RalphHenry's stats
- Review count283
- Helpfulness votes448
- First reviewMay 28, 2015
- Last reviewJune 18, 2024
- Featured reviews0
- Average rating4.9
- Review comment count24
- Helpfulness votes28
- First review commentMay 28, 2015
- Last review commentJune 30, 2017
- Featured review comments0
Questions
- Question count0
- Helpfulness votes0
- First questionNone
- Last questionNone
- Featured questions0
- Answer count61
- Helpfulness votes164
- First answerJune 30, 2015
- Last answerNovember 3, 2021
- Featured answers0
- Best answers10
Capture your adventures with this Rexing dash cam. It has dual Full HD cameras and 170-degree wide-angle lenses to record high-quality footage of the road and inside the car. This Rexing dash cam has secure recording technology to ensure footage is locked if you're in a collision.
Customer Rating
5
Two Cameras Plus Audio - Perfect
on December 28, 2018
Posted by: RalphHenry
from Youngsville, NC
This is a very advanced dashcam especially at this price point. You have a forward facing and rear facing camera in one unit which is very nice and eliminates the need to run wiring from the front of the vehicle to the rear. The camera does allow for a long list of settings but using the defaults was fine for me. I found the unit to be very well made and functionally does incorporate all the features needed. If you want GPS logging you do need to buy a separate unit which then plugs into a port on the main body. This is a better design I think because many people would want the dual camera feature but at a lower price point. If you want the GPS as I do, you can purchase the additional accessory which is at a very reasonable price.
I was able to put the device through about 400 miles of testing so far and it is super. The videos were very sharp but I did use a higher resolution which I do think is important. You can also take photos with this dashcam as well.
It has nice 5MP sensors and the 1920x1080 resolution works perfectly – you can easily read road signs etc. on playback, it also shows your mph speed. You get two videos labeled A and B for each time segment – one is the rear-facing and one is the front-facing camera. Any A/V player on a PC or on your phone will work. I did download the free Rexing GPS player that shows your front/rear videos and alongside those videos you see a Google map of the location that moves right along in sync with the video – how cool is that; you can download the GPS player here:
https://www.rexingusa.com/support/product-support/v2/
I used a 32GB SD card but the unit will support up to a 128GB micro SD card. The 32GB card handled about 4 hours of recordings for me at the highest resolution. I did set my video clips to 3 minutes, you can vary this based on your preference. If you are new to dashcams, they typically record in a series of clips and will overlap an older clip if the SD card space runs out. This is smart so that you have the latest videos. However, if the unit senses a collision which is an important feature it has, then it will mark a clip so that it is locked and can’t be overwritten.
There is a phone app called TimaCam, and once installed you can connect this wirelessly to the dashcam and set parameters and watch videos. It might be a little easier to use the app to alter settings but I preferred using the buttons on the dashcam itself. You do need to read the manual, it’s simple but the meaning of the symbols is important to understand.
The package includes two mounting options, adhesive pad or suction cup mount. I recommend the adhesive pad so it can’t fall off the windshield if the suction cup eventually gives way. Also the unit can be removed from the part that stays on the windshield if needed, so I think the adhesive pad is best.
I found this tidbit useful to me. I noticed Rexing has products that are using supercapacitors, although not in this dashcam. Supercapacitors are relatively new and have some advantages over rechargeable batteries. The fact Rexing is involved already with supercapacitors tells me they are a very forward-thinking company and that’s great.
I did have a question and sent an email to Rexing support the day before Christmas and got an answer right away – so I give Rexing support high marks. Also the website is very professional and useful for getting stuff like new firmware or even info from a blog. I did load the newest firmware and it is easy to do, just load the firmware .bin-file to a clean SD card and plug it into the unit and turn on – automagically it puts the new firmware on. You do need to delete this .bin-file from the SD card or just reformat the card before you want to use it to record more videos.
You can extend the warranty from 12 months to 18 months just by registering the device, so you do need to do that. I highly recommend this unit and love its functionality, and I must say it looks very sharp in my truck as well.
I was able to put the device through about 400 miles of testing so far and it is super. The videos were very sharp but I did use a higher resolution which I do think is important. You can also take photos with this dashcam as well.
It has nice 5MP sensors and the 1920x1080 resolution works perfectly – you can easily read road signs etc. on playback, it also shows your mph speed. You get two videos labeled A and B for each time segment – one is the rear-facing and one is the front-facing camera. Any A/V player on a PC or on your phone will work. I did download the free Rexing GPS player that shows your front/rear videos and alongside those videos you see a Google map of the location that moves right along in sync with the video – how cool is that; you can download the GPS player here:
https://www.rexingusa.com/support/product-support/v2/
I used a 32GB SD card but the unit will support up to a 128GB micro SD card. The 32GB card handled about 4 hours of recordings for me at the highest resolution. I did set my video clips to 3 minutes, you can vary this based on your preference. If you are new to dashcams, they typically record in a series of clips and will overlap an older clip if the SD card space runs out. This is smart so that you have the latest videos. However, if the unit senses a collision which is an important feature it has, then it will mark a clip so that it is locked and can’t be overwritten.
There is a phone app called TimaCam, and once installed you can connect this wirelessly to the dashcam and set parameters and watch videos. It might be a little easier to use the app to alter settings but I preferred using the buttons on the dashcam itself. You do need to read the manual, it’s simple but the meaning of the symbols is important to understand.
The package includes two mounting options, adhesive pad or suction cup mount. I recommend the adhesive pad so it can’t fall off the windshield if the suction cup eventually gives way. Also the unit can be removed from the part that stays on the windshield if needed, so I think the adhesive pad is best.
I found this tidbit useful to me. I noticed Rexing has products that are using supercapacitors, although not in this dashcam. Supercapacitors are relatively new and have some advantages over rechargeable batteries. The fact Rexing is involved already with supercapacitors tells me they are a very forward-thinking company and that’s great.
I did have a question and sent an email to Rexing support the day before Christmas and got an answer right away – so I give Rexing support high marks. Also the website is very professional and useful for getting stuff like new firmware or even info from a blog. I did load the newest firmware and it is easy to do, just load the firmware .bin-file to a clean SD card and plug it into the unit and turn on – automagically it puts the new firmware on. You do need to delete this .bin-file from the SD card or just reformat the card before you want to use it to record more videos.
You can extend the warranty from 12 months to 18 months just by registering the device, so you do need to do that. I highly recommend this unit and love its functionality, and I must say it looks very sharp in my truck as well.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+2points
2of 2voted this as helpful.
Make bookkeeping tasks stress-free with this Epson WorkForce Accounting edition scanner. It exports extracted business data to QuickBooks Online or Excel to aid in financial reporting, and Nuance OCR converts documents to searchable formats for efficient file management. This Epson WorkForce Accounting edition scanner’s LCD display provides information on the wireless connection status and battery level.
Customer Rating
5
Small and Mighty Scanner
on December 23, 2018
Posted by: RalphHenry
from Youngsville, NC
This product is outstanding. I can highly recommend it. It is solid and well designed functionally. I do have some admittedly older multi-function printers and they perform scanning functions very well. But this device is super-fast; meaning only a few seconds to scan a page from initiation of the scan request to when the copy is available in your device.
