Customer reviews from gladiatorgarageworks.com
Gladiator - Full-Door Wall GearBox - Silver Tread
Average customer rating
4.7
(119 Reviews)
Rating breakdown 119 reviews
5 Stars
92
4 Stars
20
3 Stars
3
2 Stars
2
1 Star
2
94%of customers recommend this product.
(
98 out of
104)
Customer Reviews for Gladiator - Full-Door Wall GearBox - Silver Tread
Customer Rating
5
Another fantastic (and beautiful)Gladiator product
on March 11, 2019
Posted by: Pat123
from New Jersey, NJ
Gender:Male
I am really impressed by this line of products. The assembly is very quick and easy, if you have a hex head set for your power drill you can crank this out in 15-20 minutes. My first one took 30, the next two took about 10-15. They are very sturdy and well built. The doors aren't absurdly shiny, they're more of a satin finish which is perfect for me as they more closely match the stainless steel fridge in my garage. If you use the track system, getting them on the wall is a breeze too. I had the tracks on and these hung up in less than an hour. No need to level each one, just make sure the tracks are aligned. I'm very happy with these.
I would recommend this to a friend!
Response from gladiatorgarageworks.comBy Gladiator, Gladiator Care Team, April 8, 2019
So cool to hear that! Thanks for the shout out
Written by a customer while visiting gladiatorgarageworks.com
Customer Rating
5
Good design
on October 30, 2019
Posted by: JNJK
from Philadelphia, PA
Gender:Male
[This review was collected as part of a promotion.] I received this recently and was very pleased with the ease of assembly and installation. I am using it in my patio enclosure room to store coffee and tea for my Keurig. I am very satisfied with the number of shelves and the ability to adjust their height. Also, the doors open with ease and close securely.
I would recommend this to a friend!
Written by a customer while visiting gladiatorgarageworks.com
Customer Rating
4
Great color scheme
on October 30, 2019
Posted by: arcticcat2006
from Abbotsford, WI
Gender:Male
[This review was collected as part of a promotion.] The gearbox looks awesome. I love the magnetic doors. I think the best feature is the hole in the bottom shelf to allow cords or in my case battery chargers to be plugged into. It looks so clean and makes my garage look great. I will buy more of these.
I would recommend this to a friend!
Written by a customer while visiting gladiatorgarageworks.com
Customer Rating
5
Great looking cabinet, and super easy to assemble!
on October 31, 2019
Posted by: Jersey Rob
from Texas
Gender:Male
[This review was collected as part of a promotion.] I just received this product and assembled it as soon as I had free time. The ease of assembly can’t get any easier. Everything is labeled and instructions are clear. The look of the diamond plate really stands out and is a perfect fit in the garage.
The finish is really durable. I had a bent corner and a separate piece that was broken through the shipping process. I repaired the best I could, and it never cracked or chipped the paint.
A new feature they added, was a knockout plug in the bottom shelf for running an electric cord though it. It allows you to add a light or small radio in it.
Overall, I’m very pleased with this product and will be adding more cabinets in the future.
A new feature they added, was a knockout plug in the bottom shelf for running an electric cord though it. It allows you to add a light or small radio in it.
Overall, I’m very pleased with this product and will be adding more cabinets in the future.
I would recommend this to a friend!
Written by a customer while visiting gladiatorgarageworks.com
Customer Rating
4
Easy to assemble
on November 1, 2019
Posted by: 6T9 337
from Denver, CO
Gender:Male
[This review was collected as part of a promotion.] Giving it a 4 star instead of 5 due to minor shipping damage, and directions could include info about tab placement during assembly If I could give it 4.5 stars, I would. I received this cabinet to eliminate some clutter in my tool shed. It was fairly easy to assemble, it took me about 30 mins. One corner was bent due to shipping, but was easily straightened with some pliers. I did not pay close enough attention to all of the tabs when I started assembly, so I had to partially disassemble so I could get all the tabs in the correct slots. Glad I did, I think they help make it sturdy, and keep everything nice and square. It also has pre-punched holes in the back to attach directly to the wall studs. Two sets provided for 16" OC and 24" OC - nice touch.
I would recommend this to a friend!
Written by a customer while visiting gladiatorgarageworks.com
Customer Rating
5
Great Wall Gearbox!
on November 2, 2019
Posted by: Rob H
from Mesa, AZ
Gender:Male
[This review was collected as part of a promotion.] I got this cabinet to store some extra reloading equipment. Ive been a Gladiator customer before so the choice was easy.
