emiliosic's stats
- Review count208
- Helpfulness votes1,299
- First reviewJune 21, 2013
- Last reviewOctober 27, 2024
- Featured reviews0
- Average rating4.6
Reviews comments
- Review comment count0
- Helpfulness votes0
- First review commentNone
- Last review commentNone
- Featured review comments0
Questions
- Question count0
- Helpfulness votes0
- First questionNone
- Last questionNone
- Featured questions0
- Answer count90
- Helpfulness votes176
- First answerDecember 10, 2014
- Last answerNovember 4, 2021
- Featured answers0
- Best answers17
Make your home an internet haven with this versatile Linksys Velop wireless Wi-Fi system. Three identical tri-band dual-stream AC2200 routers, each equipped with a quad-core ARM Cortex-A7 processor, deliver lightning-fast internet. Equipped with Bluetooth 4.0/LE, this Linksys Velop wireless Wi-Fi system is simple to set up and pairs easily with computers, tablets and smart devices.
Customer Rating
3
Excellent hardware with simplistic software
on January 15, 2017
Posted by: emiliosic
from Wakefield, MA
Trying very hard to make an excellent good impression, the packaging for this very well accomplished: The box opens from a cloth tab with magnetic latches, with the units well centered, cables wrapped with details and covered.
The hardware itself is very well designed. There are three Velop units. All are the exact same. There is no 'master' hardware unit - The router will be one connected to the modem. There is one status light on top and on the bottom there is a standard round power, an on/off switch, a reset button that is recessed but doesn't need a pin to recess, and two Ethernet ports. There is not WAN/LAN: Connect the modem to one of the ports and the install assistant will figure it out. Also note there is no USB port.
Each unit is about 2.5" x 2.5" x 7.5" tall. It's slender with flat surfaces on two sides, a grille on the other two sides and top. Cables are managed through one of the corners.
The power supply is rather bulky if trying to put it on a power strip, but It looks right plugged directly to an outlet, leaving enough space for another plug. However, even the power supply has clean lines so it wouldn't clash on a modern home if left exposed.
The hardware itself is very well designed. There are three Velop units. All are the exact same. There is no 'master' hardware unit - The router will be one connected to the modem. There is one status light on top and on the bottom there is a standard round power, an on/off switch, a reset button that is recessed but doesn't need a pin to recess, and two Ethernet ports. There is not WAN/LAN: Connect the modem to one of the ports and the install assistant will figure it out. Also note there is no USB port.
Each unit is about 2.5" x 2.5" x 7.5" tall. It's slender with flat surfaces on two sides, a grille on the other two sides and top. Cables are managed through one of the corners.
The power supply is rather bulky if trying to put it on a power strip, but It looks right plugged directly to an outlet, leaving enough space for another plug. However, even the power supply has clean lines so it wouldn't clash on a modern home if left exposed.
As for radios, it's a 'Tri-Band AC2200' radio, so it means two current-generation AC (5 Ghz) and one 2.4 Ghz radio, additionally each node has Bluetooth, which is used for initial configuration, and the nodes communicate through a private link, so unlike Wi-Fi repeaters, each node can provide full bandwidth. This is the reason why someone would by a 'Mesh' system. Our internet is 100/100 and got full bandwidth from one of the two satellite units, so the mesh system works as promised.
Linksys promises 3-year warranty which is exceptional.
Linksys promises 3-year warranty which is exceptional.
What left me sorely disappointed is the software, which I hope Linksys addresses in short order: The system is the simplest possible to install. There is no documentation enclosed with the router, only a card indicating to download an app (iOS or Google Play only).
From the app (and only the app, because there is absolutely no web access from a PC to these routers), a step-by step assistance guides through the setup of the first router, and then the other two units. Do not attempt to connect all at one or it might trip the assistant, having to reset one of the units as it happened to me.
Then after a few minutes per unit, the system is ready, and registers the units with Linksys, so it can be managed and monitored from the app even outside the house.
While Linksys managed to achieve a very simple to install product, it's disappointingly limited: If the units are connected to a router instead of a (cable/DSL) modem, it's incapable of working in access point mode, so for FiOS or other providers that require a router, it will create a double NAT. There is no way to configure 3rd party DNS servers (Like OpenDNS or Google). There is limited parent control functionality from within the app.
There is also Amazon Alexa integration to turn on or off guest networks, or read the access credentials. The Alexa skill is currently unpublished and Linksys promises it will expand it. I found it after some googling on a 3rd party skill listing, while Linksys is promoting that the Alexa skill is available.
Looks like Linksys rushed to announce this device at CES, and while I can wholeheartedly recommend the hardware, and I think it's the best mesh router in the market, hardware-wise, the software is sub-par anything else I've seen from Belkin or Linksys.
Because I wanted to keep using my current router and use these as access point, I'm unable to use these until Linksys updates the software on these, and having kids at home, I depend on OpenDNS to filter some content.
However, if you don't have FiOS, don't have a service provider that requires to use their own router (ie, you have a DSL or standard cable modem), and have no issues with limited network configuration options, this can be a great solution that will cover most large houses without dead spots, and using full Wi-Fi performance.
From the app (and only the app, because there is absolutely no web access from a PC to these routers), a step-by step assistance guides through the setup of the first router, and then the other two units. Do not attempt to connect all at one or it might trip the assistant, having to reset one of the units as it happened to me.
Then after a few minutes per unit, the system is ready, and registers the units with Linksys, so it can be managed and monitored from the app even outside the house.
