Customer Reviews for Peak Design - Micro Clutch Hand Strap - Black
Customer Rating
2
Very uncomfortable with FujiFilm X-S20
on July 12, 2023
Posted by: Traveller
from Germany
I bought the L shaped variant for my new X-S20. the build quality and the materials of the grip are excellent. Sadly, I can't use the strap - it is way too uncomfortable. The attachment point on the FujiFilm is very close to the back of the camera, causing the strap to be in a very slanted position. If you grip with your fingers around the camera grip properly, the strap cuts between your middle and index finger. I becomes very uncomfortable almost immediately. I cannot recommend this strap for using with the X-S20 and the almost identical X-S10. That said, the strap might work much better with other camera body designs or if your hands are bigger than average sized.
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, PD Team, July 12, 2023
We're sorry to hear the micro clutch doesn't work with your camera body as expected! We tried hard to accommodate as many makes and models as possible but unfortunately, there are a few out there that just don't quite work. We'll update our compatibility chart accordingly and please reach out to our support team at info@peakdesign.com and we can assist with processing a return for you.
Works great on a Fujifilm X-E4. The I-plate fits great, does not add any bulk to the frame. With bigger hands and because of the small camera body I use only one finger thru the strap to get an ergonomic grip and best usage. Components seem very good quality and the tripod plate was a nice add-on.
I have little girly man hands, so my review is slightly biased, but maybe helpful to those with similar hands. So I slapped this sucker on shortly after receiving it this past weekend. I hadn't had my camera out in a few weeks, and my daughter and grandson were in town visiting. Both great opportunities to take it for a spin. We spent 90 minutes walking around a trampoline park taking approximately 150-200 photos. Totally comfortable with just the micro clutch keeping the camera secured to my hand. When I wasn't actively shooting, I could leave my hand relaxed with almost no concern for the cameras safety. For reference, I typically wrap a strap around my wrist/hand to achieve the same result, however, if I relax my hand the camera would fall. I am able to keep all four fingers inside the strap while mostly comfortably shooting, and controlling my Z6II. I had a slight red mark on my index finger post shoot, but nothing that concerned me or was uncomfortable. Overall I loved using this thing, and may simply keep the strap disconnected for the foreseeable future.
Summary: It works on the G5Xii, but it may not be comfortable. I had to tighten the strap as much as possible (to the length of the hand pad, hole #6) in order to be snug around my fingers. Because the eyelet is not at the top of this camera, there's significant distance between the middle finger in the strap and the index finger pressing the shutter, this is not comfortable (see photo 1). It's more comfortable to slide the last two fingers in the strap and leave the middle finger loose (see photos 2 and 3), but then the strap isn't snug and the camera would fall if you relaxed your grip. Photo 4 illustrates that you don't require much grip if you slide the middle and ring fingers in the strap; it's comfortable to carry, but not to shoot. For those interested, photo 5 shows how the I-Plate fits on the bottom of this camera. I'll keep experimenting, but I'm not ready yet to recommend this product for the G5Xii. I think the product value is very good, but perhaps it requires tweaking for some cameras.
Using OM system OM-1 with L-plate and hand holding Panasonic 100-400 lens. It feels great in hands and stabilized. You can charge the battery in camera on OM-1 but if you do want to change it then you need to unscrew the plate and take it off to access bottom of camera. I would suggest to use 3 fingers(you can tighten or loosen it easily) to be able to get through the strap to hold the camera steady and comfortable. Overall a very nice addition to the line up especially for mirrorless systems.
Using L plate with Sony A9. Challenging initially to get the fit right - do you insert 2 or 3 fingers? Three was more secure but uncomfortable because there is a hard knob under the top of the strap that pushes against and bruises index finger. Had to adjust for 2 fingers but does not feel secure unless strap was tightened much more but made it hard to move other fingers to operate camera. Would camera + lens hold if grip loosened? No with my gear (might be okay with lighter camera).
Integrated tool is amazing but means that base plate is thicker than it could be adding to weight. Hoping next version makes base plate thinner and lighter and there are no knobs under the strap that can push against any fingers.
No, I would not recommend this to a friend.
Response from Peak DesignBy CS, July 12, 2023
Thanks for the feedback here! The a9 has a rather large grip and is an example of a camera that is on the larger side of L-plate compatibility and may work better with Clutch. The a9 has a rather large grip. 2 or 3 fingers can be inserted, whatever is more comfortable. The hard knob you are referring to is the keeper stud. For such a small part, it needs to be metal because it's what securing the strap in place. In terms of adjustment, the strap should not be so tight that the keeper stud is being forced down into your hand.
If you feel that the Micro Clutch is not a great fit for your set up, please reach out to our support team at info@peakdesign.com and we can assist with processing a return for you.