Customer reviews from dewalt.com
Dewalt - IMPACT CONNECT Copper Pipe Cutter, Impact Driver Attachment, Tubing Cutter (DWACPRIR)
Average customer rating
4.5
(60 Reviews)
Rating breakdown 60 reviews
5 Stars
38
4 Stars
17
3 Stars
3
2 Stars
2
1 Star
0
96%of customers recommend this product.
(
53 out of
55)
Customer Reviews for Dewalt - IMPACT CONNECT Copper Pipe Cutter, Impact Driver Attachment, Tubing Cutter (DWACPRIR)
Customer Rating
4
Makes cuts easier.
on May 6, 2024
Posted by: Alanbig_1
from Edmonds, WA
[This review was collected as part of a promotion.] Works great on new installation or small repairs, cuts copper pipes fast and with no or low effort, the down side is that it's bulky and a bit bigger and feel akward when handling. But overall is a great product.
I would recommend this to a friend!
Written by a customer while visiting dewalt.com
Customer Rating
3
Decent product.
on April 29, 2024
Posted by: Ric2020
[This review was collected as part of a promotion.] Its a nice tool, once installed on an impact it is very heavy. Once cutting the tool cuts very well minimal bur on the inside on the pipe, not bur on the outside of the pipe. Biggest complaint is the handle clamp does not fit around any attachments on the impact IE belt clip or bit holder. Occasionally the cutter slips on the pipe and takes a turn or two to engage and start cutting.
Response from dewalt.comBy DEWALT, May 9, 2024
Hello Ric2020 and thank you for your feedback on the DWACPRIR IMPACT CONNECT Copper Pipe Cutter Attachment. Your feedback is valuable as we take into consideration every piece of feedback that we come across. We have documented your comments and sent them to our product team for review and future consideration. It is feedback like yours that allows us to make improvements.
Thanks, Roxy Social Media Team
Thanks, Roxy Social Media Team
Written by a customer while visiting dewalt.com
Customer Rating
5
Great accessory for anyone with multiple impacts!
on April 23, 2024
Posted by: Kdog
from Hermiston Oregon
[This review was collected as part of a promotion.] The connection between impact and accessory are fantastic. I used this on a small plumbing job in my home and it saved me a lot of time with clean cuts and less down time than a traditional copper cutter. As someone who owns multiple impacts, this fits seamlessly into my existing tools.
I would recommend this to a friend!
Written by a customer while visiting dewalt.com
Customer Rating
4
Convenient tool to have in a tight space.
on April 23, 2024
Posted by: BlAcKShEeP79
from Ft. Lauderdale, Fl
[This review was collected as part of a promotion.] The cutter has great cutting speed. It has the convenient of changing out the three common sides. It’s good in tight spots and multiple cutting. It’s only good for the impact drills. It’s as big compare to the drill and as heavy.
I would recommend this to a friend!
Written by a customer while visiting dewalt.com
Customer Rating
5
Another great product I didn't know I needed.
on April 22, 2024
Posted by: John B
from North Carolina
[This review was collected as part of a promotion.] I first thought the copper pipe cutter would be too bulky and heavy to be practical, but its usefulness outweighs any bulk and weight. I had no issues getting the rotating head into some fairly tight framing to cut old ¾" copper.
Assembly and use was pretty easy to figure out without looking at instructions. It fits my red brand drills and drivers perfectly after removing belt clip and bit holder, not a big deal - if I'm using this on a job, it will be in a dedicated drill/driver anyway.
Set up took less than 2 minutes.
Changing the cutter head takes about 3 seconds!
Each cut takes 4-5 seconds. Nice clean cuts!
Great tool.
Assembly and use was pretty easy to figure out without looking at instructions. It fits my red brand drills and drivers perfectly after removing belt clip and bit holder, not a big deal - if I'm using this on a job, it will be in a dedicated drill/driver anyway.
Set up took less than 2 minutes.
Changing the cutter head takes about 3 seconds!
Each cut takes 4-5 seconds. Nice clean cuts!
Great tool.
I would recommend this to a friend!
Written by a customer while visiting dewalt.com
Customer Rating
4
Efficient copper cutter
on April 21, 2024
Posted by: HandyD
from Oklahoma
[This review was collected as part of a promotion.] This copper cutter definitely works and is up to the task of making all of your copper pipe cuts much easier than using a manual cutter. With some practice, it attaches to my impact driver pretty easily and quickly. I appreciate that both the 1/2" and 3/4" cutting wheels are included with the tool, and its easy and quick to change out the cutting wheels. I've used both sizes and so far no issues with any cuts. The attachment is somewhat bulky and quite heavy, but it does somehow still manage to fit into all the tight spaces. A nice feature is that the nose rotates 360 degrees and this helps with tight spaces and angles. Overall this is a very efficient solution for cutting copper pipe. For me the biggest drawbacks are the heavy weight of the attachment and that it takes an impact driver out of service if you are making frequent cuts. This is why I drop from 5 to 4 stars. For a few cuts, its a perfect solution. If I needed to make cuts all day long I would be more inclined to spend a bit more and purchase a dedicated powered cutting tool.
I would recommend this to a friend!
Written by a customer while visiting dewalt.com
Customer Rating
5
Time Saver!
on April 21, 2024
Posted by: Daniel1999
from Albrightsville,PA
[This review was collected as part of a promotion.] I had it on a few jobs and it made them a lot easier.sure if your limited to space this is not your tool but this was very easy to put on a impact driver that i had as a spare. it cuts pretty fast and leaves a decent edge i still de bur the copper.my only problem i had was the spring that locked the bar to the base the spring kept shooting out when taking it off tool here and there.
I would recommend this to a friend!
Written by a customer while visiting dewalt.com
Customer Rating
5
The tool I didn't know I needed!!!
on April 21, 2024
Posted by: Dane Gerous
from Oklahoma
[This review was collected as part of a promotion.] The tool I didn't know I needed!!! To my surprise this copper tube cutting tool worked quite well. cut 3/4" ridged copper fast and easy. I would assume it would do equally as well on 1" but did not include the attachment for that. It did include the 1/2" attachment but seemed to me to be overkill for that unless you are doing a bigger project. If you are going to use it regularly I would suggest an additional drill/driver so not to have to switch back and forth...
I would recommend this to a friend!
Written by a customer while visiting dewalt.com