While Linksys managed to achieve a very simple to install product, it's disappointingly limited: If the units are connected to a router instead of a (cable/DSL) modem, it's incapable of working in access point mode, so for FiOS or other providers that require a router, it will create a double NAT. There is no way to configure 3rd party DNS servers (Like OpenDNS or Google). There is limited parent control functionality from within the app.
There is also Amazon Alexa integration to turn on or off guest networks, or read the access credentials. The Alexa skill is currently unpublished and Linksys promises it will expand it. I found it after some googling on a 3rd party skill listing, while Linksys is promoting that the Alexa skill is available.
Looks like Linksys rushed to announce this device at CES, and while I can wholeheartedly recommend the hardware, and I think it's the best mesh router in the market, hardware-wise, the software is sub-par anything else I've seen from Belkin or Linksys.
Because I wanted to keep using my current router and use these as access point, I'm unable to use these until Linksys updates the software on these, and having kids at home, I depend on OpenDNS to filter some content.
However, if you don't have FiOS, don't have a service provider that requires to use their own router (ie, you have a DSL or standard cable modem), and have no issues with limited network configuration options, this can be a great solution that will cover most large houses without dead spots, and using full Wi-Fi performance.
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
-1point
0of 1voted this as helpful.
Arlo Pro takes the worrying out of life with the 100% Wire-Free indoor/outdoor home monitoring system. Arlo Pro includes rechargeable batteries, motion and sound-activated alerts, 2-way audio, a 100+ decibel siren, and 7 days of free cloud HD video recordings. Arlo covers every angle to help keep you safe and protected.
Customer Rating
5
Excellent simplicity
on January 11, 2017
Posted by: emiliosic
from Wakefield, MA
The Arlo cameras are unique because they can run for weeks on batteries, no cables whatsoever. After about a week of use, the cameras still report a fully charged battery.
To start, I was impressed on how well this is packed. Someone put a lot of attention to the packaging, with drawers inside the box with compartments on it.
To be clear, this kit includes: One base station, two cameras with Li-Ion batteries and one charger.
The base station is required for the cameras to work. The cameras are paired to the base station that is basically a custom Wi-Fi router dedicated for the cameras. It also has a 100db siren built-in, so consider where you'll be placing this. Also it needs to connect to a home router via Ethernet cable (not Wi-Fi), so in most cases ends up being next to the home router. The base also has two USB ports for local storage.
The cameras are small, weather proof, have a motion detector, night vision, motion detection, speaker and mic. The batteries are replaceable and it's charged via a standard micro-USB cable. Note that the charger supports Qualcomm Quick Charge (Like some Android phones, it can recharge the batteries in minutes).
Initial pairing is extremely easy. Once the base station is connected to the router, go to a web page or start an app (on the same network as the base), go through a simple registration and will show you how to pair the cameras (it's just pressing a button on the base and one on the camera, just like a Wi-Fi router).
Then the web page or app, which are very similar, lets you configure the names for the area, name of the base station, and for the cameras, motion detection and night vision settings, etc.
The cameras have a strong magnet on the rear and it comes with a metal half-sphere that can be mounted on the wall, and can optionally be mounted with a standard camera mount. Remember that unless the camera is connected via USB, you'll need to re-charge them every once in a while.
The cameras can be 'armed' based on a button on the app/web, a schedule or geo-fences. Once a camera is 'armed' it records 10-second videos whenever it detects movement. It sends a push notification to the phone, where you can see the video, and if you want, put the camera in live mode, which shows audio and video, and has a push-to-talk mode so you can talk though the camera (it has a delay of one or two seconds). The amount of time it records can be configured from 10 seconds to 2 minutes.
The app is very easy to use. There is no subscription required if, like me, are happy with one week of storage, it keeps the videos it makes for 7 day, and then it rotates (deletes) them out. Other plans seem reasonably priced.
Note that to record locally, add a USB memory stick to the base. This is optional, and it's not intended to continually broadcast video, like a surveillance system.
There is a 'live' mode that can be triggered from the web site or apps. Note that it will stream to only one device at a time, but multiple cameras can display video.
The cameras also support integration with few home automation systems like wink or smartthings, and through ifttt, integrates with Amazon Alexa and Google Assistant to arm/disarm and initiate a recording. The platform isn't open so you cannot just record from a web link like on other IP cameras.
Also note that although the cameras use Wi-Fi, they need the base and use their own Wi-Fi network with its base. The security on these cameras appears to be solid. A network scanner shows no open ports on the base, which is good, and the cameras are not directly connected to the network, they go through the base station.
The images are clear in both day and night modes.
Besides the web page, there are apps for iOS (phone/tablet), Android and Amazon fire. Also there is an app for Apple TV that works great to see recordings, arm/disarm.
(Note, there are no electric wires on the enclosed image. The camera mount is held by a hook).
To start, I was impressed on how well this is packed. Someone put a lot of attention to the packaging, with drawers inside the box with compartments on it.
To be clear, this kit includes: One base station, two cameras with Li-Ion batteries and one charger.
The base station is required for the cameras to work. The cameras are paired to the base station that is basically a custom Wi-Fi router dedicated for the cameras. It also has a 100db siren built-in, so consider where you'll be placing this. Also it needs to connect to a home router via Ethernet cable (not Wi-Fi), so in most cases ends up being next to the home router. The base also has two USB ports for local storage.
The cameras are small, weather proof, have a motion detector, night vision, motion detection, speaker and mic. The batteries are replaceable and it's charged via a standard micro-USB cable. Note that the charger supports Qualcomm Quick Charge (Like some Android phones, it can recharge the batteries in minutes).
