Customer reviews from greenworkstools.com
Greenworks - Pro Electric Pressure Washer up to 2300 PSI at 1.2 GPM - Green
Average customer rating
4.6
(1,627 Reviews)
Rating breakdown 1,627 reviews
5 Stars
1,269
4 Stars
245
3 Stars
36
2 Stars
26
1 Star
51
93%of customers recommend this product.
(
1,375 out of
1,471)
Customer Reviews for Greenworks - Pro Electric Pressure Washer up to 2300 PSI at 1.2 GPM - Green
Customer Rating
1
Poor quality
on May 19, 2024
Posted by: NickMahaffey
from Ohio
Gender:Male
I used my mom's pressure washer and it worked great. I bought one and used it once! The connector for the pressure hose attaches broke. I found out that my mom's broke in the same exact spot! Poor quality! Don't waste your money!
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, May 21, 2024
Hello NickMahaffey
We are sorry to hear you have experienced this, we would like to hear how this occurred. When you have a moment, please have your model number and serial number ready and contact us directly so we can look further into the matter and help locate any parts required. We can be reached through the chat on www.greenworkstools.com which will direct you to a live agent or call us at 1-888-909-6757 (1-888-90WORKS) to speak with a Live agent. We look forward to helping you better.
We are sorry to hear you have experienced this, we would like to hear how this occurred. When you have a moment, please have your model number and serial number ready and contact us directly so we can look further into the matter and help locate any parts required. We can be reached through the chat on www.greenworkstools.com which will direct you to a live agent or call us at 1-888-909-6757 (1-888-90WORKS) to speak with a Live agent. We look forward to helping you better.
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Perfect
on May 25, 2024
Posted by: Adamite
from Melbourne, FL
Gender:Male
Incase you were wondering, This is the psi you were looking for.
Pros: Powerful
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Awesome Power Washer
on June 2, 2024
Posted by: Magneto75
from Franklin Square,NY
Gender:Male
If I could give this pressure washer more than 5 stars, I would. I have never used a pressure washer before so really didn’t know what to expect. This one was so easy to get started. It pretty much comes put together, you only have to do a few things before getting started
Pros: Convenient, Cost-Saver, Easy to Use, Quiet, Effective, Powerful
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Meets my needs
on June 23, 2024
Posted by: 7gthom2
from Starkville, MS
Gender:Male
[This review was collected as part of a promotion.] Replaced 14 year old Craftsman 3000 psi gas Power Washer that had developed a bad oil leak. Happy with the Greenworks electric 3000 psi electric Power Washer. Did the patio this afternoon. Transitioning all my power tools to electric and all are 80 volt Greenworks except this corded Power Washer. Happy camper.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Defective
on June 25, 2024
Posted by: Mainer81
from Maine
Gender:Male
Was excited to get this pressure washer as it had good reviews. Literally used it for 3 seconds and it just won’t turn on. Did all of the trouble shooting, electric, water, hoses etc. nothing. It junk and not happy. Do they stand by this product?
Pros: Quiet
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, June 26, 2024
Hello Mainer81.
Thank you for reaching out to us. If you have tried the following step and they do not yield results, we urge you to contact us by Chat on www.greenworkstools.com or by phone 1-888-909-6757. All we ask is you have the unit with you at the time of contact so we can help you best!
Troubleshooting Steps.
1. Cleaning Obstructed Nozzles: To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to fail to function normally.
2. Removing Air from The Line / Bleeding Out the Unit: Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3. Make sure the water source is fully opened and is at least 45 PSI. There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
We hope these suggestions help! If they do not please contact us by Chat or phone, we would like the opportunity to speak with you to see if we can find a solution.
Thank you for reaching out to us. If you have tried the following step and they do not yield results, we urge you to contact us by Chat on www.greenworkstools.com or by phone 1-888-909-6757. All we ask is you have the unit with you at the time of contact so we can help you best!
Troubleshooting Steps.
1. Cleaning Obstructed Nozzles: To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to fail to function normally.
2. Removing Air from The Line / Bleeding Out the Unit: Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3. Make sure the water source is fully opened and is at least 45 PSI. There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
We hope these suggestions help! If they do not please contact us by Chat or phone, we would like the opportunity to speak with you to see if we can find a solution.
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Assembly
on June 28, 2024
Posted by: Pattikaeke
from PA
Gender:Female
[This review was collected as part of a promotion.] Just bought this yesterday. I am not at all mechanically inclined however watching a YouTube video, I was able to assemble this product in about 15 minutes! The written instructions are pretty good, but since my skill level is so low, I felt a video would help. Now off to learn how to use it!! Never used one before!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Quit after an Hour of Use
on July 1, 2024
Posted by: BuddyLove
from Virginia
Gender:Male
Fresh out of the box, it ran for about an hour when the motor continuously revved up and down, water sprayed out without pulling the trigger, and sometimes didn't when it was pulled, then it lost enough power to no longer work.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, July 3, 2024
Hello BuddyLove,
We are sorry to hear about your experience when using this Pressure Washer. It sounds like you will need to contact us directly some further information would be required to be better assist. Please allow our team to gather some further details so that we can help find a resolution for you. We kindly ask that you give us a call at 1-888-909-6757 (1-888-90WORKS) or start a live chat on www.greenworkstools.com. All we ask that you have access to the unit so that we can complete troubleshooting with you and gather necessary unit information.
We are sorry to hear about your experience when using this Pressure Washer. It sounds like you will need to contact us directly some further information would be required to be better assist. Please allow our team to gather some further details so that we can help find a resolution for you. We kindly ask that you give us a call at 1-888-909-6757 (1-888-90WORKS) or start a live chat on www.greenworkstools.com. All we ask that you have access to the unit so that we can complete troubleshooting with you and gather necessary unit information.
Written by a customer while visiting greenworkstools.com
Customer Rating
5
The Mighty Mini Pressure Washer
on July 5, 2024
Posted by: Pauliemorpheus
from Oregon
Gender:Male
[This review was collected as part of a promotion.] I’ve owned three pressure washers in my life and this by far is the best value for the money and size. I’ve got a log house, in Oregon that needs constant cleaning along with several all-terrain vehicles that need heavy-duty cleaning. This little unit is ideal for the big jobs.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com