You can scan to a computer or from your cell phone. Either method has software that is flawless and intuitive. Use the Epson ‘ScanSmart’ Software on a PC or download the Epson ‘DocumentScan’ app for your phone. When you initiate a scan on the device while connected to a PC, the software will pop open and you easily complete your scan. On a phone just open the software and connect wirelessly to the scanner and you scan can be done in a few seconds. There are no glitches I could find. I particularly like using the phone and sending the PDF to my email or gmail account and I’m done. I do use this scanner a lot to submit online medical forms that come to me hardcopy. With this tiny portable device I have saved a lot of time since wherever I am in the house I can scan the document in using my phone, and not worry about losing the receipt on my kitchen table which is a mess I admit. Later when I get to any of my computers I can look it over and upload it to the medical site for re-imbursement. No chance for me to lose the hardcopy document which sometimes I do – this device has eliminated my human error that others may not have.
You can save the scan into Word, Powerpoint, etc. or even attach it to an email all under the free Epson ‘ScanSmart’ software. I use the Mozilla Thunderbird email client and the Epson software magically opened my email client and created a new email with the pdf from the scan attached – how cool is that. You can also elect to save to Dropbox or Evernote etc. You may have to download a plug-in to make some functions work; however the software just asks you if you want to download the plug-in and takes over and does everything, so it is easy. It is a single-sheet feed device so you may want to use your mulit-function printer for doing scans of many-page documents.
Small business users will want to take advantage of the Epson ScanSmart Accounting Edition Software, with receipt management functionality. This allows you functions like exporting receipts to Quickbooks for example and many other advanced accounting document management tools. Take a look at the user’s guide here: https://files.support.epson.com/docid/cpd5/cpd55726.pdf to see the complete list of abilities - very nice.
It is so small you can take it with you on business trips and vacations and you can’t do that with a full size scanner or multi-function printer. All operations of the software on the phone or on the PC worked everytime, no confusion or fuzzy areas. This is a very nice product and it is professional. I love it. I think it is one of those must-have products for a home or business environment.
You can scan to a computer or from your cell phone. Either method has software that is flawless and intuitive. Use the Epson ‘ScanSmart’ Software on a PC or download the Epson ‘DocumentScan’ app for your phone. When you initiate a scan on the device while connected to a PC, the software will pop open and you easily complete your scan. On a phone just open the software and connect wirelessly to the scanner and you scan can be done in a few seconds. There are no glitches I could find. I particularly like using the phone and sending the PDF to my email or gmail account and I’m done. I do use this scanner a lot to submit online medical forms that come to me hardcopy. With this tiny portable device I have saved a lot of time since wherever I am in the house I can scan the document in using my phone, and not worry about losing the receipt on my kitchen table which is a mess I admit. Later when I get to any of my computers I can look it over and upload it to the medical site for re-imbursement. No chance for me to lose the hardcopy document which sometimes I do – this device has eliminated my human error that others may not have.
You can save the scan into Word, Powerpoint, etc. or even attach it to an email all under the free Epson ‘ScanSmart’ software. I use the Mozilla Thunderbird email client and the Epson software magically opened my email client and created a new email with the pdf from the scan attached – how cool is that. You can also elect to save to Dropbox or Evernote etc. You may have to download a plug-in to make some functions work; however the software just asks you if you want to download the plug-in and takes over and does everything, so it is easy. It is a single-sheet feed device so you may want to use your mulit-function printer for doing scans of many-page documents.
Small business users will want to take advantage of the Epson ScanSmart Accounting Edition Software, with receipt management functionality. This allows you functions like exporting receipts to Quickbooks for example and many other advanced accounting document management tools. Take a look at the user’s guide here: https://files.support.epson.com/docid/cpd5/cpd55726.pdf to see the complete list of abilities - very nice.
It is so small you can take it with you on business trips and vacations and you can’t do that with a full size scanner or multi-function printer. All operations of the software on the phone or on the PC worked everytime, no confusion or fuzzy areas. This is a very nice product and it is professional. I love it. I think it is one of those must-have products for a home or business environment.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Prepare shakes and complete blending tasks with this Ninja smart screen kitchen system. It uses FreshVac technology to preserve the vitamins, flavors and appearance of natural ingredients, and with 1400 watts of power the stacked blades help the processor puree and chop with maximum precision. The touch screen display of this Ninja smart screen kitchen system offers easy access to various functions.
Customer Rating
5
Powerful, Smart, Unique
on November 30, 2018
Posted by: RalphHenry
from Youngsville, NC
This is a very powerful blender. Right away I liked the rubber suction feet that ensure it stays in place nicely. This version comes with both the ability to make smoothies and all the functions of a normal blender plus the kitchen chopper/dough mixer and its blades. A smaller pitcher/mug is included and this is very handy for making a small batch. It mounts on the mixer with its own blade - you can remove the blade and use the included screw-on lid to take this mug with you as it fits in the cup holder in your car. The mixer customizes its blending based on what attachment you use: 72 oz. pitcher, small mug, or kitchen processor/chopper. A small icon of the attached container pops up on the touchscreen.
This blender has a capability that I had not seen before. You can place a small cordless pump called the Freshvac on top of the blender to remove air from your concoction. You don't need to screw it in, just set the Freshvac on top in its designated place atop of a vacuum seal. You can blend the contents a little before you vacuum but if you have filled the pitcher really high you may notice the juices may rise close to the top as you vacuum so I do the vacuum work before I do the blending just as the directions say to do. Note that all you need to do is press a green button on the side of the Freshvac pump and then it releases its pressure and you can then lift it off. Before you serve your smoothie, you also need to pull up on a small flap on top of the pitcher to release the pressure inside. The resulting smoothie does taste better as now it is all smoothie and no air bubbles - so the taste is more intense.
The chopper also works top notch, and is so smooth. The cutting disk is reversible for slicing or shredding. Cleaning is a breeze; I put some water and a very little amount of dish-washing liquid into any of the accessories and let the blender clean it.
You will love the quick start guide, and a complete user guide is included for more details. You also get a very nice recipe booklet. Note there are several built in programs, so take advantage of these. They are accessible via a very solid and well-constructed touch screen. The blender will change speeds and stop as needed to ensure the optimal mixing. These pre-sets were nicer than you might at first think, because for example - you can go make some toast and don't have to stop the blender and rearrange contents etc., in order to get things mixed properly. You just come back and the blender has everything mixed perfectly.
All the parts are very sturdy and Ninja has designed the blades correctly for optimal mixing - well done. I do highly recommend this blender/food-processor.
This blender has a capability that I had not seen before. You can place a small cordless pump called the Freshvac on top of the blender to remove air from your concoction. You don't need to screw it in, just set the Freshvac on top in its designated place atop of a vacuum seal. You can blend the contents a little before you vacuum but if you have filled the pitcher really high you may notice the juices may rise close to the top as you vacuum so I do the vacuum work before I do the blending just as the directions say to do. Note that all you need to do is press a green button on the side of the Freshvac pump and then it releases its pressure and you can then lift it off. Before you serve your smoothie, you also need to pull up on a small flap on top of the pitcher to release the pressure inside. The resulting smoothie does taste better as now it is all smoothie and no air bubbles - so the taste is more intense.
The chopper also works top notch, and is so smooth. The cutting disk is reversible for slicing or shredding. Cleaning is a breeze; I put some water and a very little amount of dish-washing liquid into any of the accessories and let the blender clean it.