Initial pairing is extremely easy. Once the base station is connected to the router, go to a web page or start an app (on the same network as the base), go through a simple registration and will show you how to pair the cameras (it's just pressing a button on the base and one on the camera, just like a Wi-Fi router).
Then the web page or app, which are very similar, lets you configure the names for the area, name of the base station, and for the cameras, motion detection and night vision settings, etc.
The cameras have a strong magnet on the rear and it comes with a metal half-sphere that can be mounted on the wall, and can optionally be mounted with a standard camera mount. Remember that unless the camera is connected via USB, you'll need to re-charge them every once in a while.
The cameras can be 'armed' based on a button on the app/web, a schedule or geo-fences. Once a camera is 'armed' it records 10-second videos whenever it detects movement. It sends a push notification to the phone, where you can see the video, and if you want, put the camera in live mode, which shows audio and video, and has a push-to-talk mode so you can talk though the camera (it has a delay of one or two seconds). The amount of time it records can be configured from 10 seconds to 2 minutes.
The app is very easy to use. There is no subscription required if, like me, are happy with one week of storage, it keeps the videos it makes for 7 day, and then it rotates (deletes) them out. Other plans seem reasonably priced.
Note that to record locally, add a USB memory stick to the base. This is optional, and it's not intended to continually broadcast video, like a surveillance system.
There is a 'live' mode that can be triggered from the web site or apps. Note that it will stream to only one device at a time, but multiple cameras can display video.
The cameras also support integration with few home automation systems like wink or smartthings, and through ifttt, integrates with Amazon Alexa and Google Assistant to arm/disarm and initiate a recording. The platform isn't open so you cannot just record from a web link like on other IP cameras.
Also note that although the cameras use Wi-Fi, they need the base and use their own Wi-Fi network with its base. The security on these cameras appears to be solid. A network scanner shows no open ports on the base, which is good, and the cameras are not directly connected to the network, they go through the base station.
The images are clear in both day and night modes.
Besides the web page, there are apps for iOS (phone/tablet), Android and Amazon fire. Also there is an app for Apple TV that works great to see recordings, arm/disarm.
(Note, there are no electric wires on the enclosed image. The camera mount is held by a hook).
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
These Panasonic eneloop BK-4MCCA4BA AAA batteries come precharged and can operate in subzero temperatures for an efficient and durable design. Recharge the batteries up to 2100 times for long-lasting use.
Customer Rating
5
Best NiMH batteries
on December 9, 2016
Posted by: emiliosic
from Wakefield, MA
Verified Purchase:Yes
I've used Eneloop batteries for about 10 years. Got tired of rechargeable batteries that would discharge after a few days or wouldn't hold charge after a few charges. These can hold charge for months and can be recharged hundreds of times. Used them in electronic toys, remotes, flashlights, etc.
My Best Buy number: 0784609086
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Keep unwanted hair to a minimum with this Philips grooming tool. The waterproof design lets you use it in the shower, and eight attachments make this trimmer perfect for grooming different sections of the face. This Philips grooming tool has a turbo setting to increase cutting speed, and it charges in just one hour to reduce wait time.
Customer Rating
5
'Head to toe' trimmer.
on November 19, 2016
Posted by: emiliosic
from Wakefield, MA
Over the years, had several shavers and grooming tools from Philips / Norelco.
This is the best trimmer yet. It's advertised as 'Head to toe' grooming and it does not disappoint.
It comes with the main body, which is the same across 7000 series (and similar to newer shavers), foil body groomer, tube nose trimmer, full-size trimmer, detail trimmer and three combs: Body, beard and hair, a storage pouch and some lube for the full-size trimmer.
It comes with the main body, which is the same across 7000 series (and similar to newer shavers), foil body groomer, tube nose trimmer, full-size trimmer, detail trimmer and three combs: Body, beard and hair, a storage pouch and some lube for the full-size trimmer.
Unlike older models, this is powered by a Li-Ion battery (non-replaceable). This makes a big difference, because older models with Ni-Cd or Ni-Mh batteries wouldn't hold much charge after two years. It also claims to last up to 60 minutes between charges (when new).
The bodygroom is one of the most useful attachments. This is basically the same bodygroomer they've been selling for years and works very well. The foil is a replaceable cartridge. In my previous experience, it can last well over two years.
The full size trimmer is what all the combs are used with and works very well.
The detail trimmer would be best used on sideburns, etc.
The nose trimmer works well. To me, the tube design in this worked better than the circular model used in the past.
The full size trimmer is what all the combs are used with and works very well.
The detail trimmer would be best used on sideburns, etc.
The nose trimmer works well. To me, the tube design in this worked better than the circular model used in the past.
It can be used in the shower, and has two-year warranty. It also comes with a storage pouch.
The charger works in 110-240 (N. American plug only).
The charger works in 110-240 (N. American plug only).
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Listen to the radio, capture images and enjoy a traditional clamshell design with this BLU DivaFlex cellphone. It includes dual SIM capabilities so that you can have two numbers at once, yet its simple operation ensures that answering it is intuitive - when the BLU DivaFlex cellphone rings, simply flip up the phone.
Customer Rating
4
Very simple
on November 11, 2016
Posted by: emiliosic
from Wakefield, MA
Verified Purchase:Yes
Very simple smartphone, with intuitive menus. Handsfree bluetooth, basic camera with flash (flash works as a flashlight also). This phone is fairly affordable, and it's 3G unlocked with two SIM slots, one micro-SD (for photo storage), removable battery. The two SIM slots are good for traveling abroad. It charges with a standard micro-SD.
Screen is bright and buttons are big with a backlight.
