Customer reviews from mount-it.com
Mount-It! - Heavy Duty VESA Adapter Mounting Kit for Monitors Up to 30 Non-VESA to VESA 7575/100100 - Black
Average customer rating
4.2
(24 Reviews)
Rating breakdown 24 reviews
5 Stars
9
4 Stars
10
3 Stars
5
2 Stars
0
1 Star
0
Customer Reviews for Mount-It! - Heavy Duty VESA Adapter Mounting Kit for Monitors Up to 30 Non-VESA to VESA 7575/100100 - Black
Customer Rating
3
Pretty disappointed with this
on September 1, 2017
Posted by: Customer
Pretty disappointed with this. Ended up returning. Although it says it will accommodate a wider depth bezel to make that work you have to extend these really flimsy 2 inch screws all the way out which just didn't seem enough to hold my screen. The top pieces don't do much, all the weight is on the bottom two screws. The parts that actually hold the screen are plastic and slide around on the screw. It would have been really easy for someone to bump my screen and it fall out of this.
Written by a customer while visiting mount-it.com
Customer Rating
5
Great product
on September 21, 2017
Posted by: Annie
This is a great product. More than enough pieces to adjust for any monitor construction. If I change monitors in the future I can easily change out and mount the new monitor.
Written by a customer while visiting mount-it.com
Customer Rating
5
The Mount-It bracket was a little confusing at first to get onto the monitor but once I figured it out it's worked great.
on December 14, 2017
Posted by: Raven Whitefang
I have a Samsung monitor and an Asus. The Samsung didn't have a VESA mounting setup and I needed a way to mount it to a two monitor mount. The Mount-It bracket was a little confusing at first to get onto the monitor but once I figured it out it's worked great.
Written by a customer while visiting mount-it.com
Customer Rating
3
The tool that comes with it does not work
on December 30, 2017
Posted by: Karena William
After a few hours dedicated to lots of adjustments my husband got it to work. The biggest complaint is the tool that comes with it to tighten the nut and bolt. It is cheap and really is not the right size to get the job done we used pliers instead.
Written by a customer while visiting mount-it.com
Customer Rating
4
Not great for curved monitors. Solid construction, but the small screws will strip.
on January 4, 2018
Posted by: George
Product is solid, except for the small screws which attach to a nut between the adapter and the VESA mount. They stripped for me after trying the 3 configurations shown in the instructions.I was not able to use the adapter with this monitor: because the placement of the ports on the back of the monitor did not agree with any configuration, causing the monitor to not be usable with the adapter attached.
Written by a customer while visiting mount-it.com
Customer Rating
3
Three Stars
on January 10, 2018
Posted by: Bvh
Does not work well with Samsung 27" Monitor (S27C500).
Written by a customer while visiting mount-it.com
Customer Rating
4
Use an adjustable wrench and allow an hour to install
on March 12, 2018
Posted by: Icemom
It does what it's supposed to do, but it took me almost an hour to make it work. The directions are just illustrations, which are neither detailed nor large. The little wrench is terrible. It's just a bit too big and doesn't grip the nuts very well, so I ended up using an adjustable wrench. At first, I put the VESA plate on backwards, but then I realized my mistake. Here are my installation takeaways: - Don't tighten anything down too much because you'll need to adjust the arm length and placement. The little hook-grippy-things shouldn't be tightened all the way, either. - Don't put more than one bolt in the sliding metal arms. I started by putting two in each arm, but ended up using just one in each arm. I think it's easier to add them than to take them out. - Maybe it's obvious to everyone else, but it didn't occur to me that the different length bolts for the hook-grippy-things were to accommodate different monitor depths. I'm glad I used the medium-length bolt on the first try! - The little buttons that cover the bolts on the hook-grippy-things have an interior spoke that's longer than the others. That spoke fits into a groove in the hook-grippy-things. Don't waste your time forcing that button into the hole.Overall, I think it's a good product. It holds the monitor just fine and attaches to my monitor mount's VESA plate, so it works. Just make sure you have a Phillips-head screwdriver, an adjustable wrench and a good hour to toy with it.
Written by a customer while visiting mount-it.com
Customer Rating
3
plan on 30 minutes to put it together, UGH!
on June 26, 2018
Posted by: Scott Davis
Pain in the butt putting it together, but it works....
Written by a customer while visiting mount-it.com