You will love the quick start guide, and a complete user guide is included for more details. You also get a very nice recipe booklet. Note there are several built in programs, so take advantage of these. They are accessible via a very solid and well-constructed touch screen. The blender will change speeds and stop as needed to ensure the optimal mixing. These pre-sets were nicer than you might at first think, because for example - you can go make some toast and don't have to stop the blender and rearrange contents etc., in order to get things mixed properly. You just come back and the blender has everything mixed perfectly.
All the parts are very sturdy and Ninja has designed the blades correctly for optimal mixing - well done. I do highly recommend this blender/food-processor.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Ditch the headphone cable with these Insignia Bluetooth wireless earbuds. With up to five hours of use per charge and an included charging case for mid-day boosts, these earbuds are ideal for daily use. These Insignia Bluetooth wireless earbuds feature a built-in microphone for hands-free calling and easy voice commands.
Customer Rating
2
Earbud to Earbud Connectivity Weak
on November 28, 2018
Posted by: RalphHenry
from Youngsville, NC
The sound is average at best from these ear buds. I have tried over a dozen earbuds and these are the weakest in terms of bass. I also found the charging process was finicky. The left earbud never did turn off the red LED to show it was fully charged, even if left overnight- tried it three nights. I made sure that the contacts on each bud were connected/seated in the nice charging case.
The right earbud paired easily to my android phone. The left earbud is supposed to then pair with the right earbud when you hit its power on button but there is a design problem here (I feel). At least with the earbud set I had, the left earbud needed to be within about 8 inches of the right earbud or it did not connect. If you put the right earbud in your ear to hear music and ensure it really is paired with your phone, the natural tendency is to hold the left earbud in your hands so you can see it blink when you hit its power button. However, you are too far from the right earbud so nothing happens – no lights and it does not wake up. When I hold it near my head close enough to the right bud, it might connect or might not connect based on if it turned on or if I accidently turned it off trying to figure why there were no lights . Also once I do get both working, if I pull the right or left bud out an inch or an inch and a half, the left bud stops. It took me a while to figure all this out and that was frustrating. It may be my left earbud is defective, that may explain why this connectivity is so weak. The right and left touchpads on the buds worked fine for functions to pause/play and for cell phone call functions.
The earbuds were very comfortable and easy to put on and in your ears. The price is about the same compared to other brands that work better; so I can’t recommend these primarily due to the usability problem I mentioned
The right earbud paired easily to my android phone. The left earbud is supposed to then pair with the right earbud when you hit its power on button but there is a design problem here (I feel). At least with the earbud set I had, the left earbud needed to be within about 8 inches of the right earbud or it did not connect. If you put the right earbud in your ear to hear music and ensure it really is paired with your phone, the natural tendency is to hold the left earbud in your hands so you can see it blink when you hit its power button. However, you are too far from the right earbud so nothing happens – no lights and it does not wake up. When I hold it near my head close enough to the right bud, it might connect or might not connect based on if it turned on or if I accidently turned it off trying to figure why there were no lights . Also once I do get both working, if I pull the right or left bud out an inch or an inch and a half, the left bud stops. It took me a while to figure all this out and that was frustrating. It may be my left earbud is defective, that may explain why this connectivity is so weak. The right and left touchpads on the buds worked fine for functions to pause/play and for cell phone call functions.
The earbuds were very comfortable and easy to put on and in your ears. The price is about the same compared to other brands that work better; so I can’t recommend these primarily due to the usability problem I mentioned
Mobile Submission: False
No, I would not recommend this to a friend.
Share this review:
+2points
2of 2voted this as helpful.
Listen to your TV or music wirelessly without disturbing others.
Customer Rating
5
Great for Wireless Connection Without Bluetooth
on November 28, 2018
Posted by: RalphHenry
from Youngsville, NC
These headphones are excellent for comfort and sound. They are not Bluetooth connectible but they are indeed wireless. Many people need the capability these headphones provide because their audio source does not have Bluetooth. If you have a boombox or TV or other playback device that has a headphone jack or even RCA output connectors, this is the product you are looking for – and is not easy to find anymore.
Turns out my wife’s old boombox that she plays books on was the perfect target to test these headphones. The earpads go over the ear and are nicely sized to go over your complete ear. They are super comfortable. The sound is great and so I lost these headphones immediately to her which is fine. The base unit is upstairs but she went all over the house (first floor, second floor and basement) and did not lose connectivity. I also have used this type of wireless connectivity in an RV, where the built-in stereo and TV units sometimes don’t have Bluetooth and this type of wireless connectivity is very convenient; and allows one person to listen to music without disturbing others so they can read a book etc.
The product comes with the headphones, a base charging/wireless-sending unit, AC adapter, and cables to connect the sending unit to a either a 3.5mm jack or to RCA plugs. You can place the sending/charging unit near your audio source and connect it to power and to the source. The headphones sit in a charging area on top of the sending unit. The headphones can then be worn anywhere and the sending unit sends the signal to them.
I was very impressed with the price and quality of these wireless headphones. I do recommend them if you need to connect a source wirelessly but the source does not have Bluetooth.
Turns out my wife’s old boombox that she plays books on was the perfect target to test these headphones. The earpads go over the ear and are nicely sized to go over your complete ear. They are super comfortable. The sound is great and so I lost these headphones immediately to her which is fine. The base unit is upstairs but she went all over the house (first floor, second floor and basement) and did not lose connectivity. I also have used this type of wireless connectivity in an RV, where the built-in stereo and TV units sometimes don’t have Bluetooth and this type of wireless connectivity is very convenient; and allows one person to listen to music without disturbing others so they can read a book etc.
The product comes with the headphones, a base charging/wireless-sending unit, AC adapter, and cables to connect the sending unit to a either a 3.5mm jack or to RCA plugs. You can place the sending/charging unit near your audio source and connect it to power and to the source. The headphones sit in a charging area on top of the sending unit. The headphones can then be worn anywhere and the sending unit sends the signal to them.
I was very impressed with the price and quality of these wireless headphones. I do recommend them if you need to connect a source wirelessly but the source does not have Bluetooth.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+1point
1of 1voted this as helpful.
Whip up a smoothies, dips or side dishes with this Ninja blender. The FreshVac pump reduces oxygen to preserve flavor and nutrients, and the 20-oz. cup or 72-oz. pitcher makes it easy to create single or multiple servings. This powerful Ninja blender has crushing blades that power through ice cubes effortlessly.
Customer Rating
5
Powerful and Vacuum Feature Improves Taste
on November 24, 2018
Posted by: RalphHenry
from Youngsville, NC
This is a very powerful blender. It had no trouble with crushing ice or making a smoothie. The design is really simple and intuitive and that’s what I prefer for a kitchen appliance – you don’t really have to go to the manual to understand how to use it. The accessories were very useful and I found this blender handled all it’s functions really well. The key feature is the FreshVac pump. When you are making a smoothie, I found it best to first blend up all your pieces such as apple, banana, frozen berries and frozen peaches (which is a favorite of mine). Now you sit the pump in its spot on top of the blender. You do not twist it, just set it in place and hit the button on top. It is smart in that once it removes the air and creates a vacuum inside the pitcher, it stops itself. Now you can hit smoothie and it will run a program of blending till it is done. You can also hit Puree or Plulse as you see fit. Now you remove the pump by first pressing a button on the side of the pump and then lift it away. You can release the pressure inside the pitcher by lifting a small seal/flap that the pump had sat on top of. Now pour your smoothie. I had my wife test a version of the same smoothie without using the vacuum and with using the vacuum pump and she did say the smoothie that had the air removed was much better – same as my taste test results – so removing tha air does improve your smoothie taste as we found. You do need 4 AA batteries for the pump.
