old models
IdL91 I can't set clock. How do you set clock?
Setting the Clock
1. Press and hold the Time Set Button located on the back of the unit for 2
seconds until the clock display flashes and a beep sounds.
2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid
setting). Make sure you set the correct AM/PM time. The AM and PM indicators
appear to the left of the display.
3. To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display,
press the Alarm or Alarm Button while the display is flashing during time setting.
4. Press the Time Set Button. The year will flash on the display.
5. Press the – or + Buttons to adjust the clock to the current.
6. Press the Time Set Button. The date will flash on the display.
7. Press the – or + Buttons to adjust the clock to the date.
8. Press the Time Set Button to confirm and exit clock setting mode. 2 beeps will confirm clock setting
is complete.
Setting and Using the Alarms
This unit features dual alarms which can be set to different times and alarm sources. Each is set in the
same way. Instructions are given as “Alarm Button”; use Alarm 1 Button or Alarm 2 Button to set
respective alarms. Alarm will sound for 1 hour until reset.
Note: Each step must be completed while display is flashing or step will time-out with any changes
saved.
1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash. A
beep sounds.
2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time.
3. Press the Alarm Button to confirm the alarm time setting. The wake-to source will flash.
Setting and Using the Alarm (Continued)
4. Press the – or + Buttons to select the desired wake to alarm source:
Bluetooth, radio or tone. The selected wake-up source will flash in the lower
part of the display.
Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no
device is detected, the alarm will default to Tone.
Wake to Radio: Press the Alarm Button to confirm. Press the Presets Button to select an FM preset
to wake to, or press the – or + Buttons to tune in a desired wake to station.
If FM antenna is missing, the alarm will default to Tone.
Wake to Tone: Press the Alarm Button to confirm. Press the – or + Buttons as needed to listen to
and to select one of the four built-in wake-to tones (1 - 4). I
5. Press the Alarm Button to confirm the alarm source. The volume display will flash.
6. Press the – or + Buttons to adjust the alarm volume. Note that the alarm volume setting is stored
separately from other volume settings.
7. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm
alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.
8. When alarm is sounding, press the Power Button or Alarm 1 or Alarm 2 Button to silence alarm
and reset it come on the next day at the same time (unless settings are changed).
Previewing the Alarm and Turning the Alarm On/Off
1. Press and release the Alarm Button to view the current alarm time.
2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the
alarm icon and a beep.
Hope that helps Teresa
8 years, 7 months ago
by
Teresa
Setting the iHome - Bluetooth Stereo Du