Customer Reviews for Peak Design - Micro Clutch Hand Strap - Black
Customer Rating
4
Good design, works for Fujifilm X-T100
on July 15, 2023
Posted by: Kate
from Boston
I am using the Micro Clutch with the I-plate on my Fujifilm X-T100.
The I-plate fits the camera perfectly. I absolutely LOVE the design of the I-plate itself, the ARCA adapter, and the overall look and feel of the magnetic connections, integrated tool, etc. I hope that PD considers making this plate available independently (perhaps with an additional anchor loop or two on the sides?) as well as with the Micro Clutch, because it is loveley and is a great improvement on the plain anchor that comes with the Slide strap (namely, that I needed to find the hex wrench to remove it every time I wanted to access the battery/SD card compartment).
The Micro Clutch itself is great, though I had a few issues with installation and finding a configuration that minimized pressure points from the length adjustment pin. Overall, the grip feels pretty well made, secure and is definitely small enough to make my small hands feel secured to the camera, which was one worry of mine. Especially since it allows me to continue to use another strap/cuff, I think this will be very secure. The materials feel good and like they will last a long time, which is what I would expect from PD.
Installation was a bit fiddly, and was honestly a bit confusing. The hypalon strap is at first glance too large to fit into the slot on my camera, so I first installed it using the split ring. This works, though it cants the finger strap at a slight angle to the camera. If I was going to keep it installed like this, I might try and find a second tiny split ring to go between the included triangle split ring and the camera slot, so that the finger strap goes back to fully perpendicular to the camera body as intended. Using the split ring also let me install a PD Anchor side-by-side, which most closely mimics the strap options I had previously. Reading some of the responses here I see that it was intentionally designed to be a very tight fit, and does work to force the strap through the slot, but it's definitely neither clear that that is the intention at first glance, nor is it at all easy to do. Once you force it through, though, it does work pretty well and feels stable, and I hope it will wear okay even though compressed. I also tried the 'hack' suggested for another camera https://www.peakdesign.com/pages/faq?a=Which-Micro-Clutch-model-(L-plate-vs.-I-plate)-fits-my-camera---id--jptVfZVxSzSWIDOErEjmfA, using a PD Anchor instead of the split ring. This worked pretty well, and came with the advantange that you can use the anchor as normal, though it did change the length (obviously) and tension of the MicroClutch strap in a way that felt less comfortable to me.
The biggest problem I had is that the pin for adjusting the length goes all the way through both the hypalon strap and the leather hand strap to where your fingers are, so the stud presses directly into your finger. This is adjustable and I did eventually find a position/strap length where it is not immediately uncomfortable and seems, but it definitely took some trial-and-error and I have not yet tested it for very long periods. I think if the finger pad wasn't attached to the strap via the pin, there might be a bit more padding/better pressure distribution. I'm hoping that the configuration I found will be okay for at least moderate periods, especially when combined with another strap to give my fingers a break if necessary.
One thing to note is that it is not as amenable to gear hot-swapping as other PD products are, mainly due to the effort required to get the strap through the slot on the camera, though I expect that a lot of that is due to the limitations of the Micro size. The anchor attachment point on the bottom plate does help ameliorate this, since it's still easy to use the clutch in conjunction with another strap for extra security.
Overall, it's a nice piece of gear that I'm happy to add to my kit
I'm using the L-plate with Sony a7IV. My hands are on the smaller side and it works great when adjusted for 3-fingers inside the loop usage. I had a several hours shoot and it was super convenient, to the degree that I forgot it was there despite the convenience it provided for holding and controlling the camera one-handed as well as the added security.
Worth mentioning: * All the materials used are just great. * The anchor point on the Micro Clutch has a great position: when paired with a Slide strap the lens is pointing down and sits very comfortably in general. * If it doesn't fit well on the first attempt, try a few different configurations: 2/3 fingers, firm/loose fit. I found 3 fingers with a slightly looser fit to be the best for me.
One of the best products from PD so far. It solved a real problem in a unique way. It now feels odd to use the camera without it, that says a lot how good it is.
I didn't expect to want to work for Peak Design after buying the latest offering (yet another for my collection)! I had questions unrelated to the Micro Clutch when the KS campaign was still active. Pre-release customer service and engagement was amazing! Lmk who where to send my resume.
As far as the actual product is concerned, it's amazing! I'm trying to go on a travel diet, and this is perfect for the times when I'm low on bag capacity. It works as advertised and doesn't hurt my fingers. I'm using a Fuji XT-3, and the L-Plate works, but the I may have been a little better fit. It doesn't matter though b/c the integrated tool makes on-the-fly adjuststments (like getting to the battery door easier than giving my money away to PD. I'm not a big fan of neck and wrist sweat in the summer when using other PD products that keep me from paying repair bills…so, this is a great alternative on warmer days.