Note that although it has bluetooth, I could not copy contacts from another phone, which seems to be a limitation with this phone.
It's good for older people, or for traveling / emergency phone.
Screen is bright and buttons are big with a backlight.
Note that although it has bluetooth, I could not copy contacts from another phone, which seems to be a limitation with this phone.
It's good for older people, or for traveling / emergency phone.
My Best Buy number: 0784609086
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
+4points
4of 4voted this as helpful.
Simplify your everyday life with the Google Home, a voice-activated speaker powered by the Google Assistant. Use voice commands to enjoy music, get answers from Google and manage everyday tasks. Google Home is compatible with Android and iOS operating systems, and can control compatible smart devices such as Chromecast or Nest."
Customer Rating
3
'good enough'
on November 9, 2016
Posted by: emiliosic
from Wakefield, MA
Reviewing Google Home without comparing it with other related offerings wouldn’t explain it properly, and I happen to have multiple Echo devices though the house, so comparisons are inevitable.
Design: It looks like a vase. There are no inscriptions on the front or top. On the back, there's a simple G logo, power light and mute button. It's a grayish white reminiscent of some IKEA like plastics. The top has a touch-sensitive surface with hidden multicolor LEDs that light up when prompted. Tapping on the surface stops whatever it's doing, and scrolling in circle, like an iPod, controls the volume. The bottom quarter is a removable mesh, and can be ordered separately in different colors. Disconnect the power cord to remove it, and it snaps back in place with magnets. It is wider than an echo.
Audio: It has three speakers. It sounds great as a voice assistant but music audio leaves a lot to be desired. It lacks bass, depth and presence. It sounds clear but not enjoyable to listen to. On the plus side, it holds up very well when it's played loudly. Sound actually seems to improve a bit when it's played loud. My computer speakers sound better than this. Also the original Echo sounds a lot better, with more presence, although it isn't great either. It doesn't have Bluetooth, so it's limited on what it can play and cannot use remote speakers, except for ones attached to a chromecast, and it doesn't play on other speakers by default either: one has to tell it where to play each time. It also works as an audio chromecast, so any app that supports audio cast would work. Currently, audio sources are limited to Google Music (including a free tier of stations), YouTube Red (subscription), Spotify and Pandora. Most notably it doesn't support internet radio, at least not yet, unlike Echo.
Home integration: It pales in comparison to the Echo or to Apple's Siri. Currently, it only integrates with Google's Nest thermostat, Samsung SmartThings and Philips Hue. Of these, I could only test it with Hue. It works well, but it has a major flaw: You can tell it to 'turn off the light' without specifying a room and it will turn off every - hue light - in - the - house, causing major havoc. Otherwise it knows the concept of rooms (like the Echo), but it's not aware of where it is, and these quirks cannot be changed as of today. There is no external API yet. Amazon Echo's free API are very well documented with a very active developer base. Now word yet on what Google plans to go with it.
Voice recognition: This is where it shines. It understands voice commands very well, even for younger kids and accents. Far field voice recognition seems to be on par with Echo (this is speaking to it from the other side of a room, and have only the nearest device reply, like the echo, although I only have one Google Assistant). As expected from Google, it understands variations in semantics better than Echo, and for general trivia questions it's more useful, like integration with Google Translate, so it can speak back phrases in different languages when asked to do so. It also integrates with Google Calendar, as expected, but there's nothing it can do if Google isn't your calendar provider. It also, sometimes, follows conversation, like when asking a related question based on a previous answer, but this doesn't work too well yet.
Like Echo, it has a customizable news feed, but from google approved providers. It doesn't yet have the equivalent of third-party skills like Echo, and unlike the Echo, all the content is pre-recorded.
Unlike the echo, it doesn't show cards on nearby tablets or phones when asked a research question.
Like Echo, it has a customizable news feed, but from google approved providers. It doesn't yet have the equivalent of third-party skills like Echo, and unlike the Echo, all the content is pre-recorded.
Unlike the echo, it doesn't show cards on nearby tablets or phones when asked a research question.
Control: Google renamed the formerly very simple chromecast setup app into the Google Assistant controller app that does a lot more now. There is no web interface to control it (Unlike the Echo that has both a simple web interface and orderly app).
It's awaken by two keywords "OK Google" and "Hey Google", which is not configurable. This gets old very, very fast. To me, being able to give it a shorter name (Alexa or Echo or Siri) makes it more personable. I can't stress how annoying this gets, specially when listening to audio, one has to say "Ok google, skip", etc.
It also has some quirks; like pressing the mic mute button will first loudly announce that will mute its mic before doing so, and same when pressing it back. (For comparison, Echo's rim simply turns red, quietly); or it would repeat the city/town name over and over when asked for weather, which is irrelevant in a normal conversation.
For most questions that it doesn't understand, it will happily announce that it cannot do that yet, but it's still learning, over and over every time it doesn't get it.
It also has some quirks; like pressing the mic mute button will first loudly announce that will mute its mic before doing so, and same when pressing it back. (For comparison, Echo's rim simply turns red, quietly); or it would repeat the city/town name over and over when asked for weather, which is irrelevant in a normal conversation.
For most questions that it doesn't understand, it will happily announce that it cannot do that yet, but it's still learning, over and over every time it doesn't get it.
So, overall, if one is heavily invested in Google services, already has at least one chromecast go ahead. For most households with mixed devices, it's harder to justify. It's a good first effort, but two years later than Echo, it's different but not better than Echo. However looking ahead of hardware limitations like a speaker that isn’t good enough for music of the lack of bluetooth, it will very likely keep on improving.
