin: Fingerdance
Bonnie Raitt: Road Tested
Calum Graham: Phoenix Rising
Creed: My Own Prison
Dirks und Wirtz: Kinski Spencer Gismonti
Don Ross: PS15
Earl Klugh & Bob James: One on One
Francois Sciortino: French Guitar
Giovanni Palombo: La melodia segreta, A Secret Melody
Goran Sollscher: Eleven-String Baroque
Hoff Ensemble: Quiet Winter Night
Jian Wang: The Baroque Album
Joe Satriani, Surfing with the Alien, Crystal Planet, Flying in a Blue Dream, Unstoppable Momentum
John Doan: A Celtic Pilgrimage
John Williams: The Guitarist
Julian Webber: Elgar Cello Concerto - Saint-Saens Cello Concerto No.1
Krzysztof Meisinger: Villa-Lobos Melodia Sentimental
Laurence Juber: Guitar Noir
Lawson Rollins: Elevation
Los Angeles Guitar Quartet: Spin
Luca Stricagnoli: Luca Stricagnoli
Markus Segschneider: Snapshots
Michel Haumont: Michel Haumont & Co
Mike Dawes: What Just Happened
Mstislav Rostropovich: Beethoven The Cello Sonatas- Vol1&2, Chopin Cello Sotatas, Schubert Schuman Debusy Cello Sonatas, The Brahms Sonatas, Vivaldi - Tartini - Boccherini Cello Concertos
Nora Jones: Come Away with Me
Oslo String Quartet: The Shubert Connection
Peppino D'Agostino: Acoustic Guitar
Ryan LeBlanc: Speechless
Sarah Mclachlan: Fumbling Towards Ecstasy, Surfacing
Sergio & Odair Assad: Sérgio & Odair Assad Play Piazzolla
Steve Vai: The Ultra Zone, Fire Garden
Tomasz Gaworek: Born To Be Together
Tori Amos: Little Earthquakes
TRONDHEIMSOLISTENE: In Folk Style, Souvenir I & II,
Vladimir Horowitz: Rachmaninov Piano Concerto #3
Yo-Yo Ma: Bach Cello Suites Nos. 1, 5 & 6, Rachmaninov Prokofiev Cello Sonatas, Mendelssohn Piano Trios, Op. 49 & Op. 6
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+8points
8of 8voted this as helpful.
Create incredible images every day, anywhere with Adobe Creative Cloud Photography plan. Get the magic of Adobe Photoshop CC and Adobe Photoshop Lightroom CC, plus everything else you need to organize, enhance, and share your photos like a pro on your desktop and mobile devices.
Customer Rating
4
Still perfer local software to CC
on February 6, 2018
Posted by: SonyCameraGuy
from Cary, NC
I have been a long-time user of Lightroom and Photoshop Elements. Over 90% of my post-processing is done in Lightroom (LR) with occasional calls to Photoshop for doing more elaborate healing, creating layered effects, and merging photos. The following describes my experience moving from this workflow to the Creative Cloud (CC) environment. Pleases note that there two versions of LR in the “Photography Plan”, a local version with full functionality (Lightroom Classic CC [LRCCC]) for the Windows and iOS operating systems and a somewhat less functional, cloud-based version (Lightroom CC [LRCC]) accessible on most mobile and web-enabled platforms. The version of Photoshop provided in the Photography Plan runs locally and can open local and files synched in the CC environment.
The first thing I did was import images into the CC environment. This was done by importing local files into Lightroom CC (LRCC) or by opening local files in Photoshop CC (PSCC) and “sharing” them with LRCC. Photos “shared” with LRCC eventually appeared in the synched catalog in Lightroom Classic CC (LRCCC).
During navigation to local content in LRCC, I noted that some of the file menus were not optimized for a 4K display. This made folder navigation a challenge.
Even with 200 MBps internet speed, synching 43 MB raw files in LRCC took about 30sec/photo. Be prepared to wait a while to upload and synch lots of files. Also keep in mind that virtual copies of photos created and edited in LRCCC are not synched in LRCC or PSCC. This was a real inconvenience when I had created two versions of an image from the same raw file.
You can only synch one LRCCC catalog at a time with LRCC. Images imported into LRCCC can be automatically synched with LRCC by adding them to a synched collection. I decided to try the system out on one catalog (A) and later decided to use another (B) by enabling “Synch with Lightroom CC” under my name in the top-left corner of LRCCC. After setting B as my synch catalog, previously synched photos from A began appearing “uninvited” in B. I tried removing them from LRCCC B, but they kept reappearing. Online help suggested that there was no way to remove them from the LRCC catalog without deleting them from the local disk. I copied the raw images to a backup location and deleting them from the LRCC catalog. It turned out that they were not deleted from my local disk after all. The difference between the claimed and actual behavior was unexpected and not in a bad way.
After importing a bunch of photos individually into LRCC, I discovered that a collection of photos within the synched catalog in LRCCC can be designated as synched. These photos will synch with LRCC and PSCC without having to import them individually in the CC platforms. However, once synched, a photo remains synched even when it is removed from the synched collection. Deleting images in LRCC is the only way I have found to un-synch them.
Having a photo open in the Develop module of LRCCC will prevent changes in LRCC from being applied. Be sure to go to Library module in LRCCC before editing images in LRCC. Changes in LRCC can take a few minutes to appear in LRCCC.
LRCC was easy to install on my iPhone and it was nice to be able to edit and synch photos taken with my phone. However, I don’t typically use my phone for any serious photographic projects. I did like that the mobile version does not use cellular data by default. Like LRCC on other platforms, phone-based edits to synched photos take a few minutes to refresh on LRCCC.
CC should not be considered as a replacement for local storage and a reliable backup system. It would be very easy to fill the default 20GB of online storage offered with my subscription. You need to be very selective about what you upload to CC and use it only for working copies of images that you want to edit remotely, keeping them there only as long as you need that flexibility. One good outing with my A7R2 can easily generate more photos than the 20GB subscription would accommodate. Plans with 1TG are available for an additional $10/mo and 10TB plans are available. Still, Lightroom 6 and Photoshop Elements 2018 (even with Premier Elements included) are cheaper than the annual subscription price for the 1TB subscription. I am used to using software locally and don’t find much advantage to the CC “solution”. It does get you a full version of Photoshop and I can’t find a way to purchase the full version of Photoshop without going to the subscription service. Call me “old school”, but I prefer to have software installed and running locally. The Photographer package is still good way to get the full versions of LR and PS if Elements is not enough for you.
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+1point
1of 1voted this as helpful.
Bring soft illumination to your favorite nook with this white Philips Hue table lamp. It mimics natural light to help you relax and feel energized when you wake up, and it's bright enough to read by during story time. This Philips Hue table lamp connects to the Hue bridge, so you can control it remotely.
Customer Rating
4
Good network lighting solution
on December 12, 2017
Posted by: SonyCameraGuy
from Cary, NC
Setup:
If you don’t have a Hue bridge already, you will need one to use the lamp. The Hue bridge is easy to set up. All you need is a wired network connection on your home modem or router. I set mine up on a wired port on a child node on my wireless network and it worked fine. After the bridge is connected and turned on, you need to install the Hue app on your mobile phone or use the Hue web site to connect to the bridge. My bridge needed a software update at setup. The app said the update was complete, but pressing “Done” after the update was “successful” did nothing. I had to perform the update again (or perform a second update) before the bridge would work.
