Customer reviews from greenworkstools.com
Greenworks - 1700 PSI and 1.2 GPM Pressure Washer
Average customer rating
4.5
(4,007 Reviews)
Rating breakdown 4,007 reviews
5 Stars
3,006
4 Stars
591
3 Stars
115
2 Stars
83
1 Star
212
91%of customers recommend this product.
(
3,261 out of
3,587)
Customer Reviews for Greenworks - 1700 PSI and 1.2 GPM Pressure Washer
Customer Rating
5
Favorite purchase of 2021
on February 22, 2021
Posted by: Celine085
from Titusville, NJ
Very powerful and is already the best thing I’ve bought this year. Can’t recommend enough!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
This Pressure Washer is a BEAST
on February 22, 2021
Posted by: GWbeliever
from Ft Lauderdale, FL
I was skeptical making the switch from gas to electric, especially for pressure washers but this unit not only met but exceeded my expectations! It powerful! It’s very easy to set up and use and I never have to worry about winterizing my pressure washer again!!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
So easy to use!
on February 22, 2021
Posted by: Sam0195
from Franklin, TN
I bought this pressure washer a few months ago and it is so easy to use and really gets the job done.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: MortFromOrt
Verified Purchase:Yes
Met all of my requirements so far however I have only had this for one month so far.
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Nice Portable Pressure Washer
on February 14, 2021
Posted by: Thomas71
from Albuquerque, NM
This has been a nice little pressure washer for around the house. The compact size and ease of use make it a must have house hold item. My only complaint would been the length of the washer hose, it could use a few more feet.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
2
Not worth the money
on February 12, 2021
Posted by: OldBob
from Corpus Christi, Tx
Was given the pressure washer as a Christmas present a few years ago. Used it for the first time 2 summers ago to wash my driveway. Worked like a champ. Tried to use it this past summer to wash the back porch. It kept tripping the GFI. Plugged into the outside GFI my shed and it does the same thing. Just tried to use it again and it’s doing the same thing. It’s pretty and it looks good sitting in my garage. But it looks like I’m not the only one who has experienced this problem. Greenworks should post this issue on the box. It might keep buyers from spending so much money on a one time use pressure washer.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy GreenWorks Tools, GreenWorks Customer Care, February 12, 2021
Hello OldBob,
We're sorry to hear that you are experiencing problems with this pressure washer. It is not normal for this to occur. Tripping the circuit breaker, often this is caused by a faulty nozzle, remove the nozzles and try a different nozzle. If the nozzle is causing the issue it may be clogged or damaged. Clean the nozzle and try again. if issues continue with the same nozzle seek replacement.
Make sure there are no other appliances running at the same time as your pressure washer unit.
We would suggest trying an alternate plug on a different circuit in your home; any large appliances on the same circuit could be the reason it is occurring like this. Make sure to not use an extension cord.
Should these suggestion does not resolve the issue you have had, we would be interested in hearing more about these issue. Please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
We're sorry to hear that you are experiencing problems with this pressure washer. It is not normal for this to occur. Tripping the circuit breaker, often this is caused by a faulty nozzle, remove the nozzles and try a different nozzle. If the nozzle is causing the issue it may be clogged or damaged. Clean the nozzle and try again. if issues continue with the same nozzle seek replacement.
Make sure there are no other appliances running at the same time as your pressure washer unit.
We would suggest trying an alternate plug on a different circuit in your home; any large appliances on the same circuit could be the reason it is occurring like this. Make sure to not use an extension cord.
Should these suggestion does not resolve the issue you have had, we would be interested in hearing more about these issue. Please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
Written by a customer while visiting greenworkstools.com
Customer Rating
1
1800 PSI No Presure washer
on February 10, 2021
Posted by: Lleezzyy
from Houston, Texas
Bought last year, this is the 3 time to use and as everyone no soap dispensing: also there is absolutely no pressure. I tried to wash my armor so that I could stain it in my garden hose is stronger than this machine it says to dispense so on low pressure now it doesn’t say how to do it plus it’s just worthless and I threw my money away when I bought this
No, I would not recommend this to a friend.
Response from greenworkstools.comBy GreenWorks Tools, GreenWorks Customer Care, February 11, 2021
Hello Lleezzyy,
We are sorry to hear that you are experiencing an issue with your pressure washer. This issue can be caused by a few factors such as excess air trapped in the pump, clogged nozzles or no nozzle being installed. Here you will find some troubleshooting suggestions to resolve these issues.
1) To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3) Ensure a nozzle is connected.
4) Ensure that the water source is fully opened and is at least 60PSI.
5) There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
If you have tried these steps and are still experiencing issues, please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
We are sorry to hear that you are experiencing an issue with your pressure washer. This issue can be caused by a few factors such as excess air trapped in the pump, clogged nozzles or no nozzle being installed. Here you will find some troubleshooting suggestions to resolve these issues.
1) To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3) Ensure a nozzle is connected.
4) Ensure that the water source is fully opened and is at least 60PSI.
5) There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
If you have tried these steps and are still experiencing issues, please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
Written by a customer while visiting greenworkstools.com
Customer Rating
5
So good that I bought a second one!
on February 2, 2021
Posted by: DickB
from Port Orange, Florida
I love this pressure washer. So much so, that I bought a second one for my vacation home. It works just as good as my gas powered one. So, I'm done with having to buy gas, storing it, keeping it fresh with stabilizer, etc. And, best of all, it is so much quieter than the gas powered one that I don't bother the neighbors with the noise. Just hope I can sell the gas one before people find out about this electric one.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com