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
-1point
0of 1voted this as helpful.
Connect your external wireless devices to the internet with this Linksys dual-band router. Two 5Ghz bands support both high-end gaming and low-end applications without compromising speed, and remote management lets you make adjustments from any location. This Linksys dual-band router has a sleek design that integrates easily into most workspaces.
Customer Rating
5
Winning combination
on November 2, 2016
Posted by: emiliosic
from Wakefield, MA
This is the first consumer router to support 160 Mhz channels. The first 'ac' routers supported 20 Mhz and 40 Mhz channels. Most high throughput routers works with 80 Mhz channels (with one or two independent 5 Mhz radios). This router uses a very new AC with dual 160 Mhz channels and simultaneous 2.4 Mhz radios.
This means a theoretical speed of 867 Mhz per channel (two channels in 5 Mhz) and also supports DFS, which dynamically selects the best channels available for less interference.
This means a theoretical speed of 867 Mhz per channel (two channels in 5 Mhz) and also supports DFS, which dynamically selects the best channels available for less interference.
On the software side, it comes with standard Linksys software. If you're familiar with the EA line, this is nothing new. However this is a 'WRT' router, meaning that open source alternatives OpenWrt and DD-WRT are openly supported by Linksys. Both distros already offer builds for this router.
The standard software has a remote access app for Android/iOS that works very well (this is completely optional, not required). Also, it supports OpenVPN out of the box. This is a nice surprise, and it's one big reason why many would install OpenWrt or DD-WRT, so for now I'm using it with the standard software.
It has a dual-code Marvell CPU, one USB 3.0 and one SATA/USB 2 port for file sharing (supports SMB and FTP), and can read FAT32, NTFS and HFS (Mac) partitions. It also supports DLNA.
The four antennas are removable.
The bottom feet have markings for wall-mounting, has a power switch on the rear and four LAN ports.
The power supply is quite large and has no extension cable on the power socket, which might annoy some.
The white LEDs on the front and rear Ethernet LEDs can be turned off from the web interface.
The enclosure design is a throwback to the old Linksys designs from late '90s, so it's likely something most people won't expose (Nerdy yes, but not pretty). I'm using mine on a basement and feeds a two-story house with no issue. It covers the backyard and have reasonable reception from a sidewalk across the street. Have good to excellent Wi-Fi connectivity through the whole medium-size house.
As for internet, we have a symmetric 100 Mb connection and gets full bandwidth on speed tests, tested with Ookla Speedtest for iOS.
Going back to the standard linksys software , is very easy to configure, and fairly complete with a very useful graphical map on the web page, standard DHCP and NAT forwarding. Very rudimentary parental controls, but as I said, supports OpenVPN with a very simple to use web interface, while most will end up using OpenWrt or DD-WRT, and Linksys openly supports these.
I'll wait a few more weeks before going to OpenWrt since the images for this hardware is so new, but this time Linksys is openly supporting these, so it should go smoothly.
We have a lot of WiFi devices: Mac, Win7, Win10, iOS, Android, Fire, Roku, Chromecast and other IoT devices. All of them are connecting without issues. I want to get a good feeling of how it works with the stock software first.
The standard software has a remote access app for Android/iOS that works very well (this is completely optional, not required). Also, it supports OpenVPN out of the box. This is a nice surprise, and it's one big reason why many would install OpenWrt or DD-WRT, so for now I'm using it with the standard software.
It has a dual-code Marvell CPU, one USB 3.0 and one SATA/USB 2 port for file sharing (supports SMB and FTP), and can read FAT32, NTFS and HFS (Mac) partitions. It also supports DLNA.
The four antennas are removable.
The bottom feet have markings for wall-mounting, has a power switch on the rear and four LAN ports.
The power supply is quite large and has no extension cable on the power socket, which might annoy some.
The white LEDs on the front and rear Ethernet LEDs can be turned off from the web interface.
The enclosure design is a throwback to the old Linksys designs from late '90s, so it's likely something most people won't expose (Nerdy yes, but not pretty). I'm using mine on a basement and feeds a two-story house with no issue. It covers the backyard and have reasonable reception from a sidewalk across the street. Have good to excellent Wi-Fi connectivity through the whole medium-size house.
As for internet, we have a symmetric 100 Mb connection and gets full bandwidth on speed tests, tested with Ookla Speedtest for iOS.
Going back to the standard linksys software , is very easy to configure, and fairly complete with a very useful graphical map on the web page, standard DHCP and NAT forwarding. Very rudimentary parental controls, but as I said, supports OpenVPN with a very simple to use web interface, while most will end up using OpenWrt or DD-WRT, and Linksys openly supports these.
I'll wait a few more weeks before going to OpenWrt since the images for this hardware is so new, but this time Linksys is openly supporting these, so it should go smoothly.
We have a lot of WiFi devices: Mac, Win7, Win10, iOS, Android, Fire, Roku, Chromecast and other IoT devices. All of them are connecting without issues. I want to get a good feeling of how it works with the stock software first.
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
Keep your home dust-free with this Bissell AirRAM cordless vacuum. Its high-performance F.U.E.L. cell provides up to 30 minutes of run time, while the advanced compression technology lets it store as much dirt as typical bagless vacuums. This Bissell AirRAM cordless vacuum has a low profile for easy maneuvering around furniture.
Customer Rating
5
Fresh design, well engineered
on October 23, 2016
Posted by: emiliosic
from Wakefield, MA
This vacuum is unlike anything else.
Opening the box, I was pleasantly surprised on how organized it is, like opening a high end electronics. Inside the carton there is another box with a handle, which opens like a folder and each piece is neatly organized.