In addition to the full size pitcher, the blender came with a ‘single serve’ Freshvac cup. You can use this right on the blender in place of the full size pitcher. You blend in it and then can pump the air from this special design ‘single serve’ cup. It turns out that this is a very nice accessory since many times you only want to make a single cup or so of your smoothie.
The product comes with a complete user guide and also a very nice quick-start guide. It also comes with a great recipe booklet that includes recipes that have everything from kale, spinach, flaxseed and of course all kinds of fruit and more.
I highly recommend this device and it now has a nice spot on our counter.
In addition to the full size pitcher, the blender came with a ‘single serve’ Freshvac cup. You can use this right on the blender in place of the full size pitcher. You blend in it and then can pump the air from this special design ‘single serve’ cup. It turns out that this is a very nice accessory since many times you only want to make a single cup or so of your smoothie.
The product comes with a complete user guide and also a very nice quick-start guide. It also comes with a great recipe booklet that includes recipes that have everything from kale, spinach, flaxseed and of course all kinds of fruit and more.
I highly recommend this device and it now has a nice spot on our counter.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Velop is a flexible Whole Home Mesh Wi-Fi system of modular nodes that work together to provide a flawless signal for any home. Now with new plug-in nodes that fit all wall sockets, you'll be assured coverage in traditionally underused areas, and the sleek design only uses a single outlet. Velop works with any Internet Service Provider (ISP), making customization simple, and with Tri-Band performance and Intelligent Mesh™ technology, you'll always be on the fast path to the Internet.
Customer Rating
5
Simple to Install and Use, But Powerful
on November 16, 2018
Posted by: RalphHenry
from Youngsville, NC
You might be intimidated installing a mesh network in your home. If you are using this Linksys Velop system, it is so easy you won’t believe it. I know why it is easy and that is because the firmware and app are written really well and handle the underlying complexities which is what I don’t see all the time. Kudos to Linksys. By the way, Linksys support is wonderful as I have used it in the past and their website is top notch. I didn’t need any support this time to quickly install this three node system using their phone app. Basically you’re told to unhook your old router and then install the main node. A single light changes colors and modes (blinking or solid), to tell you when to hit ‘next’ on your smartphone. I encountered absolutely no hiccups during the installation. My main node is upstairs and I installed a node on the first floor and in the basement. Something I found very nice was that you install one SSID and it doesn’t matter if a device is 5 GHz or 2.4 Ghz, the system figures all that out. When you are done you can use the app for all kinds of info including what devices are connected wireless or even via ethernet directly if you use the extra port on the main unit to connect a PC or whatever, which I did. It will also tell you which of the three nodes a particular device is using. Why is this so easy, the programmers at Linksys did the work for you. I am an engineer/programmer so I can appreciate what they did to make this so simplified. The app also will test the position you put your nodes in and tell you if it is a good spot – also a nice touch.
Once your mesh system is in, you will need to reconnect your devices; even if you use the same SSID and password as you had before; and this is normal. I used the same SSID and password anyway so I didn’t have to update any of my own documentation. It was a snap to reconnect all my devices which includes 6 PC’s, a Nest doorbell, a Chamberlain MyQ garage door opener, an Arlo hub, a Philips Hue hub, a Smarthings hub, a Netgear WNCE2001 WiFi adapter and 4 printers. I have a 4 port switch connected to the WiFi adapter for some devices in the basement that don’t have wireless connectivity. I list these in case you have these or similar devices and I can say they all connected back up no problem whatsoever.
The good thing about the WiFi adapter is once I gave it the new address I could connect the SmartThings, Arlo and Philips hubs to the new mesh system without any configuration changes to these hubs.
The last thing I did was to use speedtest.net to check the download/upload speeds. I do have a 400 Mbps line from Spectrum. Usually my PC’s connected wirelessly with speeds from 20 Mbps to 210 Mbps depending on where in the house the device was and the wireless hardware in a particular device. I tried to get a good comparison by using the same time and day before and after the Linksys Velop system was put in. I also compared speeds using the same servers. It gives a ballpark picture. The news was great. The Velop system doubled the speeds in some cases and was about 10% faster in other cases. One thing I saw was that an Acer laptop that had speeds of about 210 Mbps before, now got 345 MBps during several test runs. I had never seen a wireless device get over 300 MBps in my house so this to me was a sign the mesh network was a big improvement. The Acer laptop does sit only a room away from the main node, but it got almost 50% improvement on an already fast connection.
Here’s a few things that I found interesting; The Velop system displays one Wi-Fi name for the entire tri-band network which I prefer since I let the smarts of the system manage this – I can always use the app to see details. However, with the latest firmware version, you can now use the Velop web interface to give the 2.4 GHz and 5 GHz bands different Wi-Fi names – I didn’t try this though. Another fact is Linksys validated you can use up to 6 nodes – mighty big house though. If all your Linksys Velop nodes are the type that have ethernet ports, you can also hardwire the nodes together for example if you have ethernet cables already throughout your house. For the Velop system I have and reviewed, the main node had 2 ethernet ports and the other nodes you just plug into a wall outlet – simpler and a little less cost. Here’s a good link if you want more research: https://www.linksys.com/us/support-article?articleNum=217439#H9
I definitely recommend this system. Don’t worry about complexity, the smarts in this system make it easy. Also you will get much better connectivity in places like a basement (like I have) and into the garage and out on the porch as well. Every type of device I tried worked with the Velop mesh network and worked better. Great system with great technology.
Once your mesh system is in, you will need to reconnect your devices; even if you use the same SSID and password as you had before; and this is normal. I used the same SSID and password anyway so I didn’t have to update any of my own documentation. It was a snap to reconnect all my devices which includes 6 PC’s, a Nest doorbell, a Chamberlain MyQ garage door opener, an Arlo hub, a Philips Hue hub, a Smarthings hub, a Netgear WNCE2001 WiFi adapter and 4 printers. I have a 4 port switch connected to the WiFi adapter for some devices in the basement that don’t have wireless connectivity. I list these in case you have these or similar devices and I can say they all connected back up no problem whatsoever.
The good thing about the WiFi adapter is once I gave it the new address I could connect the SmartThings, Arlo and Philips hubs to the new mesh system without any configuration changes to these hubs.
The last thing I did was to use speedtest.net to check the download/upload speeds. I do have a 400 Mbps line from Spectrum. Usually my PC’s connected wirelessly with speeds from 20 Mbps to 210 Mbps depending on where in the house the device was and the wireless hardware in a particular device. I tried to get a good comparison by using the same time and day before and after the Linksys Velop system was put in. I also compared speeds using the same servers. It gives a ballpark picture. The news was great. The Velop system doubled the speeds in some cases and was about 10% faster in other cases. One thing I saw was that an Acer laptop that had speeds of about 210 Mbps before, now got 345 MBps during several test runs. I had never seen a wireless device get over 300 MBps in my house so this to me was a sign the mesh network was a big improvement. The Acer laptop does sit only a room away from the main node, but it got almost 50% improvement on an already fast connection.