Product Packaging:
Product was well packed in a box that shows the product. It was fully encased by styrofoam so all pieces were well protected. Only a few minor dings on the thin gauged metal corners that were easily bent straight.
Product was well packed in a box that shows the product. It was fully encased by styrofoam so all pieces were well protected. Only a few minor dings on the thin gauged metal corners that were easily bent straight.
Product Assembly:
Assembling the wall gearbox was very easy and straight forward. It came with all necessary hardware and instructions. Only tools needed were a philips screwdriver and a allen wrench which is included with the hardware. It took me about ten minutes to assemble.
Assembling the wall gearbox was very easy and straight forward. It came with all necessary hardware and instructions. Only tools needed were a philips screwdriver and a allen wrench which is included with the hardware. It took me about ten minutes to assemble.
Product Install:
Hanging the wall gearbox was also simple for one person. I just removed the doors and shelves to lighten the load a little bit. I opted not to use the gear track wall hanger which is fine because it comes pre drilled with four 3/8" holes for mounting. Each set of holes is specifically spaced to line up with wall studs either 16" on center or 24" on center. My application I was able to use all 4 holes to hit a wall stud with a 3/8" lag bolt. It is definitely strong and will provide suitable strength for my storage needs.
Hanging the wall gearbox was also simple for one person. I just removed the doors and shelves to lighten the load a little bit. I opted not to use the gear track wall hanger which is fine because it comes pre drilled with four 3/8" holes for mounting. Each set of holes is specifically spaced to line up with wall studs either 16" on center or 24" on center. My application I was able to use all 4 holes to hit a wall stud with a 3/8" lag bolt. It is definitely strong and will provide suitable strength for my storage needs.
To summarize this product is well worth the money if you are on the fence of purchasing one. The wall gearbox is well designed with modular shelving and ease of assembly to provide a strong storage solution. Quality is top notch and I will not hesitate to get more!
Written by a customer while visiting gladiatorgarageworks.com
Customer Rating
5
Perfect size, easy to assemble.
on November 2, 2019
Posted by: RLSJ
from Arlington, VA
Gender:Male
[This review was collected as part of a promotion.] Just received my new cabinet and it fit perfectly in the space. It went together easily with just a screwdriver and the included allen wrench. Quality is very nice. I worried that it would not be sturdy if I had to screw it together but it is very sturdy. The shelves are adjustable which was helpful when a box I wanted to put inside was just a little too tall to fit on the shelf. I was able to move the top shelf up one slot so the box fit.
I would recommend this to a friend!
Written by a customer while visiting gladiatorgarageworks.com
Customer Rating
3
Practical Gladiator Gearbox
on November 3, 2019
Posted by: GladiatorDIYer
from Evans, GA
Gender:Male
[This review was collected as part of a promotion.] Gladiator Ready-to-Assemble (RTA) Gearbox is a cheaper alternative to their Premier Series. The RTA gearbox is made of thinner gauge sheet metal and assembled with screws.
Packaging and Unboxing
Package arrived with minor damage to box; but, no damage resulted during delivery. Minor cosmetic dimples/creases in the doors and bent corner in side panel could have been avoided with better packaging. Bottom of box states to "cut the carton top along specified cut lines"; however, instructions were not seen until box was opened by other means.
Package arrived with minor damage to box; but, no damage resulted during delivery. Minor cosmetic dimples/creases in the doors and bent corner in side panel could have been avoided with better packaging. Bottom of box states to "cut the carton top along specified cut lines"; however, instructions were not seen until box was opened by other means.
Assembly and Hanging Cabinet
Cosmetic damages were fixed by straightening the thin sheet metal by hand and hammering flat with a piece of wood (to protect metal and provide flat surface) and hammer. Assembly was easy and took about 45 minutes. Instructions were easy to follow; however, it could have been simplified by attaching the wall bracket to the back panel before attaching to the gearbox.
Cosmetic damages were fixed by straightening the thin sheet metal by hand and hammering flat with a piece of wood (to protect metal and provide flat surface) and hammer. Assembly was easy and took about 45 minutes. Instructions were easy to follow; however, it could have been simplified by attaching the wall bracket to the back panel before attaching to the gearbox.
I would recommend this to a friend!
Written by a customer while visiting gladiatorgarageworks.com