If you don’t have a Hue bridge already, you will need one to use the lamp. The Hue bridge is easy to set up. All you need is a wired network connection on your home modem or router. I set mine up on a wired port on a child node on my wireless network and it worked fine. After the bridge is connected and turned on, you need to install the Hue app on your mobile phone or use the Hue web site to connect to the bridge. My bridge needed a software update at setup. The app said the update was complete, but pressing “Done” after the update was “successful” did nothing. I had to perform the update again (or perform a second update) before the bridge would work.
Once bridge is updated and online, the app will guide you through connecting all of the Hue lights within range. Individual lights can be assigned to rooms.
Control:
Lights can be controlled individually or as a group within each room. The app will work locally over your wireless network or remotely over your phones cellular service if you establish an account at the my.meethue.com. The web interface to your my.meethue.com account will allow you to enable/disable your bridge and mobile app, but it will not allow you to control your lights. This must be done through the app.
Lights can be controlled individually or as a group within each room. The app will work locally over your wireless network or remotely over your phones cellular service if you establish an account at the my.meethue.com. The web interface to your my.meethue.com account will allow you to enable/disable your bridge and mobile app, but it will not allow you to control your lights. This must be done through the app.
There are three types of lights available for your Hue system. The basic “white” light can be dimmed, but will not vary in color, remaining fixed at 2700K. There are two types of “ambiance” bulbs. The “white ambiance” bulb can be varied from warm (2200K) to cool (6500K). With the “color ambiance” bulbs you can use any one of 16 million colors. You could get “funkadelic” with a few of these bulbs in one room. The app allows you to control the brightness and color (“ambiance” bulbs only) of each Hue bulb in your lighting network.
The app can be controlled by touch or voice commands. If you choose to share location information with the app (and have an active my.meethue.com account), you can control the behavior of your lights as you leave and return home. This might freak out those who are still in the house, but it’s possible. You can also set schedules for each bulb (or room) that vary by day of the week. You can even specify the “width” of a random window for the beginning and end of each cycle. The automation system is well thought out and implemented and great when you plan to be away from home for a few days.
Lamp:
The Wellner table lamp looks something like a stemless mushroom made of white glass. It has a few very modest bits of silicone around the base. I suggest supplementing these with something more substantial that will allow air under the base, particularly if you plan to place it directly on a wood surface. The glass globe is rather thin. The advantage is that it is not very heavy. The down side is that feels rather fragile. I recommend placing it on a stable surface where it is unlikely be get bumped.
The Wellner table lamp looks something like a stemless mushroom made of white glass. It has a few very modest bits of silicone around the base. I suggest supplementing these with something more substantial that will allow air under the base, particularly if you plan to place it directly on a wood surface. The glass globe is rather thin. The advantage is that it is not very heavy. The down side is that feels rather fragile. I recommend placing it on a stable surface where it is unlikely be get bumped.
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Safeguard up to three devices with Bitdefender Internet Security 2018 software. Multilayered ransomware protection encrypts documents to keep them safe, and its webcam protection feature warns you when an app attempts to access the device, so you can block unauthorized use. Bitdefender Internet Security 2018 software stores passwords and sensitive information for quick access.
Customer Rating
4
Low overhead, but interface could be improved
on December 11, 2017
Posted by: SonyCameraGuy
from Cary, NC
Installation:
Painless. Bitdefender recognized the presence of my prior internet security (IS) software and guided me through the process. After installation, Bitdefender still had to update the software and/or threat definitions. This would seem to make the initial “Quick Scan” prior to installation superfluous, particularly since I had a previous IS software installed.
There seems to be no need for the “Best Buy” and “Geek Squad” logos at the top of every panel.
Painless. Bitdefender recognized the presence of my prior internet security (IS) software and guided me through the process. After installation, Bitdefender still had to update the software and/or threat definitions. This would seem to make the initial “Quick Scan” prior to installation superfluous, particularly since I had a previous IS software installed.
There seems to be no need for the “Best Buy” and “Geek Squad” logos at the top of every panel.
Vulnerability Alerts:
Preface: to be fair, my prior IS software did even not flag these vulnerabilities as issues. Nonetheless, Bitdefender provided little or no guidance as to the impact of “removing” the vulnerability found.
Bitdefender detected a restricted user account on my system that I use for software training and suggested that I change the password. It might also have suggested that I delete the account. The automated “Fix” for this vulnerability took several minutes (>10min) and I decided to cancel the operation manually. If you are ever presented with this prompt, go to details and select “change the password now” and make the change manually. The prompt suggested that the “user” will be asked to change the password at the next login”. This was not the case the next time I logged into the training account. The password that I assigned was required and no prompt was initiated to change it.
Preface: to be fair, my prior IS software did even not flag these vulnerabilities as issues. Nonetheless, Bitdefender provided little or no guidance as to the impact of “removing” the vulnerability found.
Bitdefender detected a restricted user account on my system that I use for software training and suggested that I change the password. It might also have suggested that I delete the account. The automated “Fix” for this vulnerability took several minutes (>10min) and I decided to cancel the operation manually. If you are ever presented with this prompt, go to details and select “change the password now” and make the change manually. The prompt suggested that the “user” will be asked to change the password at the next login”. This was not the case the next time I logged into the training account. The password that I assigned was required and no prompt was initiated to change it.
Bitdefender found LOTS of application that were allowed to access the internet. Some may be required for functionality, some may not. No guidance is given as to which should be disabled. Many are references to files (e.g. C:\windows\syswow64\wermgr.exel) with no explanation as to their function. Matching *.exe files on your system with a database providing information on their function would be a big help. Disable internet access to particular programs with caution!
Functionality:
The main screen is a summary of the number of blocked apps, malware detected, and web-based attacks prevented. There is a string of icons on the left of the main panel, but no “mouse-over” pop-up explaining the meaning of the icons. Some are not intuitive. For example, the wrench and screwdriver icon, normally associated with configuration tasks, is an advertisement for additional services and upgrade packages. Most of the real functionality of Bitdefender is “hidden” behind a small “VIEW FEATURES” button in the middle-right of the main screen. Be aware that there are some screens where the “X” in the upper-right corner of the panel will send you back to the previous screen and others where the “<” icon in the upper-left of the panel is the path back to the previous screen. This takes some getting used to.
The main screen is a summary of the number of blocked apps, malware detected, and web-based attacks prevented. There is a string of icons on the left of the main panel, but no “mouse-over” pop-up explaining the meaning of the icons. Some are not intuitive. For example, the wrench and screwdriver icon, normally associated with configuration tasks, is an advertisement for additional services and upgrade packages. Most of the real functionality of Bitdefender is “hidden” behind a small “VIEW FEATURES” button in the middle-right of the main screen. Be aware that there are some screens where the “X” in the upper-right corner of the panel will send you back to the previous screen and others where the “<” icon in the upper-left of the panel is the path back to the previous screen. This takes some getting used to.
Wallet:
Wallet icon for is not written for 4K display. Like any other password locker, this tool should be used with caution. You may want to make sure that you lock your system whenever you leave it unattended as anyone launching a browser from your computer account will be able to login to the online accounts with stored passwords. They cannot see the passwords without the master password to the wallet, but they can use them when opening the login screens for your online accounts. You will be prompted for a password to your wallet at boot-time.
Wallet icon for is not written for 4K display. Like any other password locker, this tool should be used with caution. You may want to make sure that you lock your system whenever you leave it unattended as anyone launching a browser from your computer account will be able to login to the online accounts with stored passwords. They cannot see the passwords without the master password to the wallet, but they can use them when opening the login screens for your online accounts. You will be prompted for a password to your wallet at boot-time.