Here’s a few things that I found interesting; The Velop system displays one Wi-Fi name for the entire tri-band network which I prefer since I let the smarts of the system manage this – I can always use the app to see details. However, with the latest firmware version, you can now use the Velop web interface to give the 2.4 GHz and 5 GHz bands different Wi-Fi names – I didn’t try this though. Another fact is Linksys validated you can use up to 6 nodes – mighty big house though. If all your Linksys Velop nodes are the type that have ethernet ports, you can also hardwire the nodes together for example if you have ethernet cables already throughout your house. For the Velop system I have and reviewed, the main node had 2 ethernet ports and the other nodes you just plug into a wall outlet – simpler and a little less cost. Here’s a good link if you want more research: https://www.linksys.com/us/support-article?articleNum=217439#H9
I definitely recommend this system. Don’t worry about complexity, the smarts in this system make it easy. Also you will get much better connectivity in places like a basement (like I have) and into the garage and out on the porch as well. Every type of device I tried worked with the Velop mesh network and worked better. Great system with great technology.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
1of 2voted this as helpful.
Enjoy your favorite music alone or among friends with these wireless Rowkin Ascent earbuds. The Rowkin app is compatible with iOS and Android to let you share music or adjust audio settings, while WaterSafe technology provides water resistance for use during inclement weather. These Rowkin Ascent earbuds come with a slim charging case, which is also ideal for storage.
Customer Rating
5
Nice Bass and Solid Buds and Case
on November 8, 2018
Posted by: RalphHenry
from Youngsville, NC
These cordless ear buds have the best sound of any I have used. I do recommend you download the Rowkin app to your phone and you can tailor the sound to your liking; I liked the extra bass setting best. The app can also locate your ear buds so if you lose them jogging or in the house it will show you the location.
This model of Rowkin buds has a new ribbed design that ensures the ear buds stay put while jogging and they did work great. I do recommend as you put them in your ear to slightly twist them gently back and forth once to ensure they are seated. They did not hurt my ears during 30 minutes of jogging. I also had them on for a movie after I paired them with my SlingAir TV box and after 90 minutes no discomfort at all. Some Rowkin buds have an option for ear hooks. I found out from Rowkin support that this model does not use the ear hooks (some call wings) to help keep the buds in while jogging. Indeed they are not needed due to the aforementioned ribbed design. I’d also mention that I sent off an email to Rowkin support to get the answer on the ear hooks and immediately got a confirmation of my submission and a half an hour later I had an answer – very nice support.
They come with a Qi wireless charging pad and a USB C cord, and a charging case. The quality is superb. You can charge the case and the earbuds at the same time (they’ll get over 3 hours per charge), and then you can use the charged-case to re-charge the buds on the fly, for over 50 more hours of listening. The charging can be done directly via the USB C (nice to have the USB C) cable or you can put the buds in the charger and use the Qi wireless pad. An adapter is included to convert one end of the USB C cable to the common USB size.
I’d recommend you print the user manual from the Rowkin website to learn about all the features, but basically these earbuds wake up and connect to each other when you remove them from the case; and will then pair to your phone very easily. A few different size rubber cups come with it so you can be sure to fit your ear properly. By the way, their website allows you to select over 100 languages to browse in.
The sound was really fantastic and I plan to use these to listen to my TV so as not to disturb others. I very highly recommend this product. The device and the support are both first rate.
This model of Rowkin buds has a new ribbed design that ensures the ear buds stay put while jogging and they did work great. I do recommend as you put them in your ear to slightly twist them gently back and forth once to ensure they are seated. They did not hurt my ears during 30 minutes of jogging. I also had them on for a movie after I paired them with my SlingAir TV box and after 90 minutes no discomfort at all. Some Rowkin buds have an option for ear hooks. I found out from Rowkin support that this model does not use the ear hooks (some call wings) to help keep the buds in while jogging. Indeed they are not needed due to the aforementioned ribbed design. I’d also mention that I sent off an email to Rowkin support to get the answer on the ear hooks and immediately got a confirmation of my submission and a half an hour later I had an answer – very nice support.
They come with a Qi wireless charging pad and a USB C cord, and a charging case. The quality is superb. You can charge the case and the earbuds at the same time (they’ll get over 3 hours per charge), and then you can use the charged-case to re-charge the buds on the fly, for over 50 more hours of listening. The charging can be done directly via the USB C (nice to have the USB C) cable or you can put the buds in the charger and use the Qi wireless pad. An adapter is included to convert one end of the USB C cable to the common USB size.
I’d recommend you print the user manual from the Rowkin website to learn about all the features, but basically these earbuds wake up and connect to each other when you remove them from the case; and will then pair to your phone very easily. A few different size rubber cups come with it so you can be sure to fit your ear properly. By the way, their website allows you to select over 100 languages to browse in.
The sound was really fantastic and I plan to use these to listen to my TV so as not to disturb others. I very highly recommend this product. The device and the support are both first rate.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
+1point
1of 1voted this as helpful.
Clean those hard-to-reach places in your home with this Shark cordless vacuum. Its bristle brush deep-cleans any carpet, and the additional soft-roll brush pulls in larger particles from wood floors while polishing them. The rechargeable, high-capacity Li-Ion battery keeps this Ninja cordless vacuum's DuoClean Technology ready for tough cleaning chores.
Customer Rating
5
Innovative Design Works Great
on November 3, 2018
Posted by: RalphHenry
from Youngsville, NC
This is by far the best cordless vacuum I have tried. It has a 28 volt power pack with about an hour of run time in normal mode and about 20 minutes in turbo mode. You can charge the battery in a separate battery charger base or you can charge the battery by plugging the power supply right into the bottom of the battery or indeed you can charge the battery while it is installed on the vacuum – nice.
It is very well designed in terms of reconfiguring the vacuum into basically 3 modes. Normal with the power head attached is for carpet or bare floors. A second mode is to lift the wand off for cleaning draperies and those cobwebs up in the corners. The third mode is the ability to remove just the handle and this gives you a short configuration to do furniture for example. In the latter two modes you can keep the canister on the machine or easily lift it away. I found it was refreshing to find the very simple ways to unhook the main parts to get into the different configurations. Also it is easy and intuitive as well to clean the dust bin and remove and clean the hepa filter.
Some nice accessories are included. There are a couple small heads for wall and furniture cleaning and you also get a very useful tapered nozzle that has a brush that can be deployed on the nozzle or retracted. I do find that with cordless vacuums you can vacuum without getting that cold sweat that occurs sometimes when you push around a heavier corded vacuum. Also the lift-away feature makes it even lighter when you need to clean up stairs for example – and no cord to pull up the steps.
The most innovative feature is actually in the power head and is why it gets the label DuoClean Technology. There is a spinning bristle brush plus a soft brush that together really do pull up the dust and dirt on carpet or bare floors – especially the finer particles so that for a wood floor it really does polish the flooring.
I do highly recommend this vacuum. It is innovative, well designed, solid and does a great job cleaning your house.
It is very well designed in terms of reconfiguring the vacuum into basically 3 modes. Normal with the power head attached is for carpet or bare floors. A second mode is to lift the wand off for cleaning draperies and those cobwebs up in the corners. The third mode is the ability to remove just the handle and this gives you a short configuration to do furniture for example. In the latter two modes you can keep the canister on the machine or easily lift it away. I found it was refreshing to find the very simple ways to unhook the main parts to get into the different configurations. Also it is easy and intuitive as well to clean the dust bin and remove and clean the hepa filter.