Putting it together takes just as minute.
The vacuum itself is very compact. All the components are on the base. The handle is quality plastic and aluminum, making it lightweight. It even has an extra handle to lift it. The handle swivels making maneuvering the vacuum very easy.
The Li-Ion battery pack is removable (similar to power tools) and can be charged on the vacuum or stand-alone. This is great because it could have an additional battery pack, and the vacuum doesn't have to be discarded when the battery dies, like on some stick vacuums. Status LEDs are also part of the battery cartridge. It indicates charging, charge and faults.
Opening the box, I was pleasantly surprised on how organized it is, like opening a high end electronics. Inside the carton there is another box with a handle, which opens like a folder and each piece is neatly organized.
Putting it together takes just as minute.
The vacuum itself is very compact. All the components are on the base. The handle is quality plastic and aluminum, making it lightweight. It even has an extra handle to lift it. The handle swivels making maneuvering the vacuum very easy.
The Li-Ion battery pack is removable (similar to power tools) and can be charged on the vacuum or stand-alone. This is great because it could have an additional battery pack, and the vacuum doesn't have to be discarded when the battery dies, like on some stick vacuums. Status LEDs are also part of the battery cartridge. It indicates charging, charge and faults.
An very unique feature is that the roller is surrounded by rubber strips that when on the floor creates a vacuum so the suction is very good, on par or better than on corded vacuums. It picked up amounts of dirt from an area rug that the previous vacuum wouldn't.
The base is fairly low profile and the handle goes flat to the floor so it can easily reach under beds.
The front of the vacuum has LED strips that makes it easy to see where it goes.
The roller has enough power to help push the vacuum forward, and is has a tangle detection feature that will stop the vacuum if it gets tangled. I haven't seen any other vacuum do that.
The battery lasts about 30 minutes on hardwood floors, and feels like it's working harder on rugs. The roller can be removed if used on shaggy rugs. One caveat is that the roller can accumulate hair, although it's very easy to remove: Push a pin on the side and comes off.
The bin and filter are all in one piece, and comes off easily by just lifting it off the vacuum. The bin is light and small. When opening it to empty, there is a handle to help push all the dirt out without having to touch the container. No need to shake it to get dust balls off.
There is a replaceable filter in form of a tube that can be rinsed clean, and that's inside the bin, so all the dirty parts are self-contained.
The handle stays upright on its own. I have to hold the base with one foot so start it, so it won't fall off when not in use. Having a swiveling handle makes it very easy to use. The handle can be retracted in half to keep it very compact, and can be completely removed with a push of a button or folded in half for storage.
When it's turned on, there's a soft chime indicating it's all well and it immediately starts.
Overall it's an excellent machine, with sensible industrial design and good engineering. I'm very satisfied with it.
The front of the vacuum has LED strips that makes it easy to see where it goes.
The roller has enough power to help push the vacuum forward, and is has a tangle detection feature that will stop the vacuum if it gets tangled. I haven't seen any other vacuum do that.
The battery lasts about 30 minutes on hardwood floors, and feels like it's working harder on rugs. The roller can be removed if used on shaggy rugs. One caveat is that the roller can accumulate hair, although it's very easy to remove: Push a pin on the side and comes off.
The bin and filter are all in one piece, and comes off easily by just lifting it off the vacuum. The bin is light and small. When opening it to empty, there is a handle to help push all the dirt out without having to touch the container. No need to shake it to get dust balls off.
There is a replaceable filter in form of a tube that can be rinsed clean, and that's inside the bin, so all the dirty parts are self-contained.
The handle stays upright on its own. I have to hold the base with one foot so start it, so it won't fall off when not in use. Having a swiveling handle makes it very easy to use. The handle can be retracted in half to keep it very compact, and can be completely removed with a push of a button or folded in half for storage.
When it's turned on, there's a soft chime indicating it's all well and it immediately starts.
Overall it's an excellent machine, with sensible industrial design and good engineering. I'm very satisfied with it.
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
0points
1of 2voted this as helpful.
Tackle the biggest messes with this Bissell Crosswave all-in-one multi-surface cleaner. A dual-action roller scrubs and picks up debris at the same time to reduce the number of passes you need to make, and the convenient fingertip controls let you switch functions quickly and easily. This Bissell Crosswave all-in-one multi-surface cleaner has swivel steering for increased control.
Customer Rating
5
Mop plus vacuum
on September 29, 2016
Posted by: emiliosic
from Wakefield, MA
This combines a mopping roller and vacuum in one step. Because it vacuums at the same time it mops and scrubs, hardwood floors end up slightly moist but not wet, so they dry up within minutes.
The machine uses two removable containers: One for clean water + formula and other for dirty water, and a roller.
All of these are very easy to remove and wash.
Most of the pieces that come in contact with the floor and liquids are very simple to wash.
The roller can be removed and washed or can be left on the unit, which comes with a pedestal than can hold some water so the roller can remain moist.
The machine uses two removable containers: One for clean water + formula and other for dirty water, and a roller.
All of these are very easy to remove and wash.
Most of the pieces that come in contact with the floor and liquids are very simple to wash.
The roller can be removed and washed or can be left on the unit, which comes with a pedestal than can hold some water so the roller can remain moist.
While we vacuum the hardwood floors and small area rags regularly, the first time we used the CrossWave, it picked so much dirt the the water was solid brown, so this works a lot better than vacuuming alone.
Area rugs take a bit more effort and this does a great job. The main difference is that it needs to use twice the amount of water on a rug than on hardwood.
