Customer reviews from mount-it.com
Mount-It! - Universal Tablet Pole & Desk Mount for Tablets Up to 13.3" Adjustable Height & Rotation - Black
Average customer rating
4.2
(90 Reviews)
Rating breakdown 90 reviews
5 Stars
43
4 Stars
24
3 Stars
23
2 Stars
0
1 Star
0
100%of customers recommend this product.
(
1 out of
1)
Customer Reviews for Mount-It! - Universal Tablet Pole & Desk Mount for Tablets Up to 13.3" Adjustable Height & Rotation - Black
Customer Rating
5
SUPER
on February 12, 2014
Posted by: Patrick Andrews
Best mount for the money. Super easy to set up and use. I have one in my kitchen. Get one.
Written by a customer while visiting mount-it.com
Customer Rating
4
Does what it should
on February 1, 2014
Posted by: M
I use this with my ipad 2. I had a little difficulty putting together. I hung it on concrete block in the basement above my treadmill. Nice to have a little \tv\" there."
Written by a customer while visiting mount-it.com
Customer Rating
3
Does not fit 7\ tablets"
on December 31, 2013
Posted by: idriveavw
Despite the description of the product, this does NOT fit 7 inch tablets. It's a shame. It seems like a good mount, bit it's useless to me.
Written by a customer while visiting mount-it.com
Customer Rating
3
Good but not for a 7 Inch Tablet
on December 17, 2013
Posted by: James O.
I bought this to use for a 7 inch tablet. It is too big for that. I liked the design and construction. I found a similar product and bought it . (Universal Tablet Mount 7.9\ to 8.5\" for Walls/Undermount Kitchen cabinets/Tables with extended arm - PXP-02S) For a larger tablet this would be great."
Written by a customer while visiting mount-it.com
Customer Rating
4
Tablet Wall Mount.
on December 15, 2013
Posted by: Bearmandan2
I bought this tablet wall mount to use in my bedroom so in case I fall asleep (which I've done many times) while watching a movie or the news to help prevent me from dropping it or laying on top of my tablet. The 4 star rating is because the wall mounting instructions were not very clear and the base locking mount becomes disengaged easily. It would be great if the arms were longer as well.
Written by a customer while visiting mount-it.com
Customer Rating
4
Works fairly well as an iPad holder
on December 6, 2013
Posted by: Mark V
I purchased this wall mount to hold my iPad 2 in a workshop environment. For this purpose it works rather well.Overall the construction is solid. Though plastic, the mount maintains a sufficient rigidness. I was concerned when placing the order that using this stand for a touch device would cause the iPad to move too much while in use. I can say this is not the case.There are five articulating points on the mount -- four on the arm and a ball/socket type joint on the actual TV/iPad mount. The middle two joints use large wing nuts to tighten and are very easy to use. The joints that are closest to the mount point and the device itself use smaller knobs. Though not as easy to adjust I did not find them annoyingly difficult to tighten. In fact all four of these joints were easy enough to tighten and hold their positions well.The actual TV mount is attached to the articulating arm with a ball socket. These are all plastic parts as well. The socket has slots that enable the ball mount to hold the unit without rotating in four positions -- up, right, down, left. You can also choose to use ball mount so that it doesn't utilize these lots. This gives you 360 degree rotation capability of the device. The key point is that this final articulating location has a firm grip but it is not a fixed grip or position like the other joints. It seems reasonable that this joint would also become less grippy with a lot of use down the road.The actual clamps that hold the device have a few issues that prevent a five star review. First, the depth of the clamps are fixed so you cannot adjust them. They are approximately 3/4 of an inch deep. My iPad with its smart cover fits well inside these and even though there is extra space it seems to hold it well. You will not have luck attempting to hold anything that is thicker.The two lower arms are a fixed radius. They are hinged such that they will hold the same angle relative to another and that is a nice feature. You will not be able to adjust the distance from the center of the mount to the holders if you wish to hold something smaller or larger. This is definitely designed for devices in the iPad 2 size range.The corner clamps can adjust their angle only slightly to accommodate their position. Again, given the small size range this is designed for that isn't a big issue.The top clamp is adjustable in height. A lever is decently accessible behind the mount to lock down the position. Leaving it unlocked still holds an iPad well and makes it slightly easier to insert and remove the device.In general I like the mount and it certainly met my needs for holding an iPad in my workshop. Improvements I would like to see would be to have all articulating points be firmly lockable so an exact position can be maintained and adjustable depth on the three clamping points to better accommodate slimmer than 3/4\ devices."
Written by a customer while visiting mount-it.com
Customer Rating
3
Form is fine, materials lacking durability.
on November 24, 2013
Posted by: David Hale
Three stars because its not a tota.l failure, and the price of the unit is minimal compared to many.Problems with the unit:The joints are not keyed, so the only thing that keeps them from moving is the compression induced friction of the bolts at each joint. Given an all metal unit, that might not have been a problem, but the bolt tighteners are plastic. After making occasional adjustments, maybe once a month, the bold handle for the base screw broke. It needs a lot of compression to hold that ipad still when its stretched out 2 feet.The ball/socket joint at the tablet cradle seems to work fine. the base rotation feels solid. If they would have added some splines to some of the joints, they would have vectored some of the force into the mechanism itself and bolt torque would not be the only thing holding your iPad up.Next version I guess...TL,DR: Having an iPad stand is great, but if durability is something you value, look elsewhere.
Written by a customer while visiting mount-it.com
Customer Rating
5
Perfect for iPad 1 in Kitchen!
on November 20, 2013
Posted by: DVDJedi
What a great mount that doesn't cost an arm and leg to afford! I installed it under my kitchen cabinets for my original iPad. The arm of this mount is sturdy and so far after several months the ball joint swivel\\tilt portion is holding strong and I have to move the ipad often as the only place to mount it was close to the sink and I don't want to splash my iPad with dishwater. I'm very pleased with this mount. No idea why the item title says its for 7 to 10-inch TVs though.
Written by a customer while visiting mount-it.com