Used this cable as a communication bridge from my SMDR port on our Nortel Phone equipment to our Network Server for phone auditing/report generating capabilities. The cable works as advertised.
I had an issue with the DB25-side securing screws - they prevented me from securing the DB25 side down into the SMDR port so I used a hacksaw and sawed them off to make the interface bezel flush and allow it to seat properly.
This is in no-way a negative aspect of the product as I am using this cable to fulfill a purpose slightly outside of its original scope.
Pros: Reliable, Durable construction
I would recommend this to a friend!
Written by a customer while visiting cablestogo.com
I purchased this to allow connection of a RS232 device to a USB port on my computer. The software did not work and the connection did not link. I am not sure if there is a hardware issue as well as this type of device usually has an onboard chip for configuration. Regardless, the cable combo did not work.
Pros: Great Advertising
Cons: Unreliable, Doesn't Work
No, I would not recommend this to a friend.
Written by a customer while visiting cablestogo.com
I bought this cable to go between a Kantronics 3 Plus TNC and my laptop. The D25 end of the cable has lugs that have to be wrestled off before it will fit on the TNC. It was not easy. It would be helpful if the lugs were made to be removed more easily.
Pros: Consistent Performance, Good Length
Cons: Lugs on D25 end
I would recommend this to a friend!
Written by a customer while visiting cablestogo.com
Customer Rating
4
6ft USB Serial DB25 Adapter Cable
on March 24, 2013
Posted by: LPKF user
from IL
I upgraded my computer to one with no serial ports. I was getting FIFO errors although FIFO was turned off. Downloaded the driver in support dated 3-5-13 the problem was fixed.
Pros: Easy To Set Up
Cons: Driver On Cd No Good Down
I would recommend this to a friend!
Written by a customer while visiting cablestogo.com
Needed this adapter cable to connect my Laptop running W8 to a Kantronics KPC-3 Plus TNC. Since the adapter cable D25 Connector comes with lugs, had to remove the lugs on the back of the TNC before I could install.
Pros: Easy To Install On W8
Cons: Lugs On D25 Connector
I would recommend this to a friend!
Written by a customer while visiting cablestogo.com
A perfect interface between my IC-786 Amateur Radio Transceiver, the IC-CV17 level converter, and my PC. Installs easily and works the first time. I highly recommend for this purpose
Pros: Reliable, Rugged quality, Easy To Set Up
I would recommend this to a friend!
Written by a customer while visiting cablestogo.com
No cons. Wish list would include having software configure to given com ports, instead of through Windows (Admin permission problem on windows vs. software setups.) Still product did exactly as it was advertised, and my small COM port problem is fixed!
Pros: Worked exactly per claim, Easy To Set Up
I would recommend this to a friend!
Written by a customer while visiting cablestogo.com