It comes with multi-surface and hardwood rollers. The main difference is that the multi-surface has soft bristles in addition to the cloth and the hardwood roller has a cloth surface (no bristles).
The manual recommends a mixture of mostly water and a small amount of a cleaning formula, also sold by Bissell for the CRossWave models. The formulas are for either hardwood or multi-surface.
Cleaning the machine is straightforward: Wash the dirty water container and occasionally wash the roller and cover.
The pedestal holds two additional rollers that can be left drying.
Overall, it's very simple to use, it's quick and simple to clean.
Area rugs take a bit more effort and this does a great job. The main difference is that it needs to use twice the amount of water on a rug than on hardwood.
It comes with multi-surface and hardwood rollers. The main difference is that the multi-surface has soft bristles in addition to the cloth and the hardwood roller has a cloth surface (no bristles).
The manual recommends a mixture of mostly water and a small amount of a cleaning formula, also sold by Bissell for the CRossWave models. The formulas are for either hardwood or multi-surface.
Cleaning the machine is straightforward: Wash the dirty water container and occasionally wash the roller and cover.
The pedestal holds two additional rollers that can be left drying.
Overall, it's very simple to use, it's quick and simple to clean.
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
+6points
10of 14voted this as helpful.
Tackle the biggest messes with this Bissell Crosswave all-in-one multi-surface cleaner. A dual-action roller scrubs and picks up debris at the same time to reduce the number of passes you need to make, and the convenient fingertip controls let you switch functions quickly and easily. This Bissell Crosswave all-in-one multi-surface cleaner has swivel steering for increased control.
Customer Rating
5
New level of clean
on September 25, 2016
Posted by: emiliosic
from Wakefield, MA
I'm thoroughly impressed how the Bissell CrossWave cleans hardwood and area rugs.
Back in the summer we had construction work done in the house. After two months of cleaning and vacuuming, thought that the hardwood floor was fairly clean. The first time that I used the bissell, with enough mix for a 'small area', applied it to two rooms that are mostly hardwood and a small area rug, the dirty water was like mud: Very dirty, with some fibers from the rug and dust it picked from the floor. Never imagined it would pick up so much dirt!
How it works:
Mix warm tap water and cleaning solution into one tank. This tank is lightweight and the cover does not leak. Tank has very clear labels on how to mix. Insert it in the machine. Then pick a roller (Comes with two for mixed surfaces that's slightly more rough and one for hardwood that's a soft cloth). On top of the rollers there's a dirty water tank and a washable filter.
That's it. Turn it on by selecting either hardwood or rug. The difference is that on rug, it dispenses twice the amount of solution.
Because it vacuums the water while it cleans, a hardwood floor dries in minutes and leaves no streaks. An area rug can remain slightly moist for a while though.
When done, remove the dirty water tank, rinse it, and optionally remove and rinse the roller. The cover for the roller comes off easily with little pressure, and there's a small handle to remove the roller. The simplest system I've used.
Most of the parts that come in contact with water can be taken off and rinsed.
It comes with a pedestal that can be left with water to help clean the roller that is installed while stored, although I prefer to rinse the rollers first. There's an attachment to keep two more rollers dying.
The machine is fairly light, not much different than other vacuums. It comes with a long power cable.
Comes with two bottles of concentrate solution. Each 8 oz bottle lasts for a few washes but it goes for about $ 8 a bottle, which is the only caveat. Not sure if some other solutions would work, but if it lasts for a few washes it's not cheap but reasonable.
Back in the summer we had construction work done in the house. After two months of cleaning and vacuuming, thought that the hardwood floor was fairly clean. The first time that I used the bissell, with enough mix for a 'small area', applied it to two rooms that are mostly hardwood and a small area rug, the dirty water was like mud: Very dirty, with some fibers from the rug and dust it picked from the floor. Never imagined it would pick up so much dirt!
How it works:
Mix warm tap water and cleaning solution into one tank. This tank is lightweight and the cover does not leak. Tank has very clear labels on how to mix. Insert it in the machine. Then pick a roller (Comes with two for mixed surfaces that's slightly more rough and one for hardwood that's a soft cloth). On top of the rollers there's a dirty water tank and a washable filter.
That's it. Turn it on by selecting either hardwood or rug. The difference is that on rug, it dispenses twice the amount of solution.
Because it vacuums the water while it cleans, a hardwood floor dries in minutes and leaves no streaks. An area rug can remain slightly moist for a while though.
When done, remove the dirty water tank, rinse it, and optionally remove and rinse the roller. The cover for the roller comes off easily with little pressure, and there's a small handle to remove the roller. The simplest system I've used.
Most of the parts that come in contact with water can be taken off and rinsed.
It comes with a pedestal that can be left with water to help clean the roller that is installed while stored, although I prefer to rinse the rollers first. There's an attachment to keep two more rollers dying.
The machine is fairly light, not much different than other vacuums. It comes with a long power cable.
Comes with two bottles of concentrate solution. Each 8 oz bottle lasts for a few washes but it goes for about $ 8 a bottle, which is the only caveat. Not sure if some other solutions would work, but if it lasts for a few washes it's not cheap but reasonable.
My Best Buy number: 0784609086
I would recommend this to a friend!
Share this review:
0points
0of 0voted this as helpful.
emiliosic's Review Comments
emiliosic has not submitted comments on any reviews.
emiliosic's Questions
emiliosic has not submitted any questions.
Work through the day with this Dell laptop. It includes an Intel Core i7 processor and 12GB of RAM so that tasks are accomplished quickly and easily, and a 2TB hard drive lets you store all your data even when you have no Internet connection. A powerful 42Wh battery keeps this Dell laptop working throughout the day.
