Performs as advertised. Low noise, low vibration. I've 'chipped' ten heaping wheel barrow loads of fallen twigs and small branches of ash and sycamore. We've had a lot of wind this spring! No jams, no issues. New footpaths!
Written by a customer while visiting snowjoe.com
Customer Rating
5
Great Product
on July 23, 2020
Posted by: Snow Joe Fan
from Manchester, NH
The little chipper that could. We have over 40 hours of use with this chipper and NO issues. Still the original cutting blade. We defiantly push this chipper to the limit and it has not disappointed. I constantly run 1 1/2"+ branches through this chipper.
I’ve been using the chipper to clean up branches in the yard. I’ve used it continuously for one to two hours each time. Being a guy, I wanted to see if I could load it up with too much. You can. But, if used within its limits, it will go and go and go! I am very happy with it so far and can recommend this chipper for yard work.
Written by a customer while visiting snowjoe.com
Customer Rating
5
Good product for backyard gardener.
on May 29, 2021
Posted by: Jolla
I own this Shredder for 3 years and only repair I did to it was to sharpen the cutter wheel. It does what it advertised. I strongly recommend this product to anyone for this price. I don't hasitate to buy another one if I needed to.
Written by a customer while visiting snowjoe.com
Customer Rating
5
Great product, performed better than expected.
on March 31, 2019
Posted by: Bill E
from Greenville SC
The unit performed really well, and this project required 2+ hours at a stretch to get the job done. I chipped mainly Crape Myrtle trimmings and you can see by the photos the chips/mulch came out pretty well. I ran the chunkier bits back through which reduced them further. Before I began I wanted to see how the mechanism functioned, to give me a sense of limitations (photo included for that purpose). Rather than use the small collection bag, I sat the unit in an industrial sand bag so I could keep chipping. I did use ear and eye protection, as well as gloves. Best lengths will be 10-18". One batch I had cut too small. This batch was not destined for this chipper and had difficulty getting into the teeth, this needed coaxing but did get chipped. At the end of the job I opened the unit again and noticed lots of fine material had collected inside the housing. I vacuumed, and used a blower to clean it. I also scrubbed the blade to remove residue build up. Great product, performed better than expected.
Written by a customer while visiting snowjoe.com
Customer Rating
5
Really amazed
on August 23, 2019
Posted by: Charlies 1 Dad
from Maple Ridge B.C. Canada
I tried out today my CJ603E chipper, this baby has power chipping,there was no effort for this machine it just kept grinding up the branches. Some were just able to go through the input opening but this guy just chewed them up and wanted more. I have another chipper, made in Germany and at more then double the price of Sun Joe, jammed up more times then working times and with smaller branches. I can not give Sun Joe enough praise three times the chipper at less then one-half the price. I cleaned up a large pile of Evergreen branches and not once did the Sun Joe jam or quit.
Written by a customer while visiting snowjoe.com
Customer Rating
4
Very pleased with CJ603E
on March 11, 2020
Posted by: Anton Anonomus
from Hanover Ma
Works well, heavier to move than I thought. Somewhat slow and a bit fussy about the size of branches that will, but once you get the hang of it everything is fine All assembly tools included and instructions clear, but better off to use a ratchet wrench. Parts on axels already attached and needed to be removed. This is a good because you know what attaches to what and there are no missing parts. The collection bag fills quickly so somewhat useless. The bag is however perfect to store protective wear (goggles and ear protection), extension cord, and paddles. I already have battery powered blower (snow and leaf) and chain saw. As soon as my lawnmower dies, I will replace it with one from SunJoe.
good product and does a good job as what it promoted. I have used other wood chipper but I am very happy with this CJ603E. By adjusting the blade adjustment knob to chip 1.75 inch dia. stem will go through no problem. It is a good buy. I recommend this wood chipper.