Customer Reviews for DYMO - Organizer Express Pro Industrial Portable Handheld Label Maker, Up to 0.38"W Label Size - Black/White
Customer Rating
1
Terribly made product
on March 24, 2024
Posted by: nealsk
from New York, NY
Everything was working "fine" (some minor hiccups) until recently where the wheel no longer spins. Even taking it apart to follow some helpful youtube instructions I realized that the plastic wheel is made in such a way where it will always get stuck. COMPLETE WASTE OF MONEY!
No, I would not recommend this to a friend.
Response from Dymo.comBy DYMO NA, March 27, 2024
Hello.
We sincerely apologize for the inconvenience that this has caused.
We appreciate you providing us with feedback. We recommend correctly aligning the character wheel to fix this.
Remove the tape from the device, hold the top wheel, and rotate the lower wheel until the wide plastic block on the bottom wheel and the center of the cutter in the top wheel are in line. When the wheels are in alignment, you will hear a clicking sound.
If you have any more questions, please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
I own two. One doesn't advance the other only embosses select characters. Average life not even one roll of tape. Now stuck with ten rolls of pressure tape because of planned big job. Organizer Express isn't listed on the Resources & Guides page. Oh well
Response from Dymo.comBy DYMO NA, January 29, 2024
Hi David.
We sincerely apologize for the inconvenience caused by our product and for letting you down.
To resolve this issue, it is likely that the character wheel alignment needs to be adjusted. Please follow the steps below to align the wheels:
1. Remove any tape currently inserted into the device. 2. Hold the top wheel of the device and turn the bottom wheel until the center of the cutter in the top aligns with the wide plastic block on the bottom wheel. You should hear a clicking sound when the wheels are aligned correctly.
Please note that in Resources and Guides the Organizer Express is listed as Omega.
If you are still having issues (If you have more questions or feedback), please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
We bought this to label mailboxes at our condo complex. The numbers are so small you can hardly make out what they are. There is no way to change the size?
No, I would not recommend this to a friend.
Response from Dymo.comBy DYMO NA, January 15, 2024
Hello. Thank you for contacting us.
We sincerely apologize for the inconvenience caused. Thank you for sharing your feedback with us, and please be aware that this information will be forwarded to the appropriate department for further review.
Please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
I got about three tapes worth of labels out of this before the cutter went out (Yes, I checked the alignment).
Response from Dymo.comBy DYMO NA, January 15, 2024
Hi Chris.
We sincerely apologize for this inconvenience and for letting you down. Kindly reach out to us directly so that we can help rectify this issue for you.
Please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
Cheap piece of junk. Only lasts a few uses. This is my second one and I still haven't gotten through a single tape cartridge. These things jam up, refuse to create letters or cut the tape. Screws too tight (glued in?) to remove/repair. DO BETTER!
Response from Dymo.comBy DYMO NA, October 27, 2023
Hello.
We sincerely apologize for the inconvenience caused.
If you are experiencing issues with embossing or cutting, it may be due to the character wheel alignment.
To resolve these issues, it is likely that the character wheel alignment needs to be adjusted. Please follow the steps below to align the wheels:
1. Remove any tape currently inserted into the device. 2. Hold the top wheel of the device and turn the bottom wheel until the center of the cutter in the top aligns with the wide plastic block on the bottom wheel. You should hear a clicking sound when the wheels are aligned correctly.
If you are still having issues (If you have more questions or feedback), please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
I love this thing. It is tiny, practical, and it works very well. I organized my entire pantry. I came here because I was having trouble with it after I changed the tape, and found a very simple solution: to align both wheels. I realized that most reviews are complaints from people who wrote their reviews before looking for solutions. And so I wanted to say that I love this thing.
After little use the embossing has stopped working. Judging by other reviews it is surprising this tool is still being sold. Very disappointing because when it worked, the labels were fine.
No, I would not recommend this to a friend.
Response from Dymo.comBy Bianca, DYMO, July 26, 2023
Hello.
We sincerely apologize for the inconvenience that this has caused. We appreciate you providing us with feedback. We recommend correctly aligning the character wheel to fix this. Remove the tape from the device, hold the top wheel, and rotate the lower wheel until the wide plastic block on the bottom wheel and the center of the cutter in the top wheel are in line. When the wheels are in alignment, you will hear a clicking sound.
If you have any more questions, please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.