Hello, Ryan123! Thank you for your feedback! We sincerely apologize for your experience with your Frigidaire 30" Single Electric Wall Oven. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed by accessing the UPO (User Programmable Offset). Before making a temperature adjustment, make sure both the oven mode and oven temperature control knobs are in the OFF position. When the oven is idle, press and hold both the light icon and the clock icon at the same time for a few seconds until the display sounds an acceptance chime. AUd should appear in the display. Press the + key in the upper part of the display until UPO appears and the default setting of 0° (or the last offset temperature) is showing. until the desired temperature change (offset) is reached. The display will change ± 5° with each key press to a maximum of + 35° or a minimum of – 35°F. If a lower temperature offset is desired, press the – key in the bottom of the display until the desired lower temperature appears. Release the key and the control will accept the change. To return the display to normal, press and hold both the oven light icon and the clock icon at the same time until an acceptance chime sounds. The display will return to show the time of day. Hopefully, this helps. Should you need further assistance, please contact us directly at 800-374-4432 M-F, 8:30 am- 8:00 pm. ~Briana