Customer Reviews for Peak Design - Micro Clutch Hand Strap - Black
Customer Rating
2
Great quality but not so design
on July 18, 2023
Posted by: щзе
First of all, the quality is very good. I like the way it mounts on the bottom of a camera. I can even put up with the difficult access to the battery. But the strap is a pain. Literally. 1. The old clutch dissipates the load all over my wrist. The micro clutch wants to break two fingers - my camera weighs about 600g + lens 300 to 1000g. 2. The Nikon z6 has a pretty deep grip. I can't hold the camera the recommended way.
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, July 25, 2023
We're sorry to hear the micro clutch doesn't work with your camera body as expected! We tried hard to accommodate as many makes and models as possible but unfortunately, there are a few out there that just don't quite work. We'll update our compatibility chart accordingly and please reach out to our support team at info@peakdesign.com and we can assist with processing a return for you.
My main use is for X-H2 and I wanted a clutch that its not so big to use. The Micro is the best for that application light small secure and versatile. I was afraid that due to its size could be deficult to use on X-H2 but its perfect
I was concerned that the L-Plate Micro Clutch would be too small for my camera, but saw it listed on the compatibility chart as compatible with the L-plate version, so went ahead and made the commitment on Kickstarter. It's not. It sticks out from the back of the camera and when positioned based on the instructions (centered) the grip space is way too small for two fingers and is way too tight for my index finger to reach the shutter release in any way that is comfortable at the loosest setting. In addition, setting the position on the strap is frustratingly difficult.
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, PD Team, July 25, 2023
We're sorry to hear the micro clutch doesn't work with your camera body as expected! We tried hard to accommodate as many makes and models as possible but unfortunately, there are a few out there that just don't quite work. We'll update our compatibility chart accordingly and please reach out to our support team at info@peakdesign.com and we can assist with processing a return for you.
Got my I-plate version and so far I'm quite satisfied. It takes some time to get used to leaving the index finger out of the clutch, but other the fit is secure. I was a bit surprised that with my small hands I still can only use the outermost hole, but that is probably because I left the other end of the band as it was delivered. People with bigger hands might have to adjust the other end as well. That, or maybe I'm supposed to also leave my pinky out, but that feels very uncomfortable.
Getting to the battery is something I don't quite like, doing it when mounted on a tripod is impossible. That's the price of universality, I guess.
I purchased 2 of the micro clutch, and upon receiving them, neither box contained the assembly tool. I checked both boxes, and both boxes do not have them. That was my first issue. Then, I attached it to my Fujifilm x100v and the battery compartment/SD card slot, cannot be accessed with the micro clutch attached. This is the same for my Fuji x-e4, where the battery door cannot be opened even with the base of the micro clutch loosened, and moved - you actually have to remove the entire base (unscrew it completely) in order to access the battery/SD card slot. In the end, while it's a cool idea, especially for smaller mirrorless cameras, its not as practical as I had hoped it would have been.
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, PD Team, July 17, 2023
Thanks for the feedback and review here! Micro Clutch was meant to be as universal as possible instead of model-specific, so there’s no dedicated hole for a battery door. We opted for a universal design to allow users to re-use the plate if they upgraded to a new camera with a similar body style. Having a universal design also allows users to use a single plate across multiple cameras with similar body styles. Because some users will need to twist or remove the plate to access batteries or SD cards, we opted to make the tool integrated into the plate itself so you’ll always have quick access instead of frantically trying to fish a tool out of your pack or pockets.
You can see how quick and easy it is to make that swap here: https://www.youtube.com/shorts/veA-nVnbNes
I have the regular size Peak Design Clutch and it works excellent on my full frame Canon R6. I wanted something similar that would fit my much smaller X100V and when the Micro Clutch came out, it looked to be exactly what I was looking for. Trying it out on my camera is even better than I expected.
My favorite features of the Micro Clutch are that it goes across almost the entire bottom of the X100V which allows it to stand flat on a table. I also found the clutch handle a good size. I like to use it with 3 fingers, leaving only my index finger free to press the shutter. I found this more comfortable than using only 2 fingers. The integrated tool is also really well thought out. It would have been annoying to carry around a separate tool to remove the bottom bracket whenever I need to change the battery or have access to the SD card. But including the integrated tool makes up for that and I found it to not be any hassle to remove the bottom bracket for access to the battery compartment on the X100V.
I really recommend the Micro Clutch for anyone who likes to carry their smaller cameras without a neck strap. Just grabbing my X100V without a dangling camera strap makes my setup much more compact and packable.
I recently started using the Micro Clutch from PeakDesign and I'm quite satisfied with its performance. I'm using the Fujifilm XT30 camera, paired with the Type I Micro Clutch, and this combination is truly perfect.
Before I started using the Micro Clutch, I used to use the Capture v3. However, I found that it would cover the battery cover, preventing me from quickly replacing the battery and memory card. Every time I needed to change the battery or memory card, I had to remove the Capture v3. This not only required additional tools, but there was also no suitable place to store the removed Capture v3. However, since I switched to the Micro Clutch, these problems have been resolved. Now, I can quickly disassemble the Micro Clutch to replace the battery and memory card, and I no longer need to carry additional tools, nor worry about where to store the removed Micro Clutch.
In addition, after using the Micro Clutch, I can finally operate with one hand. This is a significant improvement for me as it allows me to take photos more conveniently.
Lastly, I want to mention that the base of the Micro Clutch is compatible with Capture v3, which allows me to use the previous quick-release system.
In conclusion, I am very satisfied with the Micro Clutch from PeakDesign. It solved the problems I encountered when using Capture v3 and provides the convenience I need. I strongly recommend all Fujifilm XT30 users to try the Micro Clutch.
first impression: beautiful, well-made, lightweight, It took a bit of skill and patience to set up, thankfully I got it done👍 I installed it on the A7r3, I found it a little bothering at first, but quickly found it easier to take out of the backpack, and I felt the advantages of it
I will come back to share my experience after taking it out for a few days🍻