Customer Reviews for Peak Design - Micro Clutch Hand Strap - Black
Customer Rating
3
Solves One Problem, But Causes Another
on July 28, 2023
Posted by: Helen L.
from Tucson, AZ
I purchased the I-plate and L-plate through the Kickstarter. I've done this before with their bags and their mobile creations, which I was very satisfied with. The Micro Clutch, however, attempts to solve a problem, but then creates a new problem. I am a female with slender, long fingers and I have been using the Gariz leather thumb straps on ALL of my Fuji X cameras for over a decade. So when I saw this Kickstarted, I wanted to give it a shot.
The Micro Clutch is well made as per usual by Peak Design. The problem it causes is the inconvenience of changing the battery. In the field, have found myself fumbling to take out the tool, maintain the screw, and then slide the plate while also managing a new battery while popping out the old battery. Often dropping one or all three. If you have arthritis or hand issues, you will find this design highly irritating.
Otherwise, the Micro Clutch feels comfortable and stable. The strap is a joy if you never ever have to change the battery on your Fuji. I installed them on a Fuji X-T4 and an X-30. It is a bit of an overkill for any X100 version, IMHO. The strap is very reminiscent of an old school Sony Handycam Strap.
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, PD Team, July 31, 2023
Thanks for the feedback! Micro Clutch was meant to be as universal as possible instead of model-specific, so there’s no dedicated hole for a battery door. We opted for a universal design to allow users to re-use the plate if they upgraded to a new camera with a similar body style. Having a universal design also allows users to use a single plate across multiple cameras with similar body styles. Because some users will need to twist or remove the plate to access batteries or SD cards, we opted to make the tool integrated into the plate itself so you’ll always have quick access instead of frantically trying to fish a tool out of your pack or pockets.
I was in the Kickstarter for the Micro Clutch and was looking forward to receiving it. I wish I'd thought more about the product. It is very well made but the way it works I need to remove the base plate every time I need to change the battery or remove the SD card. This is a real pain. So its gone back in the box and in a drawer to gather dust.
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, PD Team, July 31, 2023
Thanks for the feedback! Micro Clutch was meant to be as universal as possible instead of model-specific, so there’s no dedicated hole for a battery door. We opted for a universal design to allow users to re-use the plate if they upgraded to a new camera with a similar body style. Having a universal design also allows users to use a single plate across multiple cameras with similar body styles. Because some users will need to twist or remove the plate to access batteries or SD cards, we opted to make the tool integrated into the plate itself so you’ll always have quick access instead of frantically trying to fish a tool out of your pack or pockets.
As with all Peak Design products, of which I have many, it is well executed and thoughtfully designed.
I like having a plate attached to the camera for use on a tripod or with Capture. I do realize that the Micro-clutch does account for this; unfortunately, the first iteration using a plate-on-top-of-a-plate is a bit too bulky and cumbersome. Perhaps a later version could potentially employing a singular plate that can do both?
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, PD Team, July 31, 2023
Thanks for the feedback! Many people want to know why we didn’t just add ARCA rails to the plate itself. There’s two reasons why we chose not to do that. First, Micro Clutch prioritizes compatibility with smaller mirrorless cameras because the added grip it provides is most useful on cameras that lack a useful grip feature. In order to make Micro Clutch compelling for smaller cameras, we fought hard to keep the baseplate size and thickness as minimal as possible. Forcing ARCA integration into the baseplate would have increased its width by a full centimeter. On some smaller cameras, that meant the plate would be noticeably protruding outwards on the front and back sides of the camera body. We actually prototyped this and the result did not meet Peak’s requirements for being a great looking product.
Second, adding ARCA rails to the baseplate does not create compatibility with Capture, which was a requirement for this product. You need the full standard plate geometry to maintain Capture compatibility and we solved that through the addition of an accessory plate. The Micro Clutch accessory ARCA plate provides Capture compatibility, ARCA compatibility, and is also removable for those users who don't need it, so we feel like that is the best option. The accessory ARCA plate was designed to be constrained in the baseplate so the user isn’t required to re-align it during install. During removal, the ARCA is held in place by magnets so it won’t fall away from the baseplate during a battery swap.