Some nice accessories are included. There are a couple small heads for wall and furniture cleaning and you also get a very useful tapered nozzle that has a brush that can be deployed on the nozzle or retracted. I do find that with cordless vacuums you can vacuum without getting that cold sweat that occurs sometimes when you push around a heavier corded vacuum. Also the lift-away feature makes it even lighter when you need to clean up stairs for example – and no cord to pull up the steps.
The most innovative feature is actually in the power head and is why it gets the label DuoClean Technology. There is a spinning bristle brush plus a soft brush that together really do pull up the dust and dirt on carpet or bare floors – especially the finer particles so that for a wood floor it really does polish the flooring.
I do highly recommend this vacuum. It is innovative, well designed, solid and does a great job cleaning your house.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
The Brother Work Smart Series MFC-J895DW is the ideal print, copy, scan and fax solution for home, home office or small office needs. This wireless color inkjet all-in-one delivers reliable, high-quality output and enables wireless mobile device printing from your desktop, laptop, smartphone or tablet. This easy-to-use wireless color inkjet all-in-one delivers affordable printing and has a 2.7" touch screen for effortless workflow navigation. The automatic document feeder, 150-sheet capacity paper tray and bypass tray handle a variety of sizes and specialty papers. Automatic duplex (2-sided) printing helps save paper while the compact design helps save desk space. Cloud connectivity lets you print from and scan to popular Cloud services directly from the printer. There's no network setup needed for Near Field Communications (NFC) one "touch to connect" mobile device printing and scanning. Includes a two-year limited warranty and free online, call, or live chat support for the life of the printer.Prints up to 12 ISO ppm* in black, up to 10 ISO ppm* in color
Customer Rating
5
Capable and Small Footprint
on November 3, 2018
Posted by: RalphHenry
from Youngsville, NC
This is an excellent printer with a small footprint, yet it can fax, scan, copy and print. It can also do 2-sided printing and has a large paper tray capacity of 150 sheets. I did try all the features and it worked flawlessly to scan, fax, copy or print single or double sided. Also you can use NFC connectivity. The setup is simple, it does come with a CD. It is wireless. I thought the printing was less intense than some printers, but there was enough color and I think this will result in more economical ink costs, I’ll keep an eye on this as I use it more.
I like the online manual at https://download.brother.com/welcome/doc100738/cv_dcp772dw_uke_rg.pdf it is worth downloading. It does come with a quick reference and a nice user guide, but having the quick lookup online is easier. Note on this printer you place the documents face-down on the scanner glass or in the document feeder to scan. You may miss the fact that you can put several pages into the document feeder not just one page – it is so compact that you might think its capacity was only single feed. In addition it has a feature that you might overlook but is handy. This feature is the single page manual feed in the back of the printer. It’s useful if you are using decal paper or other specialty papers and don’t want to use your main paper tray – worked very nicely.
It is nice to load the “Brother iPrint & Scan” app to your phone. You can then fax, copy, print or scan to this printer using NFC. For example, you just select a photo, then select to use the Brother iPrint & Scan app and tap the icon on the left side of the machine and it will print your photo – neat.
The plastic parts on this printer seem a little fragile but the new plastics are very strong so I feel it should be durable. I do recommend this printer at this price point for those who want a full function printer with a smaller footprint and not short on technology.
I like the online manual at https://download.brother.com/welcome/doc100738/cv_dcp772dw_uke_rg.pdf it is worth downloading. It does come with a quick reference and a nice user guide, but having the quick lookup online is easier. Note on this printer you place the documents face-down on the scanner glass or in the document feeder to scan. You may miss the fact that you can put several pages into the document feeder not just one page – it is so compact that you might think its capacity was only single feed. In addition it has a feature that you might overlook but is handy. This feature is the single page manual feed in the back of the printer. It’s useful if you are using decal paper or other specialty papers and don’t want to use your main paper tray – worked very nicely.
It is nice to load the “Brother iPrint & Scan” app to your phone. You can then fax, copy, print or scan to this printer using NFC. For example, you just select a photo, then select to use the Brother iPrint & Scan app and tap the icon on the left side of the machine and it will print your photo – neat.
The plastic parts on this printer seem a little fragile but the new plastics are very strong so I feel it should be durable. I do recommend this printer at this price point for those who want a full function printer with a smaller footprint and not short on technology.
Mobile Submission: False
I would recommend this to a friend!
Share this review:
-1point
5of 11voted this as helpful.
Only at Best Buy Dell Inspiron Convertible 2-in-1 Laptop: Enjoy the convenience of a tablet or the functionality of a computer with this Dell Inspiron Starlord laptop. The 15-inch touch screen makes viewing the small details on websites simple, and the Intel Core processor keeps the computer running commands quickly. This Dell Inspiron Starlord laptop has a backlit keyboard so you can type in the dark.
Overall
4 out of 5
4 out of 5physically shake the laptop? Warning
By Kevin
After looking for a powerful engineering laptop to meet my need, this Dell product is a great one. Design is great, sleek, and powerful. Has windows hello, hd screen and a 2 in 1. However it only has 2 USB ports. I wish dell would added more ports. Fast boot up with ssd, and a good backlight keyboard. However after a week of use, when I would hold the laptop and walk you could here a sound. Now this is when it is off. It seems that something is moving inside or it could be from the manufacture. So I returned it and sought to get the replacement. They opened the replacement and when they shaked it the same sound came from it. The best buy rep seemed to say its nothing and it does not matter where I presented this laptop to a computer engineer at my school, who told be its should not be doing that. Now the one on display did not have the defect. But it is amazing that a laptop of this power has this defect. So to wrap up, if you want to buy this laptop make sure to shake it. Seems weird but you don't want to end up loosing your money
RalphHenry
Raleigh, NC
Can Expand Number of USB Ports
February 10, 2017
As you say it has only one 2.0 and only one 3.0 USB port, but this is easily mitigated. For about $20 you can purchase a 4 port USB hub for when you may need added ports. You won't notice any speed difference. Here's one at BBuy: http://www.bestbuy.com/site/insignia-4-port-usb-3-0-hub-black/4333600.p?skuId=4333600 PS: My unit does not make any noise when you shake it, and unless it needs to turn on the fan it has zero noise in operation. I did the fan and it is noticeable but that's good since it is being turned on to ensure cooling.
-1point
0of 1voted this comment as helpful.
Passport® mini offers convenient amplification for any instrument or microphone. It's perfect for performances by street musicians and students, as well as a basic public address system for events and presentations. It goes anywhere thanks to its dual AC- or Battery-powered capabilities. It can even be used as a music media playback system or computer recording interface.
Overall5 out of 5
5 out of 5Great Little Amp & PC Software
By RalphHenry
from Raleigh, NC
This amp is tremendous. No hum and lots of adjustments that at first seem over whelming, but then you catch on and it is reasonably simply to operate. The Fender Fuse software is great. I played around and could hear the difference easily as I changed presets and effects. It is not powerful, but it does have 7 watts RMS, fine for in the house. The software is cool, anything you change on the computer changes the adjustments in the little amp flawlessly. First thing I did was follow the instructions to upgrade the firmware to pick up any fixes or enhancements. Then you just have a ball playing around. It does have a vocal and instrument channel as well as an IPOD or other input. I ran it on batteries as well as AC with the included adapter. It also includes your USB cable to connect to the computer. I'm not an expert so this helps me learn about a lot of effects and styles by letting you hear the differences. GREAT. If you are an experienced guitar player, you will probably have other amps but this one may be nice to practice and learn with.