Scans:
There were some instances when a vulnerability scan could not be completed because “Window update service cannot be started because the proper credentials have not been provided.” I assume that this means that I do not login with my “Microsoft ID” (never have and never will).
There were some instances when a vulnerability scan could not be completed because “Window update service cannot be started because the proper credentials have not been provided.” I assume that this means that I do not login with my “Microsoft ID” (never have and never will).
In order to do a full system scan you must click on “VIEW FEATURES” on the home screen. It is not bundled on the same page with “Quick Scan” and “Vulnerability Scan”.
Full system scan of 6.5TB (10.6M files) on 3 volumes took 8.5h to run and the log file took over 90min to load for viewing. The log viewer seemed to stall with 99% loaded but was still chewing on 16-18% of the available CPU. Results summary took 7 minutes to load. The font in the summary is very small and does not appear to be optimized for a 4K display. Scrolling through the summary results (or even moving the window) was painfully slow with each increment of the scroll bar taking over a minute to take effect. The log viewer was behaving as though elements were being continuously added to the log and the window would spontaneously move from place to place on the screen. Fortunately, the most critical findings appear at the top of the list. Viewing the results is useless unless you have scanned a small number of files. Nonetheless, Bitdefender found and removed three Trojan in my email. These had been identified by my previous IS software, but were still hanging out in my deleted mail folder.
Full system scan of 6.5TB (10.6M files) on 3 volumes took 8.5h to run and the log file took over 90min to load for viewing. The log viewer seemed to stall with 99% loaded but was still chewing on 16-18% of the available CPU. Results summary took 7 minutes to load. The font in the summary is very small and does not appear to be optimized for a 4K display. Scrolling through the summary results (or even moving the window) was painfully slow with each increment of the scroll bar taking over a minute to take effect. The log viewer was behaving as though elements were being continuously added to the log and the window would spontaneously move from place to place on the screen. Fortunately, the most critical findings appear at the top of the list. Viewing the results is useless unless you have scanned a small number of files. Nonetheless, Bitdefender found and removed three Trojan in my email. These had been identified by my previous IS software, but were still hanging out in my deleted mail folder.
Web Browsing (IE11):
Bitdefender added an between 0.21 of 0.07sec to load each page while browsing depending on the sites visited. This is somewhat better than my prior IS software. I have also noticed an increase in the number of web sites that stop responding. While I cannot definitively attribute the problem to Bitdefender, the increase coincided with its installation.
Bitdefender added an between 0.21 of 0.07sec to load each page while browsing depending on the sites visited. This is somewhat better than my prior IS software. I have also noticed an increase in the number of web sites that stop responding. While I cannot definitively attribute the problem to Bitdefender, the increase coincided with its installation.
Like some other IS software, Bitdefender flags “safe” and unsafe sites in Google and Bing search results. You can set up your own list of safe sites in a “Whitelist”. Be aware that Bitdefender will take your word for it and will not evaluate URLs in your Whitelist for threats.
Outlook email filter:
The settings for email protection are rather simple. There is a setting to automatically block email with Asian or Cyrillic characters and a list of “Friends” and “Spammers”. It appears that these lists must be maintained manually as Bitdefender has not added any addresses to the “Spammers” category in the week I have been using the software.
The settings for email protection are rather simple. There is a setting to automatically block email with Asian or Cyrillic characters and a list of “Friends” and “Spammers”. It appears that these lists must be maintained manually as Bitdefender has not added any addresses to the “Spammers” category in the week I have been using the software.
There are options to mark suspicious email as “read” (or left “unread”) and to leave them in your inbox or moved to the deleted folder. There is no option to send spam to “spam” folder.
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+3points
3of 3voted this as helpful.
Arlo Pro 2 keeps an eye on your home while you're away, in brilliant 1080p HD quality. Put the 100% wire-free, weather-resistant camera anywhere, indoors or out. Then, power it with the included rechargeable battery or plugged it in (when indoors) to access activity zones and 24/7 Continuous Video Recording upgrades. Use 2-way audio or remotely sound a 100+ device siren while catching every moment with night vision and advanced motion detection. You'll even get motion and sound-activated alerts and 7 days of free cloud video recordings. Arlo Pro 2 works with Amazon Alexa to make your smart home security even more simple and effective.
Customer Rating
5
Great resolution
on November 15, 2017
Posted by: SonyCameraGuy
from Cary, NC
I have the Arlo base station and 2 Arlo Pro cameras, but was interested in an upgrade to the camera resolution. It turned out that the new cameras paired easily with my old base station. I’ll keep the extra base unit as a backup if needed. Both camera models have a 130-degree viewing angle, but the 1080p HD resolution of the Pro 2 cameras is notably better than the 780p HD resolution on the Pro models. The Pro 2 cameras have some additional features (activity zones and continuous video recording [CVR]), but these features are only available when the units are plugged in (i.e. not on battery power) and the CVR feature is likely to generate larger files than can be accommodated on the 1GB of storage available with the free Basic service plan.
Setup was simple with smartphone app. I had to try twice to synchronize the first camera with the base unit, but the second paired straight away and both worked flawlessly. Cameras can be given individual names for easy reference. Three video quality modes are available and can be varied for each camera separately. Zooming and panning are possible, but these are digital features only (i.e. zoomed images are cropped). Panning is only possible when zoom is active. The camera has no optical zoom or mechanical panning capabilities. You are better off capturing the entire 130-degree image and cropping after video is recorded.
I have the free “Basic” service that includes 7 days of video “memories” on the Arlo cloud (up to 1 GB), up to 5 cameras, and 3 months of support. With the 2 new Pro 2 cameras, the 1GB limit might be more quickly reached, but I regularly clean old video footage (mostly of my cat) and I have not bumped into the 1GB limit over a week of use.
WiFi connectivity between all 4 cameras (2 x Pro and 2 x Pro 2) and base unit is impressive. I have my cameras placed 25 to 40 feet away from the base unit with 2 interior walls and 1 exterior wall between and the signal strength (according to the app) is very good. These cameras are truly wireless.
Magnetic mounts are effective, but must be located out of reach when placed outside to prevent theft as the cameras are easily removed from the mount. Cameras can also be place on a flat surface without a mount. Alternative mounting options are available separately. If you don’t like white, there are black and camouflage “skins” available for the cameras.
Video and audio recordings must be stored on the Arlo cloud. This has advantages and disadvantages. Advantages: 1) facilitates remote access via smartphone app when beyond the range of your local WiFi signal; 2) no local storage medium is required. Disadvantages: 1) “Live” video (and audio) is delayed by a couple of seconds; 2) You need to trust that the Arlo cloud is reliable, private, and secure. The Arlo terms of service suggests that they are not responsible for uploaded “content”. There are two USB ports on the base unit for local storage, but this is in addition to (not instead of) cloud storage.
Video and audio recording (and other actions) on individual cameras can be triggered by motion or audio or both. The length of recording can be set for the duration of the trigger (up to 300 seconds) or can be set to a fixed length from 10 to 120 seconds. The trigger can activate an alarm and send email and notifications in-app. The alarm is VERY loud and comes from the base unit, not the cameras.
Unlike security service providers, video and audio are not monitored and you are entirely responsible for alerting authorities in the event of emergencies.