It doesn't say if there's a headphone jack, is there? I don't suppose u can get it cusromized in silver, maybe a 4k display, or that rainbow backlit keyboard gaming laptops have?
Yes, it has a headphone jack, which also supports mics, like mobile phones. There are no color nor display options
7 years ago
by
emiliosic
Epson WorkForce WF-3620 All-In-One Printer: Create lasting memories with this all-in-one printer, which allows you to produce borderless photos in the comfort of your home. You can also print, copy, scan and fax important documents. Just connect your computer or mobile device to the printer via built-in Wi-Fi.
I am trying to remove the memory on my workforce 3640 as I am giving it away. How do I do that?
Remove memory cards if any on the side of the printer, and from its screen do a factory reset:
Press Home -> select Setup -> System Administration -> Restore Default Settings -> Clear All Data and Settings -> Select Yes
Press Home -> select Setup -> System Administration -> Restore Default Settings -> Clear All Data and Settings -> Select Yes
7 years, 2 months ago
by
emiliosic
Epson WorkForce WF-3620 All-In-One Printer: Create lasting memories with this all-in-one printer, which allows you to produce borderless photos in the comfort of your home. You can also print, copy, scan and fax important documents. Just connect your computer or mobile device to the printer via built-in Wi-Fi.
Will this printer feed A6 paper size (4.1" x 5.8") from main tray?
It doesn't specifically mention A6 (postcards) but it specifically mentions that 4 × 6 inches (102 × 152 mm), 5 × 7 inches (127 × 178 mm) photo papers can be loaded on the cassette
7 years, 2 months ago
by
emiliosic
Epson WorkForce WF-3620 All-In-One Printer: Create lasting memories with this all-in-one printer, which allows you to produce borderless photos in the comfort of your home. You can also print, copy, scan and fax important documents. Just connect your computer or mobile device to the printer via built-in Wi-Fi.
Can I print from my IPAD
Yes, it supports AirPrint. It should just work if the iPad is on the same network.
7 years, 2 months ago
by
emiliosic
Epson WorkForce WF-3620 All-In-One Printer: Create lasting memories with this all-in-one printer, which allows you to produce borderless photos in the comfort of your home. You can also print, copy, scan and fax important documents. Just connect your computer or mobile device to the printer via built-in Wi-Fi.
I'm upgrading from a Epson Artisan 835. Can I print directly onto a CD or DVD with the WF-3620? Which Printer would you recommend?
Epson WorkForce WF-3620 All-In-One Printer: Create lasting memories with this all-in-one printer, which allows you to produce borderless photos in the comfort of your home. You can also print, copy, scan and fax important documents. Just connect your computer or mobile device to the printer via built-in Wi-Fi.
is wf-3620 cartridge free?, how much would it cost me in kenya shillings?, and does it operate in all the required printing colours?
It uses one black ink and 3 color ink cartridges. It uses cartridges model Epson-252 or Epson-252XL.
There are other epson printers that don't use cartridges, but are initially more expensive. This one uses cartridges, and it's intended for low-volume applications.
There are other epson printers that don't use cartridges, but are initially more expensive. This one uses cartridges, and it's intended for low-volume applications.
7 years, 2 months ago
by
emiliosic
Clean your carpets efficiently with this iRobot Roomba vacuum. It lets you set a schedule for automated vacuuming, and the sensors help it navigate under furniture and around objects on the floor for a more thorough cleaning job. This iRobot Roomba vacuum has internal brushes, agitators and suction to handle debris and pet hair.
Does anyone who owns this model find that it is sort of loud?? The part that is the loudest is not the vacuum part but the part that makes it move I guess. Just wondering if anyone else found it loud or is there something wrong with mine?
Yes, I think it's a bit loud, but the point is to trust the machine and let it work while you're away or elsewhere in the house
7 years, 3 months ago
by
emiliosic
Listen to music hands-free with this LG wireless headset. It lets you answer or ignore a call with voice commands, and the wireless earbuds charge when they're resting inside the neckband, ensuring they're ready for use. The neckband of this LG wireless headset provides vibration alerts for incoming calls and texts, so you'll never miss a message.
How do I pair this thing?
It goes into pairing mode right away when nothing else is connected to them, Otherwise,, hold the button on the left earpiece (the one with the red label) for five seconds and will go into pairing mode
7 years, 5 months ago
by
emiliosic
Listen to music hands-free with this LG wireless headset. It lets you answer or ignore a call with voice commands, and the wireless earbuds charge when they're resting inside the neckband, ensuring they're ready for use. The neckband of this LG wireless headset provides vibration alerts for incoming calls and texts, so you'll never miss a message.
Does the tone free have a pass through audio feature? (Hear outside noise around you even though the ear buds are in your ear.)
No, but keep in mind it's not a noise-cancelling headphones, so can still hear some noises while wearing them.
7 years, 5 months ago
by
emiliosic
Listen to music hands-free with this LG wireless headset. It lets you answer or ignore a call with voice commands, and the wireless earbuds charge when they're resting inside the neckband, ensuring they're ready for use. The neckband of this LG wireless headset provides vibration alerts for incoming calls and texts, so you'll never miss a message.
Can I answer the phone with the earbud only, with the neckpiece?
Yes, only the left earpiece is necessary for phone calls. The neckband serves as a charging station and vibrates on incoming calls but is not required. You can get the optional charging cradle instead of the neckband.
Products from my answer
LG - Tone Free™ Charging Cradle - Blue
(1)7 years, 5 months ago
by
emiliosic