The Micro Clutch accessory ARCA plate provides Capture compatibility, ARCA compatibility, and is also removable for those users who don't need it, so we feel like that is the best option. The requests for ARCA rails in the main plate, or L-Plate geometry added to the end of the plate are relevant questions, but we feel those are different products. No one was designing a comfortable, streamlined strap for smaller mirrorless cameras out there and that's what we set out to do. Micro Clutch is first and foremost a hand strap optimized for smaller mirrorless cameras, especially those without a built in grip. It also prioritizes compatibility with Peak's current ecosystem of products (like Capture V3), not just ARCA tripods.
I was hoping that the strap would be narrower to be more compatible with the smaller mirrorless cameras. While the Canon M6 Mark II has a slot for the strap to feed through, the strap is too wide. Using the triangle that's meant for eyelets puts the strap at a weird angle. I got it to work by adding my own tiny split ring, but would much prefer a narrower strap.
Ive been a clutch user for years. It’s great but I always had to bend my shooter finger in an awkward position to hit the shoot button. Usually i never had the strap completely on my had. This clutch fixes that. I was worried about the strap hitting the webbing between my fingers but it has just enough clearance that it doesn’t. i can hold my camera with my fingers more where it would naturally be. I think it’s a keeper.
I was admittedly expecting what I often do with Peak Design products: reading the good and bad, but finding love well into ownership (once the learning curve passes).
Unfortunately though, the micro-clutch is perfect—it’s easy to install, far more adjustable for variable sizes and potential grips than I had been lead to believe, and super comfortable and intuitive. It has no learning curve. It’s just another Peak Design product where all of the elements are in a delicate balance, and once you explore the parts’ relationships to the sum, its design feels so carefully considered.
The L plate on my XT-5 is out of the way and feels like a natural extension of the camera. Even with heavy lenses, my averagely sized but not small hands, and two-or-three-finger grips with the strap at one of its tightest settings, it’s comfy and adds the perfect amount of security.
I believe this will work for you. You know that you know that Peak Design knows what they’re doing. P.S. The split ring tool is phenomenal—y'all are wild.
I just received the L-bracket for my Fujifilm XT-5. I have been using the Fuji handgrip (MHG-XT5) which extends the hand grip of the stock camera. The screw mount on the Fuji hand grip has the new 1/4-20 mount-hole within the mounting screw so the location does not shift like it does with other hand grips. During the campaign, it was stated (rightly so) that if you used an L bracket or hand grip, the micro clutch would not fit properly (I believe because almost all hand grips shift the location of the new 1/4-20 mount) and I was curious if it would work with the Fuji mount because of the specific screw they used. I first tried the clutch the 'standard' way, directly on the camera, and it worked fine. I find the hand grip on the camera a little small, and I think the micro clutch really addresses this issue, and I may pull the extended hand grip off to see if just the micro clutch is the solution. I then put the hand grip back on and tried the micro clutch. They are a great combo. while without the handgrip the micro clutch almost extends too far past the native grip, with the extended hand grip they fit perfectly. The main issue is weight, the Fuji hand grip is not light, and so having two plates on the bottom really increases the weight of the camera. When I add the dual plate, that will just add to the issue. The micro clutch comes on and off easily, without loosening the hand grip (not really an issue, 90% of the time I charge through the camera). So if you use the Fuji brand extended hand grip on your XT-5, the micro clutch will mount to the bottom of the hand grip and work as a cohesive unit.
I am a Peak Design fan. Have many of their products and love them, but not this! Got both the l-plate and the i-plate for my two OMs. The original clutch works much better on the OM-1. And the i-plate was very uncomfortable on the 5. They should have tested this on more cameras. Not ready for prime time. Wish I could return them, but I bought them as a part of the kickstarter promo.
No, I would not recommend this to a friend.
Response from Peak DesignBy PD Team, PD Team, July 25, 2023
We're sorry to hear the micro clutch doesn't work with your camera body as expected! We tried hard to accommodate as many makes and models as possible but unfortunately, there are a few out there that just don't quite work. We'll update our compatibility chart accordingly and please reach out to our support team at info@peakdesign.com and we can assist with processing a return for you.