Be prepared to receive LOTS of emails and in-app notifications and, likely, a bump in your cell phone data usage if you use your smart phone to watch video. The sensitivity of motion detection can be adjusted separately for each camera. The default setting (“80%”) is quite sensitive and can be triggered by reflection from windows. Each camera can be turned off manually. The system can also be turned on and off and can be scheduled to come on at specific times for each day of the week. There is a built-in infrared (IR) light source that allows black/white “night vision”. In IR mode, near objects and reflective surfaces are very bright. The two-way audio feature is nice and output volume is loud enough to have a conversation (considering the push-to-talk delay). Some browsers (e.g. Internet Explorer) do not support the push-to-talk feature required for two-way audio.
The rechargeable batteries in my two older cameras actually do last up to 6 months without a charge. I have no doubt that the batteries will perform similarly on the Pro 2 cameras. Extra batteries can be purchased. If you do not purchased the optional charging station, batteries must be charged (indoors) in the camera.
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+3points
3of 3voted this as helpful.
Make smoothies, sauces or purees with this 1500W Ninja blender. It has 10 preset programs to ensure ingredients are properly blended, and 10 manual mode speeds give you complete control when blending tough ingredients. This Ninja blender holds up to 72 ounces.
Customer Rating
5
An intelligent beast of a blender, but a bit loud
on October 30, 2017
Posted by: SonyCameraGuy
from Cary, NC
There are 10 intelligent (IQ) modes: Flour, Frozen Drink, Extract, Smoothie, Soup, Ice Cream, Puree, Dip/Salsa, Dressing, and Nut Butter.
Cleaning mode: probably my favorite! While the pitcher, lid, and cap are dishwasher safe, I much prefer to use “cleaning mode” to clean the pitcher. The blades cannot be removed and this mode cleans everything in 30 seconds!
Soup mode: I thought it was overkill for the IQ soup mode to operate for 1.5 minutes. The results convinced me otherwise. Butternut squash soup was perfect! The machine seemed to sense the resistance of the contents and pulsed until the chunks of sautéed squash were small before going into “puree” and then to “warp” speed.
I am looking forward to trying the other modes.
The 72 oz pitcher is large enough for almost any job. The tamping rod is just long enough to move the contents, but not long enough to ever touch the blades. I suggest a long, slim silicone spatula to help get everything from the bottom of the pitcher without damaging the blades, which are VERY sharp.
The only down side to this blender is the noise. Do not use the blender if anyone in the house is trying to sleep. I would even go so far as to recommend hearing protection if you use it in a confined space.
The only down side to this blender is the noise. Do not use the blender if anyone in the house is trying to sleep. I would even go so far as to recommend hearing protection if you use it in a confined space.
Notwithstanding the noise, the capacity, power, speed, and intelligent modes make this a top-notch product.
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Tune out the world and lose yourself in music with these Sony 1000X wireless noise-cancelling headphones. Equipped with SENSE ENGINE technology, these earbuds make it easy to adjust sound modes with a single touch, so you control what you hear. Compact and intuitive, these Sony 1000X wireless noise-cancelling headphones stay comfortable for hours.
Customer Rating
4
Truly wireless Bluetooth earphones
on October 23, 2017
Posted by: SonyCameraGuy
from Cary, NC
Setup:
Start-up instructions were pictorial and a bit cryptic. A few words would have been nice (e.g. NFC connection instructions are on the second page and could have been used in place of the Bluetooth setup instructions on the first page). Nonetheless, I followed the instructions from step 1 and encountered no problems. Instructions suggested charging in carrying case for 1.5h. I did not try to use/pair them out of the box. The left earpiece went directly into pairing mode when removed from the case and was easily paired with my Bluetooth source (Samsung S4 Active). The right earpiece automatically connected to the left one when it was removed from the charging case. I had some difficulty getting any sound from the Neutron music app and had to resort to the native Android music player. However, after switching to and then removing my favorite wired in-ear-monitors (IEMs), Neutron seemed happy to send output to the WF-1000X. This was likely a configuration issue with Neutron and not a problem with the Sony headset.
Start-up instructions were pictorial and a bit cryptic. A few words would have been nice (e.g. NFC connection instructions are on the second page and could have been used in place of the Bluetooth setup instructions on the first page). Nonetheless, I followed the instructions from step 1 and encountered no problems. Instructions suggested charging in carrying case for 1.5h. I did not try to use/pair them out of the box. The left earpiece went directly into pairing mode when removed from the case and was easily paired with my Bluetooth source (Samsung S4 Active). The right earpiece automatically connected to the left one when it was removed from the charging case. I had some difficulty getting any sound from the Neutron music app and had to resort to the native Android music player. However, after switching to and then removing my favorite wired in-ear-monitors (IEMs), Neutron seemed happy to send output to the WF-1000X. This was likely a configuration issue with Neutron and not a problem with the Sony headset.
Sony Headphones Connection App:
While I rarely recommend installing the app accompanying most headphones, the Sony Headphone Connection (SHC) app is an exception. The SHC app allows you customize the noise-cancelling (NC) features for the WF-1000X. On Android, the app needs the following permissions:
• GPS and network location information
• Read/Modify/Delete contents on SD card
• Full network access and view network connections
• Access Bluetooth settings and pair Bluetooth devices
• Prevent phone from sleeping
The app will send some personally identified information back to Sony. You can opt out for some items by going to the online privacy statement (accessed through the EULA).
Location information is used by the adaptive location-dependent NC feature.
The app also includes some (relatively useless) equalization (EQ) presets which cannot be modified and, in my opinion, diminish the overall sound quality (SQ) without an accompanying increase in volume. I could not find a way to customize any of the EQ settings to my personal preferences. “Off” is the best EQ setting IMHO.
The app also allows you to select from two Bluetooth communication protocols (“Priority to Sound Quality” [A2PD] and “Priority to Stable Connection” [SBC]). If the sound is intermittent in the right earphone (or both earphones), as it was for me in my office environment with lots of 2.4GHz interverence, you will need to select the “Priority to Stable Connection” option and be content with the lower complexity codec [see https://en.wikipedia.org/wiki/SBC_(codec)]. It’s not that bad and reduces the drop-outs in environments with high 2.4GHz interference.
NC is OK, but isolation seems to have the biggest impact on muting external sounds. I have not tested the adaptive (i.e. location-dependent) NC feature.
While I rarely recommend installing the app accompanying most headphones, the Sony Headphone Connection (SHC) app is an exception. The SHC app allows you customize the noise-cancelling (NC) features for the WF-1000X. On Android, the app needs the following permissions:
• GPS and network location information
• Read/Modify/Delete contents on SD card
• Full network access and view network connections
• Access Bluetooth settings and pair Bluetooth devices
• Prevent phone from sleeping
The app will send some personally identified information back to Sony. You can opt out for some items by going to the online privacy statement (accessed through the EULA).
Location information is used by the adaptive location-dependent NC feature.
The app also includes some (relatively useless) equalization (EQ) presets which cannot be modified and, in my opinion, diminish the overall sound quality (SQ) without an accompanying increase in volume. I could not find a way to customize any of the EQ settings to my personal preferences. “Off” is the best EQ setting IMHO.
The app also allows you to select from two Bluetooth communication protocols (“Priority to Sound Quality” [A2PD] and “Priority to Stable Connection” [SBC]). If the sound is intermittent in the right earphone (or both earphones), as it was for me in my office environment with lots of 2.4GHz interverence, you will need to select the “Priority to Stable Connection” option and be content with the lower complexity codec [see https://en.wikipedia.org/wiki/SBC_(codec)]. It’s not that bad and reduces the drop-outs in environments with high 2.4GHz interference.
