Customer reviews from mount-it.com
Mount-It! - Long-Extension Full-Motion TV Wall Mount for 4280" TVs (110 lb), Extends to 40" from Wall - Black
Average customer rating
4.8
(135 Reviews)
Rating breakdown 135 reviews
5 Stars
119
4 Stars
12
3 Stars
2
2 Stars
2
1 Star
0
97%of customers recommend this product.
(
97 out of
100)
Customer Reviews for Mount-It! - Long-Extension Full-Motion TV Wall Mount for 4280" TVs (110 lb), Extends to 40" from Wall - Black
Customer Rating
5
Amazing
on June 21, 2020
Posted by: John A. Saulnier
This product is over a stairway and spans the entire width into the room! I recommend this to everyone! Very happy
Written by a customer while visiting mount-it.com
Customer Rating
5
Well Done, But shy on hardware
on June 11, 2020
Posted by: James
This mount is just what I needed for the TV and space I wanted to place it.
However it was a good thing I had leftover bags of screws from other manufacture kits. There were no screws for a Samsung UN55NU6950F
However it was a good thing I had leftover bags of screws from other manufacture kits. There were no screws for a Samsung UN55NU6950F
Written by a customer while visiting mount-it.com
Customer Rating
4
Long reach, but flexes.
on June 3, 2020
Posted by: S Hoover
I appreciate how long of a reach this mount can achieve; it's the reason I chose it. If you need the extension length, it's an okay mount, but there are a couple of downsides. Both downsides are connected to it's the forces experienced by the mount when extended. When extended straight out from the wall, all the forces align perpendicular to the dual arms and everything remains aligned. If extended any direction other than straight out, then there's a torque experienced at the hinges. This torque is mostly resisted by the mount, but not completely, so with my mount, when fully out to one side or the other, the torque results in about a 2-degree tilt. The tilt can be corrected for one position, but if moving the TV between multiple positions, a compromise has to be made as to how far out of level is acceptable in the various positions. The same issue of torque drives the 2nd problem. As the torques cause the hinges to twist, the pressure on the washers varies leading to points of increased friction making it hard to move the mount at certain points. Certainly, nothing that can't be overcome w/ a bit more pushing, but wouldn't call the movement `smooth.` Overall, a decent mount, and about the only choice if the available amount of extension is needed, but it's not w/o its drawbacks.
Written by a customer while visiting mount-it.com
Customer Rating
5
Long arm
on May 3, 2020
Posted by: H young
Have a 65 tv that we wanted to mount on the wall and be able to swivel it where we wanted it. This mount is working as it should
Written by a customer while visiting mount-it.com
Customer Rating
5
Fantastic.
on April 21, 2020
Posted by: Shilpan
Put 95lb 75 in tv on it. Fantastic. Took the weight and works as advertised. The only thing I did have to change are the bolts. I went will larger and longer to make sure it would hold. Would recommend those are included in the kit. But overall super happy with the purchase.
Written by a customer while visiting mount-it.com
Customer Rating
5
Mount-it
on April 8, 2020
Posted by: Russell Harrell
The mount-it 40 inch Articulating TV mount is A GREAT product. It was easy to install and with a 40 inch extension positioning ability makes it worth the money compared to standard wall mounts that has only one position with cost being near the same. This product I recommend and it is what they say it is.....
Written by a customer while visiting mount-it.com
Customer Rating
4
A great problem solver
on December 22, 2019
Posted by: Isaac
I work for an audio/video installation contractor. This mount is very unique in the sense that it extends farther than any mount I've ever worked with. This is a great option for floating TVs in deep cabinets
Upon unboxing, the packaging was incomplete (it was missing a foam side) but thankfully the mount was still in decent shape with only a few small surface scratches.
It installed easily and is a fairly conventional design. Slim on hardware for the TV interface, but in this case the correct hardware was included.
This particular install was a 65" LG OLED in a cabinet that had around 3" clearance on all sides. After carefully measuring, the gap on the top was at least an inch larger than it should have been. It was immediately obvious there is a significant sag with this mount the farther you extend it out. The single arm had a noticeable angle downward. Easy enough fix, which is to slide the TV interface down, which pushes the TV up. However the TV interface has limited holes to interface with the TVs VESA pattern. The limited holes are from extra stamping in the rails to accept the cross bars. In this case, the wall portion of the mount had to be re-mounted. Annoying but not the end of the world.
Note the wall portion of the mount can only span 16" total. This is usually enough for 2 studs, but I do wish it was larger to offer more flexibility.
All in all I would use it again but would let the client know there will be extra labor to fine tune the TV's position.
Upon unboxing, the packaging was incomplete (it was missing a foam side) but thankfully the mount was still in decent shape with only a few small surface scratches.
It installed easily and is a fairly conventional design. Slim on hardware for the TV interface, but in this case the correct hardware was included.
This particular install was a 65" LG OLED in a cabinet that had around 3" clearance on all sides. After carefully measuring, the gap on the top was at least an inch larger than it should have been. It was immediately obvious there is a significant sag with this mount the farther you extend it out. The single arm had a noticeable angle downward. Easy enough fix, which is to slide the TV interface down, which pushes the TV up. However the TV interface has limited holes to interface with the TVs VESA pattern. The limited holes are from extra stamping in the rails to accept the cross bars. In this case, the wall portion of the mount had to be re-mounted. Annoying but not the end of the world.
Note the wall portion of the mount can only span 16" total. This is usually enough for 2 studs, but I do wish it was larger to offer more flexibility.
All in all I would use it again but would let the client know there will be extra labor to fine tune the TV's position.
Written by a customer while visiting mount-it.com