Thank you for sharing your experience with us. We apologize for the concerns that you are experiencing with your Dishwasher and would like the opportunity to see if we can help. 1. Use Rinse Aid: Rinse aid is essential for optimal drying and hard water deposit control. It allows water to drain, preventing spots/streaks. The dispenser holds 5 oz (150 mL), typically lasting 1-3 months. Check indicator while door is open (clear means empty). Note: Plastic and nonstick items may require towel drying. [FAQ on Rinse Aid]
2. Adjust Rinse Aid Level: Factory settings suit most, but use a higher setting for hard water or spotting. Turn the arrow adjuster (with fingers or a flat-blade screwdriver). Higher numbers dispense more. Change in small increments, running a few cycles before re-adjusting, as less is often more effective. [How to Determine Rinse Aid Level]
3. Select Door Open Dry (if available): This Natural Dry feature automatically opens the door post-wash to vent moisture, accelerating drying. Press the option button on the console to enable it for any cycle. ["Door Open Dry" Info]
4. Load Dishes Correctly: Angle all flat or concave items to prevent water pooling. Load glasses between, not over, tines. Rinse aid helps water sheet off. Note: Due to shape and heat properties, plastic is difficult to dry. If possible, use the third-level rack for plastics; never use the lower rack.
5. Check Water Temperature: Connect to a hot water supply. For best results, the supply line should deliver a minimum of 120°F (49°C) water to the dishwasher.
6. Use a Heated/Dry Cycle: Ensure a heated dry option is selected. Common options are: Air Dry (default/no light), Heat/Pro Dry (standard default, good results), or Extended Dry (adds 15 minutes, for large loads/better results). Some models have "Open Dry" to vent moisture. Consult your User's Manual.
7. Check Heating Element:
With Sanitize Option: Run Sanitize. If the LED is steady, the element works; proper loading and rinse aid are key. If the LED is blinking, schedule service.
Without Sanitize Option: Run a 1-hour wash with "Heat Dry." Total cycle time should be ~1.5 hours. If dishes are not warm afterward, service may be needed. Modern dishwashers are energy-efficient; focus on proper loading and rinse aid.
If you need additional assistance, please reach out to us directly via Private Message on Facebook at https://www.facebook.com/maytag or Direct Message on Instagram at https://www.instagram.com/maytag/. When responding, please include your contact information, Dryer model/serial number, and reference Case # 890302
Let’s see what we can do for you!
Christy T