NC is OK, but isolation seems to have the biggest impact on muting external sounds. I have not tested the adaptive (i.e. location-dependent) NC feature.
Comfort:
The earphones are relatively large, but fit comfortably and snuggly (for me) with the medium tips and smaller “wings”. The ear tips provide some isolation, but, while Sony refers to the design as “closed dynamic”, there is no back-suction on removal. The only “discomfort” for me is the occasional annoying click when changing apps and low-frequency noise when NC over-corrects.
The earphones are relatively large, but fit comfortably and snuggly (for me) with the medium tips and smaller “wings”. The ear tips provide some isolation, but, while Sony refers to the design as “closed dynamic”, there is no back-suction on removal. The only “discomfort” for me is the occasional annoying click when changing apps and low-frequency noise when NC over-corrects.
Bluetooth:
Bluetooth range is adequate for most purposes, at least 30 feet in “line-of-sight” or less depending on physical obstacles. For environments with high 2.4GHz interference, I recommend the “Priority on Stable Connection” option in the HPC app.
Bluetooth range is adequate for most purposes, at least 30 feet in “line-of-sight” or less depending on physical obstacles. For environments with high 2.4GHz interference, I recommend the “Priority on Stable Connection” option in the HPC app.
Microphone & remote control:
From what friends and colleagues tell me, the microphone works well with good voice quality and no feedback. Audio for phone calls comes only from the left earphone. Both earphones contain a microphone for NC, but only the left functions during telephone calls. A small button on the right earphone allows you to accept incoming calls and disconnects calls when you are done. To my knowledge, there is no button to pause/play or forward/back functionality.
From what friends and colleagues tell me, the microphone works well with good voice quality and no feedback. Audio for phone calls comes only from the left earphone. Both earphones contain a microphone for NC, but only the left functions during telephone calls. A small button on the right earphone allows you to accept incoming calls and disconnects calls when you are done. To my knowledge, there is no button to pause/play or forward/back functionality.
Battery:
The downfall of many Bluetooth devices, battery life. Doubly so when playing music and processing external noise for active NC. The WF-1000X “solves” this problem with a nifty carrying case that charges the earpieces when not in use. Sony claims 9hr of battery life, but, with NC enabled, the earpieces will only go for 3hr of continuous listing without recharging in the case. Battery life will depend a lot on usage (NC vs no NC; standby vs active listening, etc.). Don’t expect to use them continuously on a transcontinental flight.
The downfall of many Bluetooth devices, battery life. Doubly so when playing music and processing external noise for active NC. The WF-1000X “solves” this problem with a nifty carrying case that charges the earpieces when not in use. Sony claims 9hr of battery life, but, with NC enabled, the earpieces will only go for 3hr of continuous listing without recharging in the case. Battery life will depend a lot on usage (NC vs no NC; standby vs active listening, etc.). Don’t expect to use them continuously on a transcontinental flight.
Sound Quality:
Were it not for the Bluetooth connection, these would near-audiophile quality IEMs. The sound signature is surprisingly flat. Instrument separation and sound stage are good. Treble and mids are well-reproduced. Bass is forward, but a bit muddy compared to a reference-quality wired balanced armature IEM and headphones (think Etymotic ER4SR and Sennheiser HD600, respectively).
System sounds (i.e. button push tones, app change “clicks”, etc.) can be annoying and changes in the output mode using the HPC app can pause playback.
The closed design is a blessing and a curse. The blessing, you can’t hear what is going on around you. The curse, you can’t hear what is going on around you. The adaptive and user-selectable NC behavior is a help here. I was not fatigued listening for several hours.
The following albums were sampled during my review:
• Adam Harasiewicz: Chopin Nocturnes & Preludes
• Adrian Legg: Waiting for a Dancer
• Antonio Pleeth: 6 Geminiani cello sonatas
• Beatles: 1
• Billy Mclaughlin: Fingerdance
• Bonnie Raitt: Road Tested
• Calum Graham: Phoenix Rising
• Creed: My Own Prison
• Dirks und Wirtz: Kinski Spencer Gismonti
• Don Ross: PS15
• Earl Klugh: Whispers and Promises
• Francois Sciortino: French Guitar
• Giovanni Palombo: La melodia segreta, A Secret Melody
• Goran Sollscher: Eleven-String Baroque
• Hoff Ensemble: Quiet Winter Night
• Jewel: Spirit
• Jian Wang: The Baroque Album
• Joe Satriani, Surfing with the Alien, Crystal Planet, Flying in a Blue Dream, Unstoppable Momentum
• John Doan: A Celtic Pilgrimage
• John Williams: The Guitarist
• Julian Webber: Elgar Cello Concerto - Saint-Saens Cello Concerto No.1
• Krzysztof Meisinger: Villa-Lobos Melodia Sentimental
• Laurence Juber: Guitar Noir
• Lawson Rollins: Elevation
• Los Angeles Spin
• Luca Stricagnoli: Luca Stricagnoli
• Markus Segschneider: Snapshots
• Michel Haumont: Michel Haumont & Co
• Mike Dawes: What Just Happened
• Miles Davis: Kind of Blue
• Mstislav Rostropovich: Beethoven The Cello Sonatas- Vol1&2, Chopin Cello Sotatas, Schubert Schuman Debusy Cello Sonatas, The Brahms Sonatas, Vivaldi - Tartini - Boccherini Cello Concertos
• Nora Jones: Come Away with Me
• Oslo String Quartet: The Shubert Connection
• Peppino D'Agostino: Acoustic Guitar
• Ryan LeBlanc: Speechless
• Sarah Mclachlan: Fumbling Towards Ecstasy, Surfacing
• Sergio & Odair Assad: Sérgio & Odair Assad Play Piazzolla
• Steve Vai: The Ultra Zone, Fire Garden
• Tomasz Gaworek: Born To Be Together
• Tori Amos: Little Earthquakes
• TRONDHEIMSOLISTENE: In Folk Style, Souvenir I & II,
• Vladimir Horowitz: Rachmaninov Piano Concerto #3
• Yo-Yo Ma: Bach Cello Suites Nos. 1, 5 & 6, Rachmaninov Prokofiev Cello Sonatas, Mendelssohn Piano Trios, Op. 49 & Op. 6
Were it not for the Bluetooth connection, these would near-audiophile quality IEMs. The sound signature is surprisingly flat. Instrument separation and sound stage are good. Treble and mids are well-reproduced. Bass is forward, but a bit muddy compared to a reference-quality wired balanced armature IEM and headphones (think Etymotic ER4SR and Sennheiser HD600, respectively).
System sounds (i.e. button push tones, app change “clicks”, etc.) can be annoying and changes in the output mode using the HPC app can pause playback.
The closed design is a blessing and a curse. The blessing, you can’t hear what is going on around you. The curse, you can’t hear what is going on around you. The adaptive and user-selectable NC behavior is a help here. I was not fatigued listening for several hours.
