Amazing product! Holds my 65\ curved Samsung perfectly! Only negative thing is I had to cut the spacers in half as they were too long for the bolt to have an adequate hold. However
We love these at the office. We've installed 2 70\ tvs in one room for audiences to view and then another 65\" in a board room for meetings. They are sturdy
Very heavy duty . No play in all the positions. Some of the other ones I had looked at had a lot of movement. Will definitely get another one for tv in basement when TV room is finished.
Great mount. Due to the way the builder of my house put the coax and electrical outlets on the wall I had to hook the TV way to the right of this mount instead of having it centered and the mount holds just fine with no sag or anything like that. This is a real heavy duty mount
The good, its pretty sturdy for a single arm swing out mount.The not so good:1) very light weight screws, snapped one of the lag bolts.2) lag bolts: 12mm socket didn't fit them, neither did a 13mm socket. 1/2 inch socket fit best.3) Instructions call for a MINIMUM of 16 inch spacing between bolts. The widest spacing allowed by the mounting plate is 16 inches. So the minimum became a maximum. I had to drill mine to accommodate 18 inch spacing (old house). 24 inch spacing is not that rare, if your studs are spaced out that far, you will be SOL.Two lengths of bolts were included to attach to my TV: 40mm and 15mm. Unfortunately, I needed 25mm bolts. Spacers were too long. Note, every TV is different, I used 25mm long bolts on the top, and I used the 40mm bolts (with a couple of extra washers, not included) for the bottom.Despite the shortcomings, I would buy this unit again. My TV only weighs 36 pounds, to this mount is overkill, but what I would prefer (minimal/no sag).Maybe I over-rated this one at a \4\"