RalphHenry
Raleigh, NC
Got Another One
February 16, 2017
I gave the first one to my Uncle. I got another one used from a friend that did not work. However it appears that only a loose wire was the cause so it is now fixed. Also did not work on battery power, but I found that the spring contacts for the batteries were smashed down and didn't actually make contact. Once I pulled the contacts out the unit began to work on battery power as well as AC. So if you find a unit not working on battery power check the contacts.
0points
0of 0voted this comment as helpful.
We know pets makes messes. Whether it's tracked-in mud or bathroom accidents, BISSELL® ProHeat 2X® Revolution® Pet Pro Plus carpet cleaner handles those though pet messes with its exclusive Pet Pro Cleanup System. This system includes a CleanShot® pretreater to remove spots and stains; the 2-in-1 Pet Upholstery Tool to remove pet hair, stains and odors from upholstery, a trial-size of BISSELL® PET PRO OXY Urine Eliminator formula, and an EZ Clean Brush Roll Cover to make maintaining the machine easy. When used in MAX Clean Mode, you get powerful cleaning that outcleans the leading rental*** and leaves carpet dry in about 30 minutes with Express Clean Mode.** All of this cleaning power comes in a lightweight and maneuverable machine with a low-profile foot that gets under furniture. But this machine doesn't just pick up after pets, it helps save them, too. BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear.***Cleaning results based on ASTM F2828 using BISSELL PET PRO OXY Urine Eliminator formula in MAX clean mode against the Rug Doctor Mighty Pro X3 carpet cleaner using their top selling formula.**Express Clean Mode (reference instruction in user guide). Tested on new carpet with protectant. Results may vary.
Overall2 out of 5
2 out of 5Sadly, Very disappointed with this cleaner
By Laddie
Pros - Light weight and easy to maneuver - intuitive design makes it easy to use and nice design.
Cons - very low suction and seems to clog up after one use. No horsepower listed on the box and was told it was very powerful by a sales person.
The story - I went to Best Buy to purchase the Hoover SteamVac F7452-900 All Terrain Steam Cleaner with SpinScrub which is advertised being at the store. I have had the Hoover model for over 5 years and it has been an incredible workhorse typically using it twice a week. Strong suction and allowed for quick drying over large areas. We moved from a 6-bedroom home of 3,300 square feet to a 1,000 foot two bedroom two bath apartment. Didn't think I would need all the power of the Hoover but with two small dogs, well, they sometimes miss the puppy pads. I'm hoping I will be able to return the new Bissell for a Hoover.
BEST BUY - this is not a fault of Best Buy - they are a great store that carries quality items - unfortunately I didn't do the homework needed to evaluate this product adequately - I should have waited for the Hoover that I wanted...
Cons - very low suction and seems to clog up after one use. No horsepower listed on the box and was told it was very powerful by a sales person.
The story - I went to Best Buy to purchase the Hoover SteamVac F7452-900 All Terrain Steam Cleaner with SpinScrub which is advertised being at the store. I have had the Hoover model for over 5 years and it has been an incredible workhorse typically using it twice a week. Strong suction and allowed for quick drying over large areas. We moved from a 6-bedroom home of 3,300 square feet to a 1,000 foot two bedroom two bath apartment. Didn't think I would need all the power of the Hoover but with two small dogs, well, they sometimes miss the puppy pads. I'm hoping I will be able to return the new Bissell for a Hoover.
BEST BUY - this is not a fault of Best Buy - they are a great store that carries quality items - unfortunately I didn't do the homework needed to evaluate this product adequately - I should have waited for the Hoover that I wanted...
RalphHenry
Raleigh, NC
Must Vacuum First
May 10, 2017
I think I know why you might have less suction or clogging. I learned this the hard way. It is best to vacuum the carpet prior to using this machine - actually every carpet shampooer requires this step. You may have skipped doing this, but if not you may need to use the tool they include and slide it into the nozzle and remove any hair and other clogs. Anyway it worked great for me. The other area to check is the 'red filter' below the dirty tank, I noticed this gets pretty much completely covered and although you clean the tank you need to also clean this filter (see page 16 of the manual Step 5). Hope this helps.
+8points
8of 8voted this comment as helpful.
Kick your listening experience up to a whole new level with wireless JLab Audio Epic Bluetooth earbuds. The 10-hour battery life lets you enjoy your music all day, and crystal clear radical sound creates a smooth, precise and memorable listening experience. Get the most out of your music, phone calls and audio books with JLab Audio Epic Bluetooth earbuds.
Overall
1 out of 5
1 out of 5Cheap Materials, Bad Sound, Poor Quality Control
By ryanmcv
I wanted to like these, but JLab really dropped the ball with my set of Epic2 headphones. I'd normally list the pros first, but I'm so disappointed that I'm starting with the cons.
CONS:
- The Epic2s are supposed to come with 6 pairs of silicone ear tips. Well, I got 6 ear tips, but not 6 PAIRS of ear tips. My box only had 1 of each type of ear tip. Yes, I looked everywhere - inside the carrying case, in every plastic bag -- they're not there.
- After I removed the headphones from the box, I noticed that the black coating on the cord was starting to peel. This is probably because JLab forcefully bends the cord to fit it into the awkward box. Not a good first impression, and I'm sure it's only going to get worse.
- It's too bad that JLab didn't provide all of the ear tips, because the ones that come installed by default do not fit me well at all. They are way too small for my ears and slide out while I'm running. It would have been nice to try another set of ear tips, but I obviously can't do that.
- These things just aren't comfortable on my ears. The over-ear loops just feel awkward and don't allow much room for adjustment.
- The cord is just ridiculously long. The headphones come with 2 cable clips (which I actually got - yay!), but they are awkward to use and you're warned that using them might kill your Bluetooth connection. No thanks.
- The volume and track control buttons are horribly placed. I feel like I have to reach around and grab the back of my neck if I want to adjust the volume.
- Speaking of sound and volume, these headphones just don't sound good. They are way too bass-heavy and voices/dialogue sound extremely muted.
- The Epic2s are supposed to come with 6 pairs of silicone ear tips. Well, I got 6 ear tips, but not 6 PAIRS of ear tips. My box only had 1 of each type of ear tip. Yes, I looked everywhere - inside the carrying case, in every plastic bag -- they're not there.
- After I removed the headphones from the box, I noticed that the black coating on the cord was starting to peel. This is probably because JLab forcefully bends the cord to fit it into the awkward box. Not a good first impression, and I'm sure it's only going to get worse.
- It's too bad that JLab didn't provide all of the ear tips, because the ones that come installed by default do not fit me well at all. They are way too small for my ears and slide out while I'm running. It would have been nice to try another set of ear tips, but I obviously can't do that.
- These things just aren't comfortable on my ears. The over-ear loops just feel awkward and don't allow much room for adjustment.
- The cord is just ridiculously long. The headphones come with 2 cable clips (which I actually got - yay!), but they are awkward to use and you're warned that using them might kill your Bluetooth connection. No thanks.
- The volume and track control buttons are horribly placed. I feel like I have to reach around and grab the back of my neck if I want to adjust the volume.
- Speaking of sound and volume, these headphones just don't sound good. They are way too bass-heavy and voices/dialogue sound extremely muted.
PROS:
- They turn on and connect to Bluetooth as expected.
- Comes with a nice carrying case.
- Battery life estimate of 12 hours seems to be accurate.
- They turn on and connect to Bluetooth as expected.