The following albums were sampled during my review:
• Adam Harasiewicz: Chopin Nocturnes & Preludes
• Adrian Legg: Waiting for a Dancer
• Antonio Pleeth: 6 Geminiani cello sonatas
• Beatles: 1
• Billy Mclaughlin: Fingerdance
• Bonnie Raitt: Road Tested
• Calum Graham: Phoenix Rising
• Creed: My Own Prison
• Dirks und Wirtz: Kinski Spencer Gismonti
• Don Ross: PS15
• Earl Klugh: Whispers and Promises
• Francois Sciortino: French Guitar
• Giovanni Palombo: La melodia segreta, A Secret Melody
• Goran Sollscher: Eleven-String Baroque
• Hoff Ensemble: Quiet Winter Night
• Jewel: Spirit
• Jian Wang: The Baroque Album
• Joe Satriani, Surfing with the Alien, Crystal Planet, Flying in a Blue Dream, Unstoppable Momentum
• John Doan: A Celtic Pilgrimage
• John Williams: The Guitarist
• Julian Webber: Elgar Cello Concerto - Saint-Saens Cello Concerto No.1
• Krzysztof Meisinger: Villa-Lobos Melodia Sentimental
• Laurence Juber: Guitar Noir
• Lawson Rollins: Elevation
• Los Angeles Spin
• Luca Stricagnoli: Luca Stricagnoli
• Markus Segschneider: Snapshots
• Michel Haumont: Michel Haumont & Co
• Mike Dawes: What Just Happened
• Miles Davis: Kind of Blue
• Mstislav Rostropovich: Beethoven The Cello Sonatas- Vol1&2, Chopin Cello Sotatas, Schubert Schuman Debusy Cello Sonatas, The Brahms Sonatas, Vivaldi - Tartini - Boccherini Cello Concertos
• Nora Jones: Come Away with Me
• Oslo String Quartet: The Shubert Connection
• Peppino D'Agostino: Acoustic Guitar
• Ryan LeBlanc: Speechless
• Sarah Mclachlan: Fumbling Towards Ecstasy, Surfacing
• Sergio & Odair Assad: Sérgio & Odair Assad Play Piazzolla
• Steve Vai: The Ultra Zone, Fire Garden
• Tomasz Gaworek: Born To Be Together
• Tori Amos: Little Earthquakes
• TRONDHEIMSOLISTENE: In Folk Style, Souvenir I & II,
• Vladimir Horowitz: Rachmaninov Piano Concerto #3
• Yo-Yo Ma: Bach Cello Suites Nos. 1, 5 & 6, Rachmaninov Prokofiev Cello Sonatas, Mendelssohn Piano Trios, Op. 49 & Op. 6
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+1point
2of 3voted this as helpful.
Provide ample battery power for your Apple Watch with this Belkin MIXIT DuraTek charge cable. Its inner fiber liner adds strength and durability, and the 4-foot length offers plenty of leeway between the wall and your nightstand. This Belkin MIXIT DuraTek charge cable has protective insulation to shield the wires from damage as it bends and flexes.
Customer Rating
5
Great Apple Watch charging cable
on October 16, 2017
Posted by: SonyCameraGuy
from Cary, NC
The best part about the Belkin mixit cable… it’s about a foot longer than the charging cable that came with my Apple Watch. The double-braided nylon and shielded cable is a bit thicker than the original, and, while not as flexible, it is reasonably so. The sheath at both ends of the cable is more substantial and the Kevlar core keeps the cable from stretching. I don’t bend or stretch my cables, but the extra durability can’t hurt. This is the most robust Apple Watch charging cable out there.
Once, my Apple Watch did recognize that it was not connected to an “official” Apple charging cable. Nonetheless, my watch has charged normally every night for over a week.
The only down side is that it does not come with a charger. I’m using the white Apple charger with the black Belkin cable. If it matters, you can get a black 1 amp USB charger to match (or go for the Belkin rose gold cable). ;-)
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Upgrade your business presentations with this Epson projector. It has built-in speakers for clear audio, and the lamp can run for up to 10,000 hours in economic mode. This Epson projector casts images as small as 33.1 inches and as large as 320 inches and works with several video inputs.
Customer Rating
4
Nice classroom projector
on October 7, 2017
Posted by: SonyCameraGuy
from Cary, NC
Setup:
This projector is a very simple plug-and-play. There are no drivers to install if you are using HDMI or VGA input. USB video display software must be installed to use the USB-B input. The VS355 can be used on a table or mounted to the ceiling. Ceiling mounting hardware is sold separately.
This projector is a very simple plug-and-play. There are no drivers to install if you are using HDMI or VGA input. USB video display software must be installed to use the USB-B input. The VS355 can be used on a table or mounted to the ceiling. Ceiling mounting hardware is sold separately.
Input:
HDMI is by far the most convenient and universally compatible with modern computers and other audio/video (A/V) sources. No HDMI cable is provided with the VS355.
VGA offers video only, but is backwardly compatible with older computers (and other video sources) with VGA output ports. The VS355 comes with a VGA cable. If your video source has composite video (i.e. one RCA jack for red, green, and blue), you will need a composite RCA to VGA cable to use with the VS355.
RCA jacks (female) are available for audio (right and left) and video. A cable for RCA input is not provided with the VS355. Note that the video signal uses only one jack and will not work for composite video devices with separate jacks for red, green, and blue signals (see comment above for VGA). While I have not done so myself, it should be possible to use the VGA input for video and the RCA input for audio (only).
USB-B input is available on the VS355, but you will need a USB cable and installation of the Epson’s USB Display driver software.
USB-A input is a nice idea, but there are inconvenient restrictions to its use. Devices must be USB Mass Storage Class-compliant, formatted in FAT or FAT32, self-powered (i.e. require no bus power), and can have only one partition. Only a limited number of file formats are supported (.jpg, .bmp, .gif, .png, and .avi) and there are notable limitations on the file size, resolution, and format for each file type. You can check out page 99 of the User’s Guide (https://files.support.epson.com/docid/cpd5/cpd53733.pdf) for details.
Wireless(?):
Not out of the box with the VS355. The projector can be used on a wireless network, but you must purchase a separate wireless adapter that inserts into the USB-A port on the VS355. The VS355 is not listed among the compatible projectors on any of the eight wireless modules on Epson’s web site. My best guess (based on projector models mentioned in the VS355 User’s Guide) is that you will need the “Wireless LAN Module (ELPAP10)” for the VS355. You will need to call Epson to confirm compatibility. There is an odd-looking bit of plastic that comes with the VS355. This is the retention clip for the wireless transceiver should you decide to purchase one.
HDMI is by far the most convenient and universally compatible with modern computers and other audio/video (A/V) sources. No HDMI cable is provided with the VS355.
VGA offers video only, but is backwardly compatible with older computers (and other video sources) with VGA output ports. The VS355 comes with a VGA cable. If your video source has composite video (i.e. one RCA jack for red, green, and blue), you will need a composite RCA to VGA cable to use with the VS355.
RCA jacks (female) are available for audio (right and left) and video. A cable for RCA input is not provided with the VS355. Note that the video signal uses only one jack and will not work for composite video devices with separate jacks for red, green, and blue signals (see comment above for VGA). While I have not done so myself, it should be possible to use the VGA input for video and the RCA input for audio (only).
USB-B input is available on the VS355, but you will need a USB cable and installation of the Epson’s USB Display driver software.
USB-A input is a nice idea, but there are inconvenient restrictions to its use. Devices must be USB Mass Storage Class-compliant, formatted in FAT or FAT32, self-powered (i.e. require no bus power), and can have only one partition. Only a limited number of file formats are supported (.jpg, .bmp, .gif, .png, and .avi) and there are notable limitations on the file size, resolution, and format for each file type. You can check out page 99 of the User’s Guide (https://files.support.epson.com/docid/cpd5/cpd53733.pdf) for details.
