I sawed so long I had to quit from exhaustion, and I am in good shape. Took it out the next day without recharging and it quit when I was exhausted. Two solid days on one charge.
This Pole Saw does a great job for around the property. Has more then enough power to cut down arm sized trees. Have not used long enough to kill a battery yet. Come the fall and we will see.
So far, I have spent more time putting the chain back on than I have using the saw. Very annoying!
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, July 20, 2022
Hello dhawke,
Sorry to hear that the unit is performing to your expectations. Chains stretch with use. When new, they stretch more. The tension on a new or newish chain should be checked and tightened every 20 minutes of cutting or so, it can get away from you fast. This is normal stretching. Tension techniques can be found in the owner's manual. If you require additional assistance, pleas contact us directly at 1-888-909-6757 and we will provide an instructional guide to help you navigate the tension on your chain. We look forward to speaking to you.
Was finally able to try this new tool and it exceeded my Expectations. Light enough to handle easily with the power to cut through pretty good sized branches. Great addition to my growing collection of Greenworks tools.
The pole saw is completely useless because the chain does not stay on. Such a waste of money.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, July 4, 2022
Hello AngieArch,
Thank you for your feedback. We are sorry to hear that you have experienced an issue with the chain staying on the bar. Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and make the chain lean to one side. Chain Tension: Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. A correctly tensioned chain should only pull away from the bar enough to fit a dime (10c) between the teeth and the bar. *Do not tension a chain after you have finished using the tool. The hot metal expands. If the chain is tension when hot, then allow to cool. The contracting metal could potentially damage the chain, the bar and even the unit Wait until the next day for use (or at least until cooled) before tensioning. Should you have any further questions or warranty needs, please feel speak to Greenworks Customer Care at 1-888-909-6757 (1-888-90WORKS).