- Comes with a nice carrying case.
- Battery life estimate of 12 hours seems to be accurate.
OVERALL:
I've emailed JLab to see about getting replacement ear tips, but even with those, I think I'll still avoid these headphones. I wouldn't want the cord to start peeling apart mid-workout. The title of this review says it all: these headphones are made from cheap materials, have bad sound quality, and apparently go through minimal quality control processes. Avoid at all costs.
I've emailed JLab to see about getting replacement ear tips, but even with those, I think I'll still avoid these headphones. I wouldn't want the cord to start peeling apart mid-workout. The title of this review says it all: these headphones are made from cheap materials, have bad sound quality, and apparently go through minimal quality control processes. Avoid at all costs.
RalphHenry
Raleigh, NC
Just on the ear tips
June 30, 2017
I know you said they were not included and you looked hard, but I found the small bag with one half of the ear tips and on the placard the other half of each size were connected in the cardboard. I would agree it was odd packaging. But I have a feeling that you might (just maybe) have easily tossed them, baby-with-bath-water style.
+1point
1of 1voted this comment as helpful.
RalphHenry's Questions
RalphHenry has not submitted any questions.
Enjoy Full HD viewing with this 25-inch HP micro-edge display. It has one VGA and two HDMI inputs for versatile, high-definition connectivity, and its edge-to-edge panel lets you opt for a clean-looking multi-monitor setup. Play video games smoothly thanks to the AMD FreeSync technology of this thin HP micro-edge display.
There was no vga cable in the box. Should I go to best buy or hp?
I don't think HP provides a VGA cable with this unit, only the HDMI cable. You will have to purchase one. Of course an old VGA cable will work fine. If you can switch to HDMI it is much better and of course VGA is being phased out.
5 years, 10 months ago
by
RalphHenry
Strengthen your phone’s 4G reception while you’re on the road with the weboost Drive Sleek cradle signal booster. Its powerful outside antenna detects an accessible 4G/LTE or 3G signal and transmits it to the booster unit for enhanced data reception. This versatile weboost Drive Sleek cradle signal booster is compatible with all US and Canadian network providers.
Will my Note 8 work with this
It says on the box that Galaxy Note 8 is compatible, but Google your phone to be sure.
6 years ago
by
RalphHenry
Strengthen your phone’s 4G reception while you’re on the road with the weboost Drive Sleek cradle signal booster. Its powerful outside antenna detects an accessible 4G/LTE or 3G signal and transmits it to the booster unit for enhanced data reception. This versatile weboost Drive Sleek cradle signal booster is compatible with all US and Canadian network providers.
Is this booster compatible with Verizon?
I don't think it is a question of carrier but rather the model of your cell phone. You can google to see if your phone is compatible. Also look on the box for those few iPhones and Samsung phones listed.
6 years ago
by
RalphHenry
Strengthen your phone’s 4G reception while you’re on the road with the weboost Drive Sleek cradle signal booster. Its powerful outside antenna detects an accessible 4G/LTE or 3G signal and transmits it to the booster unit for enhanced data reception. This versatile weboost Drive Sleek cradle signal booster is compatible with all US and Canadian network providers.
will it work to my phone blackberry classic? i plan to use it not in the car, is it ok to supply the power cable with other supply of 12VDC?
You better go here and look for your Classic model and see if it will work. https://help.blackberry.com/en/blackberry-classic/10.3.1/help/amc1415722640609.html
6 years ago
by
RalphHenry
Samsung 3 Chromebook: Get compact power with this Samsung Chromebook laptop. Its 11.6-inch HD display provides clear graphics with anti-reflective technology, and its 4GB of RAM and Intel Celeron processor keep multitasking operations moving smoothly. This Samsung Chromebook laptop includes a 720-pixel camera and a 32GB flash drive to store documents, photos and programs.
Can I add outlook to Samsung - 11.6" Chromebook - Intel Celeron - 4GB Memory - 32GB eMMC Flash Memory - Metallic Black
Yes, go here to see how: https://support.office.com/en-us/article/how-to-install-and-run-microsoft-office-on-a-chromebook-32f14a23-2c1a-4579-b973-d4b1d78561ad
6 years, 1 month ago
by
RalphHenry
Take your music anywhere with this portable Sony wireless speaker. Lightweight and water-resistant, it has a 16-hour battery life, making it perfect for on-the-go listening all day. This Sony wireless speaker has Bluetooth connectivity with NFC One-touch, and it can also link to a second speaker for stereo sound.
We have a 2007 Insignia Flat Screen TV. How do we know if it is Bluetooth compatible? We have Xfinity as our cable provider.
In 2007 it is probably not Bluetooth. It won't have anything to do with your cable provider. To see if the TV happens to be Bluetooth compatible I would try this. Select Menu or Settings. Look for something like 'Add Accessory' or pair with Bluetooth Device.. You might also look for Audio settings but that is less likely. Now your TV probably does have an Audio Out Jack of the 3.5mm variety. The speaker also has a little Audio In jack. You would need a cable like this one https://www.bestbuy.com/site/insignia-6-3-5mm-mini-audio-cable-black/4370001.p?skuId=4370001 from Best Buy. Simply plug in to both the TV and speaker and you are good to go. Now if you don't have the 3.5mm jack on your TV you probably have Audio Out on RCA jacks, in that case get this cable to connect: https://www.bestbuy.com/site/insignia-6-3-5mm-mini-to-rca-stereo-audio-cable-black/4408001.p?skuId=4408001
6 years, 3 months ago
by
RalphHenry
Ensure safe listening with these Insignia kids' headphones. Children can listen to high-quality audio through the 40mm drivers without damaging their hearing; the headphones' built-in volume-limiting function keeps the decibel level low to protect small ears. These Insignia kids' headphones have a share port that enables the connection of a second pair of headphones.
Is it has a microphone
Nest Doorbell (Wired) lets you know who’s there, so you never miss a thing. It replaces your existing wired doorbell and delivers HD video and bright, crisp images, even at night. It’s designed to show you everything at your doorstep — people head to toe or packages on the ground. And with 24/7 streaming, you can check in anytime. Or go back and look at a 3-hour snapshot history to see what happened.*
Will Google Hello do a better job in regards to lag (delay) and motion detection? I had another video doorbell (rhimes with Ding) which could not adequately connect to the wifi, terrable lag, poor motion detection (false alarms and missed live ones).
Delay is a second or so on the NEST HELLO. I know because as I tested it, I could hear my wife talk inside and then hear her voice outside; and vice-versa. So it is not what I'd consider a problem.
6 years, 3 months ago
by
RalphHenry
Nest Doorbell (Wired) lets you know who’s there, so you never miss a thing. It replaces your existing wired doorbell and delivers HD video and bright, crisp images, even at night. It’s designed to show you everything at your doorstep — people head to toe or packages on the ground. And with 24/7 streaming, you can check in anytime. Or go back and look at a 3-hour snapshot history to see what happened.*
What are the dimensions And is there a charge
There is a charge to keep NEST AWARE functions, $10 or so per month. But you do not need it to see and hear and talk to people at the door.
6 years, 3 months ago
by
RalphHenry
Only at Best Buy Defend your home from intruders with this SimpliSafe security system. Its wireless design provides reliable, multilayer protection and avoids interruptions from cut phone lines and power outages, and it connects to an app for remote operation. This SimpliSafe security system is easy to install and customizable to homes of any size for flexible use.