Wireless(?):
Not out of the box with the VS355. The projector can be used on a wireless network, but you must purchase a separate wireless adapter that inserts into the USB-A port on the VS355. The VS355 is not listed among the compatible projectors on any of the eight wireless modules on Epson’s web site. My best guess (based on projector models mentioned in the VS355 User’s Guide) is that you will need the “Wireless LAN Module (ELPAP10)” for the VS355. You will need to call Epson to confirm compatibility. There is an odd-looking bit of plastic that comes with the VS355. This is the retention clip for the wireless transceiver should you decide to purchase one.
Remote:
All of the projector’s features and menu system can be accessed through the remote control. This is a great convenience if you have your VS355 mounted on the ceiling. The remote does not have an integrated laser pointer, but there is an on-screen digital pointer that can be operated with arrow keys on the remote. This feature is only enabled when using HDMI and USB-B input.
The split key on the remote allows side-by-side images from two video input sources. The remote also has a digital zoom and the arrow keys let you pan in four directions.
There are two IR receiver, on the front and one in the back to allow the remote to function from almost any angle.
All of the projector’s features and menu system can be accessed through the remote control. This is a great convenience if you have your VS355 mounted on the ceiling. The remote does not have an integrated laser pointer, but there is an on-screen digital pointer that can be operated with arrow keys on the remote. This feature is only enabled when using HDMI and USB-B input.
The split key on the remote allows side-by-side images from two video input sources. The remote also has a digital zoom and the arrow keys let you pan in four directions.
There are two IR receiver, on the front and one in the back to allow the remote to function from almost any angle.
Output:
Video output on the VS355 has a native resolution of 1280 x 800 pixels (WXGA) with a 16:10 aspect ratio. The maximum recommended projection distance is about 16 feet. The bulb takes about 30sec to come to full brightness. While the 1280 x 800 resolution will be a step back for most users accustomed to “monitor-quality” viewing experience, it is more than sufficient for a classroom or small conference room presentation.
Horizontal (slider behind the lens) and vertical (buttons on the top) keystone adjustments are easy and intuitive. There are 5 preset color profiles, but brightness, contrast, saturation, tint, sharpness, and color temperature are each individually customizable. There is even a noise reduction option for smoothing out the “grain” in images.
Audio output is the weakest part of the VS355 and limited to a single 2-inch speaker in the rear of the projector. It will provide reasonable volume for a small conference room, but not much more. If you need high-quality audio output, I would highly recommend getting a separate dedicated system for this purpose.
Video output on the VS355 has a native resolution of 1280 x 800 pixels (WXGA) with a 16:10 aspect ratio. The maximum recommended projection distance is about 16 feet. The bulb takes about 30sec to come to full brightness. While the 1280 x 800 resolution will be a step back for most users accustomed to “monitor-quality” viewing experience, it is more than sufficient for a classroom or small conference room presentation.
Horizontal (slider behind the lens) and vertical (buttons on the top) keystone adjustments are easy and intuitive. There are 5 preset color profiles, but brightness, contrast, saturation, tint, sharpness, and color temperature are each individually customizable. There is even a noise reduction option for smoothing out the “grain” in images.
Audio output is the weakest part of the VS355 and limited to a single 2-inch speaker in the rear of the projector. It will provide reasonable volume for a small conference room, but not much more. If you need high-quality audio output, I would highly recommend getting a separate dedicated system for this purpose.
Design:
The VS355 is light, compact, and well designed for a classroom or small conference room environment. The fan is a bit noisy, but is a small sacrifice for longer lamp life. The cooling air inlet has a removable filter to keep dust out of the lamp housing. Epson recommends cleaning the filter with a light (i.e. computer) vacuum or small brush. Replacement filters are available for purchase. The lamp is behind the small speaker and seems relatively easy to replace. The VS355 will alert you (presumably on screen) when the filter or lamp need attention.
The VS355 is light, compact, and well designed for a classroom or small conference room environment. The fan is a bit noisy, but is a small sacrifice for longer lamp life. The cooling air inlet has a removable filter to keep dust out of the lamp housing. Epson recommends cleaning the filter with a light (i.e. computer) vacuum or small brush. Replacement filters are available for purchase. The lamp is behind the small speaker and seems relatively easy to replace. The VS355 will alert you (presumably on screen) when the filter or lamp need attention.
My Best Buy number: 2655526669
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
SonyCameraGuy's Review Comments
With 700W of power and 10 power levels, this LG LCS0712ST 0.7 cu. ft. compact microwave lets you prepare a wide variety of delicious meals. The EasyClean feature simplifies the cleaning process, and the clock keeps you notified of the time.
Overall5 out of 5
5 out of 5Great Compact Microwave
By PawX4
from Cary, NC
I had to return an older model that was damaged in shipment. This one is perfect as a shelf-top microwave. It has plenty of power. The interface is not conventional, but it is easy to use and has almost all of the features of its larger cousins. There is no temperature probe and no numeric key pad to enter time. Unless you need a larger size, there is no reason to look for anything else.
The only down side is the "tune" that it plays when starting and stopping. A simple tone would have sufficed.
SonyCameraGuy
Cary, NC
Review for the wrong microwave
July 1, 2017
The review above was for the 0.9 cubic foot LG microwave. It replaced the 0.7 cubic foot microwave that was damaged in shipment.
0points
0of 0voted this comment as helpful.
We know pets makes messes. Whether it's tracked-in mud or bathroom accidents, BISSELL® ProHeat 2X® Revolution® Pet Pro Plus carpet cleaner handles those though pet messes with its exclusive Pet Pro Cleanup System. This system includes a CleanShot® pretreater to remove spots and stains; the 2-in-1 Pet Upholstery Tool to remove pet hair, stains and odors from upholstery, a trial-size of BISSELL® PET PRO OXY Urine Eliminator formula, and an EZ Clean Brush Roll Cover to make maintaining the machine easy. When used in MAX Clean Mode, you get powerful cleaning that outcleans the leading rental*** and leaves carpet dry in about 30 minutes with Express Clean Mode.** All of this cleaning power comes in a lightweight and maneuverable machine with a low-profile foot that gets under furniture. But this machine doesn't just pick up after pets, it helps save them, too. BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear.***Cleaning results based on ASTM F2828 using BISSELL PET PRO OXY Urine Eliminator formula in MAX clean mode against the Rug Doctor Mighty Pro X3 carpet cleaner using their top selling formula.**Express Clean Mode (reference instruction in user guide). Tested on new carpet with protectant. Results may vary.
Overall4 out of 5
4 out of 5Cleans well, but it's very noisy
By SonyCameraGuy
from Cary, NC
Disclaimer: My home is in the middle of a remodel and I have not had the opportunity to test the unit on indoor carpet.
The unit was easy to assembly. There is a handy mesh bag for storing the tools and hose. This model does not come with a hard floor attachment. And, despite the fact that one is pictured in the User’s Manual, Bissell does not yet offer a hard floor attachment for this model. There are several hard floor attachments advertised on the Bissell web site, but none are compatible with this model (1986). This was a real disappointment for me since the first task I had planned for this unit was to clean “mud” and drywall dust from the hardwood floor in our partially remodeled den.
I have had a chance to test the unit on the floor mats and cargo area of my car. The ”deep stain tool” did a great job on both areas and the cleaning solution removed some stains that I thought were permanent. Moving slowly over the wet areas will pick up more dirty water and leave the mats almost dry enough to use.
I hope to give this product a more thorough test and update this review once the protective plastic comes off my carpet.
