Customer Reviews for Hotpoint - 6.2 Cu. Ft. Electric Dryer with Auto Dry - White
Customer Rating
1
Hate it. Awful quality
on September 19, 2026
Posted by: kalmerOne
from West Linn, Oregon
No low heat. Over dries my clothes. Awful end of cycle buzzer that you can't turn off. Broke after 3 months of use
Response from manufacturerBy Adrian, Haier_Appliances, September 21, 2026
We would like to assist you with this dryer. This dryer includes a Medium and No Heat option for the temperature setting to ensure clothing does not get overdried. The end-of-cycle sound on your dryer cannot have the volume reduced or disabled. We will pass your feedback on this signal along to our product team for review. We recommend scheduling service with our Bodewell technicians to get this dryer properly assessed. You can schedule an appointment with a Bodewell technician by calling 1-833-4BODEWELL or schedule online at https://www.geappliances.com/ge/service-and-support/service.htm.
I bought this April 28th and already won’t start when push the start button
No, I would not recommend this to a friend.
Response from manufacturerBy Don, Haier_Appliances, September 14, 2026
We see that you've recently been in contact with a member of our Bodewell Service Team. We're confident our Bodewell technician will be able to assist.
So I bought this yesterday and when I got it, it had no power cord to it and it doesn’t even have a light inside. That’s weird.
Response from manufacturerBy Jonathon, Haier_Appliances, September 8, 2026
This unit does not include a light or bulb inside the basket. Most electric dryers also do not come with a power cord included. This helps ensure that they comply with all state and local wiring codes. To ensure the performance and safety of the dryer, we do not recommend reusing the existing power cord from the previous dryer. You can view more information in our article here: https://products.geappliances.com/appliance/gea-support-search-content?contentId=16663.
Bought this a month ago take 2 to 3 cycles to dry comforters.not happy at all
Response from manufacturerBy Dianna, Haier, August 24, 2026
We want to help with the drying performance of your dryer. Drying times will vary depending on the type of heat used (gas versus electric), the size of the load, the type of fabric (cottons hold more water than synthetics), the wetness of the clothes, and the condition of the exhaust ventilation. Large, heavy fabrics contain more moisture and take longer to dry. Make sure you are separating large, heavy fabrics into smaller loads to speed drying time. We also recommend using a solid metal vent pipe that is 4 inches in diameter for optimal operation. Four-inch-diameter flexible metal venting may also be used, but it can increase drying times. You will also want to check to make sure there are no obstructions in the ductwork and that you are also removing and clean the lint filter after each use. We have an article on our website with additional tips at the following link: https://products.geappliances.com/appliance/gea-support-search-content?contentId=18058&_gl=1*1.
Bought th I s dryer few months ago. It doesn't dry well no matter the size of the load I have to run at least twice sometimes more to get the load dry.
Response from manufacturerBy Dianna, Haier, August 24, 2026
We want to help with the drying performance of your dryer. Drying times will vary depending on the type of heat used, gas versus electric, the size of the load, the type of fabric, cottons hold more water than synthetics, the wetness of the clothes, and the condition of the exhaust ventilation. Using the proper venting material and ensuring that the vent ductwork is the proper length are very important to the operation of a dryer. We recommend using a solid metal vent pipe that is 4 inches in diameter for optimal operation. Four-inch-diameter flexible metal venting may also be used, but it can increase drying times. Also, check to make sure there are no obstructions in the ductwork. You will also want to make sure to remove and clean the lint filter after each use. We have an article on our website with additional tips at the following link: https://products.geappliances.com/appliance/gea-support-search-content?contentId=18058&_gl=1*.
Basic! I was looking to get something less expensive so I went with this one because it’s so basic. It has nothing digital so there’s really not much that can break on the control panel area. The only thing my last dryer had that I miss is the last 10 minutes would go into a wrinkle free cool down cycle, but this just goes full blast hot right until the end! But if you’re looking for something basic without anything digital that will break this is the one you want! And it was cheaper here than at the other big box stores