I bought the L-plate for Fujifilm X-H2S and the micro clutch is extremely uncomfortable. I cannot imagine using it. The straps cut into the skin between fingers. I guess the micro clutch may work only for small/light camera with a shutter release button on top plate. I don't have such camera to test. Well, if the camera is light, I probably don't need the micro clutch and I can easily stay with cuff which is much more flexible to attach/detach.
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, PD Team, July 13, 2023
We're sorry to hear the micro clutch doesn't work with your camera body as expected! We tried hard to accommodate as many makes and models as possible but unfortunately, there are a few out there that just don't quite work. We'll update our compatibility chart accordingly and please reach out to our support team at info@peakdesign.com and we can assist with processing a return for you.
I tried it at the SF flagship store on a Panasonic Lumix LX100 for about 5 minutes before I pledged on Kickstarter. Now that I have it, on this particular camera, I find it more comfortable to insert 3 fingers instead of 2 fingers into the strap. Otherwise, the pinky just hangs on the outside uncomfortably and not being able to help.
Info for others. The triangular split ring that came with the package is standard sized. My camera already has a split ring, so I just used that. I found the PD provided rubber protector for the split ring more difficult to work with than the protector that came with the camera. The split ring splitter/installer is a nice touch.
I purchased the L-plate to use with my Fujifilm X-S10 which at already has a fairly sizeable grip on it. Build quality as you'd expect is superb. This is a well thought out product that clearly took a lot of time and effort into the design process. Everything feels premium through and through. The installation process can take a bit of time, but this felt very secure on my camera once I got everything on properly. There's lots of adjustability in the strap to make this work with a variety of hand sizes.
Unfortunately for my particular set up, I didn't find this didn't add any additional feeling of security with my X-S10. I did find however that it had a tendency to restrict the movement of my index finger, making it feel a bit less natural to access the shutter button and other buttons on my camera. I wasn't a fan of having my pinky sort of hang out of the clutch as well, with the strap digging into the space between my pinky and ring finger. I overall felt less secure in my grip than when I didn't have the clutch on. I still find using the cuff, attached to my capture plate, to be the safest and least obtrusive way to add fall protection to my camera.
Overall I think if you're happy with the grip on your camera, this may mess with your grip mojo a bit and I'd recommend you just go with the cuff for that additional fall protection. On the other hand, I think the I-plate on cameras with minimal grip like the X100V, where you want to maintain that minimalist aesthetic and feel, would be excellent.
I would recommend this to a friend!
Response from Peak DesignBy CS, July 12, 2023
We're sorry to hear the micro clutch doesn't work with your camera body as expected! We tried hard to accommodate as many makes and models as possible but unfortunately, there are a few out there that just don't quite work. We'll update our compatibility chart accordingly and please reach out to our support team at info@peakdesign.com and we can assist with processing a return for you.
I like the idea of a lightweight way to keep my camera firmly in my hands, but this isn't it. I guess it depends a lot on cameras and hands, but using the Micro Clutch, my fingers are not in the same position as they are when I hold the camera. This twist of the hand pushes my thumb further to the left than is useful - to be able to access the exposure compensation wheel on the right - and feels awkward. Even though I have the Clutch tight, it still feels like I could drop the camera.
I'm using this on a Leica Q3, and there's a problem on the bottom. The screw, which you can loosen slightly to slide the bottom plate off, gets in the way of the SD card slot, so I have to take the screw out if I want to access the card. The way the screw tool is held magnetically in the plate is clever, but it's still a bit too much work.
Excellent design, as always from PD, and I can see this working with some hands and some cameras, but it doesn't work for me.
Response from Peak DesignBy CS, July 12, 2023
We're sorry to hear the micro clutch doesn't work with your camera body as expected! We tried hard to accommodate as many makes and models as possible but unfortunately, there are a few out there that just don't quite work. We'll update our compatibility chart accordingly and please reach out to our support team at info@peakdesign.com and we can assist with processing a return for you.
Here are some notes/thoughts from the design team on this particular use case:
The Leica Q3 is a brand new camera that has not been tested yet and was released after the MC design was complete. Unlike previous iterations, it looks like it has a separate SD card door that is very close to the tripod slot. The head of the adjustment screw (one or both) is likely too large to allow full opening of the SD card door. The door is also contoured around the tripod mount, which makes things even more problematic.