Customer Reviews for Maytag - 3.5 Cu. Ft. High Efficiency Top Load Washer with Dual Action Agitator - White
Customer Rating
1
Does not clean well
on October 16, 2026
Posted by: ValCl
I have owned this washing machine for approx 1yr now and do not recommend. It does not remove dirt or stains even if the load is ran twice and regardless of what detergent I have used.
No, I would not recommend this to a friend.
Response from maytag.comBy Maytag Social Care Team, Consumer Care, October 19, 2026
Thank you for bringing this to our attention. We regret that you are having these concerns with your Washer. If your clothes are not cleaning properly with your Maytag® Washer, please check the following key troubleshooting areas:
Initial Run: If the washer was recently installed, run an empty "Quick Wash" cycle with HE detergent before the first load to ensure the drum is clean. Water Hoses: Verify the hot and cold water inlet hoses are connected to the correct household supply and that both water faucets are fully turned on for proper fill. 2. Cycle and Settings Water Temperature: Use the warmest temperature safe for the fabric, as recommended by the garment care label. Warmer temperatures (hot or warm) generally clean better. Cycle Selection: Choose the appropriate cycle for your load's fabric type and soil level. Soil Level: Adjust the Soil Level (wash time) setting for heavily soiled items (Extra Heavy or Extra Power) or lightly soiled items (Light Soil). Spin Speed: Faster spin speeds reduce drying time but can increase wrinkling. Slower speeds reduce wrinkling but may leave clothes damper. 3. Detergent and Additives Detergent Type: Use only HE (High-Efficiency) detergent. Detergent Amount: Always measure detergent. Using non-HE detergent or too much detergent can cause excessive suds, leading to poor cleaning and very wet loads. Follow the manufacturer's dosage based on soil level and load size. Fabric Softener: Measure and dilute fabric softener, adding it only to the rinse portion of the cycle to avoid staining or discoloration. Liquid Chlorine Bleach: Measure carefully and follow directions. Undiluted bleach will damage fabric. 4. Loading and Routine Care Loading: Load items in loose heaps evenly around the washplate so they can move freely. Reduce load size if necessary. Sorting: Separate dark items from lights and whites to prevent dye transfer. Routine Cleaning: Run a Clean Washer Cycle (ideally monthly with an appliance cleaner like affresh®) to re-calibrate the water levels and remove detergent and softener build-up. If you are still having concerns with the Washer after reviewing the information, please feel free to use any of the options below: Facebook: https://www.facebook.com/maytag Instagram: https://www.instagram.com/maytag/ Live Chat: https://www.maytag.com/services/contact-us.html (Tuesday - Friday, 8 AM - 6 PM ET) USA Customer Service: 1-800-344-1274 (Monday - Friday, 8 AM - 6 PM ET) When reaching out on Social Media (Facebook or Instagram), please reference the case number #25322026, and a restatement of your issue. We’re looking forward to hearing from you. Marie Q
Just got this machine less than 10 days ago. Prior to buying I had tried out my sister in law's maytag washer (not the same model mind you, but bought 2-3years ago) to see how things worked and different functions. I figured this one would work similarly. NOT! Once you set the different options, ie water level, cycle type, etc and then start the machine you CANNOT make any changes. Pressing PAUSE, making changes and then pressing start will not make a change. It stays the same. I have been told by them that if you want to make a change, you have to CANCEL the load, drain the water and START OVER! That is ABSOLUTELY RIDICULOUS! Do they think people don't make mistakes anymore? Why make the customer drain out all the water (unecological and wasteful) and their soap (financially wasteful) because they thought they had a medium load but really was a large load or oops didn't change cycle from previous normal to a delicate. This is ABSOLUTELY A STUPID way to design the machine. VERY DISPLEASED>
No, I would not recommend this to a friend.
Response from maytag.comBy Maytag Social Team, Consumer Care, July 17, 2026
We are truly sorry to hear that your washer has not met your expectations. We understand how frustrating it is when an appliance doesn't perform as it should, and we want to help resolve this for you. If you have any questions or concerns, please feel free to use any of the options below: Facebook: https://www.facebook.com/maytag Instagram: https://www.instagram.com/maytag/ Live Chat: https://www.maytag.com/services/contact-us.html (Tuesday - Friday, 8 AM - 6 PM ET) USA Customer Service: 1-800-344-1274 (Monday - Friday, 8 AM - 6 PM ET) When reaching out on Social Media (Facebook or Instagram), please reference the case number #987222. We’re looking forward to hearing from you. Marie Q
Purchased this washer just over 3 years ago with hopes of having a quality built lasting washer. Washer agitator splines and transmission gave out recently. Fortunately still under warranty with the 5 year parts and labor coverage. Warranty work has been slow and getting parts is taking longer than expected from the 3rd party service center. I do not recommend this washer and will be looking at a different brand at a later date. This is a very common failure for this machine (tub hub and spline failures).