As a caution, don’t fill the clean water reservoir while it is sitting on a counter. This will depress the release valve on the bottom of the reservoir and your counter will get wet. Also be aware that not all links to the User’s Guide on Bissell’s web site work. If you have trouble, try this one: https://bissellmedia.azureedge.net/-/media/site-us/documents/user-guides/1986/bissell_user_guide_proheat_2x_revolution_1964_1986_2007_series.pdf?la=en&modified=20170202170006&cdnv=1
If you are expecting quiet, this Bissell unit is anything but. I would seriously consider hearing protection if you intend to use it in an small enclosed area. It’s Noisy!
SonyCameraGuy
Cary, NC
5-star all the way!
July 2, 2017
After our renovation the Bissell got a real workout. The gunk that it got out of a freshly vacuumed carpet was amazing! Better than that, this Bissell was designed to be cleaned easily and completely. No more funky mess to fester in the machine between uses. They also now offer a bare floor attachment (not available at the time of my initial). Sorry for the initial 4-star rating. This machine is 5+ all the way!
0points
0of 0voted this comment as helpful.
SonyCameraGuy's Questions
SonyCameraGuy has not submitted any questions.
Enjoy a stunning LED display with this 27-inch LG monitor. The 4K UHD resolution and VESA DisplayHDR deliver vivid scenes to keep you captivated by your favorite shows and movies, and IPS technology maintains consistent colors at various viewing angles. This LG monitor's Radeon FreeSync matches your graphics card's frame rate for a stutter-free experience.
This monitor have the remote control
Enjoy a stunning LED display with this 27-inch LG monitor. The 4K UHD resolution and VESA DisplayHDR deliver vivid scenes to keep you captivated by your favorite shows and movies, and IPS technology maintains consistent colors at various viewing angles. This LG monitor's Radeon FreeSync matches your graphics card's frame rate for a stutter-free experience.
How do I connect monitor with my iPad.
You would need a Lightening to HDMI converter and you may be limited to 4:3 aspect ratio (not 16:9).
5 years, 4 months ago
by
SonyCameraGuy
Only at Best Buy Listen in comfort with these Jabra Elite 85h wireless headphones. Integrated SmartSound audio technology adapts automatically to your surroundings, while a powerful battery offers up to 36 hours of playtime. These Jabra Elite 85h wireless headphones feature eight separate mics for excellent call quality and are rain-resistant for safe use in all weather conditions.
I've heard some reviews say that these headphones have a "hands free" voice assistant, with support for Google Assistant and Siri. Do they even have a hands free assistant? If so, is there a way to turn off the always listening voice assistant (Alexa)?
The voice assistant is only activated when you push the button on the back of the right ear-cup.
5 years, 6 months ago
by
SonyCameraGuy
Film underwater scenes in 4K with this 12-megapixel GoPro HERO7 action camera. Its HyperSmooth stabilization feature lets you capture shake-free videos, and it withstands submersion up to 33 feet without a waterproof case. Stream captured videos from this rugged GoPro HERO7 action camera on Facebook Live via the companion app.
Can it be used as a dash camera
Yes. I suggest loop mode connected to a USB power source.
6 years ago
by
SonyCameraGuy
Enjoy big-screen entertainment with this Epson 3LCD portable projector. All-digital HDMI connectivity lets you stream from a variety of devices, and 3,300 lumens of equal color and white brightness let you use it in almost any lighting condition. This Epson 3LCD projector lets you view images up to 25 times larger than those on a 60-inch TV.
does this device support sd card input
You can use USB-B input with a card reader, but there is no SD card slot in the unit.
6 years, 7 months ago
by
SonyCameraGuy
Enjoy big-screen entertainment with this Epson 3LCD portable projector. All-digital HDMI connectivity lets you stream from a variety of devices, and 3,300 lumens of equal color and white brightness let you use it in almost any lighting condition. This Epson 3LCD projector lets you view images up to 25 times larger than those on a 60-inch TV.
Is this projector High Definition? And does it have Bluetooth capabilities to hook up to a Bluetooth speaker?
No. This is 800x600 native resolution. It can be configured to 16:9 or 16:10, but it is not HD. The speaker is not Bluetooth compatible. RCA or HDMI connection is audio-capable.
6 years, 7 months ago
by
SonyCameraGuy
Bring soft illumination to your favorite nook with this white Philips Hue table lamp. It mimics natural light to help you relax and feel energized when you wake up, and it's bright enough to read by during story time. This Philips Hue table lamp connects to the Hue bridge, so you can control it remotely.
Does it do colors or just plain white?
The bulb that comes with this lamp is the white "ambiance" bulb and can be set from warm 2200K to cool 6500K. There are also plain white Hue bulbs can be dimmed but do not change color. There are also the color "ambiance" bulbs that can display any of 16 million colors
6 years, 10 months ago
by
SonyCameraGuy
We know pets makes messes. Whether it's tracked-in mud or bathroom accidents, BISSELL® ProHeat 2X® Revolution® Pet Pro Plus carpet cleaner handles those though pet messes with its exclusive Pet Pro Cleanup System. This system includes a CleanShot® pretreater to remove spots and stains; the 2-in-1 Pet Upholstery Tool to remove pet hair, stains and odors from upholstery, a trial-size of BISSELL® PET PRO OXY Urine Eliminator formula, and an EZ Clean Brush Roll Cover to make maintaining the machine easy. When used in MAX Clean Mode, you get powerful cleaning that outcleans the leading rental*** and leaves carpet dry in about 30 minutes with Express Clean Mode.** All of this cleaning power comes in a lightweight and maneuverable machine with a low-profile foot that gets under furniture. But this machine doesn't just pick up after pets, it helps save them, too. BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear.***Cleaning results based on ASTM F2828 using BISSELL PET PRO OXY Urine Eliminator formula in MAX clean mode against the Rug Doctor Mighty Pro X3 carpet cleaner using their top selling formula.**Express Clean Mode (reference instruction in user guide). Tested on new carpet with protectant. Results may vary.
Can you use the pro heat 2x revolution pet pro upright deep cleaner-silver/purple on tile? I have ceramic, porcelain, laminate with this work on all of these types of tile?
The Bissell Model 1986 now has a bare floor attachment (part number 1606611). It works fine on floors with a smooth surface. I have not tried it on grouted tile.
7 years, 3 months ago
by
SonyCameraGuy
Sony Alpha a7R II Mirrorless Camera Body: Photos and videos bring important moments to life thanks to a 42.4-megapixel Exmor R full-frame CMOS sensor. Instantly share images via your smartphone, PC or HDTV via built-in Wi-Fi..
What language options are on the Sony A7R II ?
Do you guys know if the Sony A7R II will come with Korean as an option if I buy it in America? Thanks in advance
I am no expert in Korean characters, but the two options available are similar enough that I suspect they are Japanese and Chinese (not Korean).
8 years, 9 months ago
by
SonyCameraGuy
Cary, NC
This APC Back-UPS BE750G UPS protects your computer system and keeps it running for up to 70 minutes in the event of a power failure.
Other than computer usage
I am looking for a backup power supply for my CPAP machine. I need this for breathing when asleep. When I lose power in the middle of the night, I can't breathe. What I need to know is will this work without using the software? I have no need for the software function, but need a longer lasting backup like this for my medical equipment.
I use this product without the software and it works fine. The software provides some monitoring functionality and can gracefully shut down a computer when the backup battery is running low, but the software is not needed for the unit to provide power. Before relying on for the CPAP, please make sure that the battery can provide the current necessary to power your machine.
10 years ago
by
SonyCameraGuy
Cary, NC