No, I would not recommend this to a friend.
Response from maytag.comBy Maytag Social Team, Consumer Care, July 1, 2026
Thank you for bringing this to our attention. We regret that you are having these concerns with the agitator and transmission needing replaced in your Maytag® Washer. We value all of our customers, and we would like the opportunity to look into this further for you. Please feel free to use any of the options below: Facebook: https://www.facebook.com/maytag Instagram: https://www.instagram.com/maytag/ Live Chat: https://www.maytag.com/services/contact-us.html (Tuesday - Friday, 8 AM - 6 PM ET) USA Customer Service: 1-800-344-1274 (Monday - Friday, 8 AM - 6 PM ET) When reaching out on Social Media (Facebook or Instagram), please reference the case number # 982408. We’re looking forward to hearing from you. Marie Q
Decent amount of water, 30 minutes cycle wash. The only minus is spinning quality, clothes are coming out pretty wet, so I have to dry them twice. Next time I will try extra spin and compare.
Purchased washer & dryer 2 months ago from a local appliance dealer. I have owned Samsung, LG, and GE previously, and none lasted more than 4 years, (rust, electronic panel malfunctions.) Choice was between these and Speed Queen units: the wait time for Speed Queens was not acceptable. So far, so good. The wash cycle is very fast, and the clothes are clean. I wish the agitator was removable, but I now use mesh wash bags for anything delicate, or with fabric belts/strings/sashes. The washer will take a very lightweight king coverlet or quilt. The dryer works fine so far, good variety of settings. Note: The washer does not have an end of cycle audible signal. Additionally, these units are noisier than most, so if that is a concern, these may not work for you. Pleased with this purchase, but longevity…we shall see.
This washing machine worked well for me for about 16 months and then started getting stuck in the drain cycle and throwing a F3E1 error. I'm being told it needs a new control board now. There was a service bulletin for this issue but it ended in December 2025. Whirlpool is no longer covering control board replacements. I made a big mistake buying a Whirlpool/Maytag product.
No, I would not recommend this to a friend.
Response from maytag.comBy Consumer Care, April 6, 2026
Thank you for bringing this to our attention. We regret that you are having these concerns receiving an F3E1 error on your Washer. The F3 E1 alert indicates the washer cannot detect the water level, which may stem from a control unit or wiring issue. To resolve this, reset the washer by disconnecting it from power for 5 minutes. If you are still having concerns with the Washer after reviewing the information, please feel free to use any of the options below: Facebook: https://www.facebook.com/maytag Instagram: https://www.instagram.com/maytag/ Live Chat: https://www.maytag.com/services/contact-us.html (Tuesday - Friday, 8 AM - 6 PM ET) USA Customer Service: 1-800-344-1274 (Monday - Friday, 8 AM - 6 PM ET) When reaching out on Social Media (Facebook or Instagram), please reference the case number # 944803. We’re looking forward to hearing from you. Marie Q
First motherboard went before warranty so it got replaced. Second one went bad after warranty. Wife is so irritated I'm getting another machine. Doesn't matter how well built everything else is in your machine if your electronics are trash. Unhappy wife = unhappy life. Buying new machine $$$ = unhappy husband.
No, I would not recommend this to a friend.
Response from maytag.comBy Branded Team, Consumer Care, February 2, 2026
Thank you for bringing this to our attention. We regret that you are having these concerns with your Washer. We value all of our customers, and we would like the opportunity to look into this further for you. Please reach out to us directly at any of the options below: Facebook: https://tinyurl.com/Maytag-Facebook Instagram: https://tinyurl.com/Maytag-Corp-Instagram Live Chat: https://www.maytag.com/services/contact-us.html (Tuesday - Friday, 8 AM - 6 PM ET) USA Customer Service: 1-800-344-1274 (Monday - Friday, 8 AM - 6 PM ET) When reaching out on Social Media (Facebook or Instagram), please reference the case number #911868. We’re looking forward to hearing from you. Christy T
I have had my washer for one year, The repair person has been out here five times after replacing parts and issue still not resolved. The beginning of the spin cycle is extremely loud and makes an odd noise until it gets further into the spin cycle. Also reading other reviews that the clothes come out not wet at all, that is not my experience with this machine.
Response from maytag.comBy Branded Team, Consumer Care, January 9, 2026
Thank you for bringing this to our attention. We regret that you are having these concerns with your Washer. We value all of our customers, and we would like the opportunity to look into this further for you. Please reach out to us directly via Private Message on Facebook at https://www.facebook.com/maytag or Direct Message on Instagram at https://www.instagram.com/maytag/. When responding, please include your contact information and reference Case #897398 Let’s see what we can do for you! Christy T