Customer reviews from mount-it.com
Mount-It! - Ergonomic Dual Monitor Stand-Up Desk Converter with Height Adjustment, Keyboard Tray & Storage Shelf - Silver
Average customer rating
4.5
(78 Reviews)
Rating breakdown 78 reviews
5 Stars
47
4 Stars
22
3 Stars
9
2 Stars
0
1 Star
0
71%of customers recommend this product.
(
5 out of
7)
Customer Reviews for Mount-It! - Ergonomic Dual Monitor Stand-Up Desk Converter with Height Adjustment, Keyboard Tray & Storage Shelf - Silver
Customer Rating
4
Overall good for the price
on April 6, 2018
Posted by: MechMod
Overall good for the price. It took me longer than 20 minutes to built up, also it gets easier if you build it between two as I needed to do some tweaking at the end, my boyfriend had to hold it so it would not moved out place until it was completely secured. At first, it did not stay up when I lift it, however all you have to do is adjust the arm. Definitely a good option if you don't want to pay those expensive stand up desks. Final tip, this works better for tables made out of stronger material (wood, hard/thick plastic) due the weight it holds I do not think Fiberboard tables will work that well in the long run.
Written by a customer while visiting mount-it.com
Posted by: Michael L
from San Francisco, CA
Gender:Male
Verified Purchase:Yes
Well, after many hours of research I settled on the MI-7904 and very happy I did. I had everything setup in about 20 minutes and was able to put it together myself. The desk is very solid while in the standing position. I tend to put a lot of weight down on my keyboard but the desk holds its position with no sag. I was skeptical due to the low price point but the MI-7904 has exceeded all of my expectations. Very happy with my purchase and highly recommend!
I would recommend this to a friend!
Written by a customer while visiting mount-it.com
Customer Rating
4
and packaging was excellent. I have two 24\ monitors attached"
on December 6, 2013
Posted by: Mrs. P.
Shipping was quick, and packaging was excellent.I have two 24\ monitors attached; after adjusting the tensions
Written by a customer while visiting mount-it.com
Customer Rating
4
Wonderful, solid desk -- but the monitor mounts are severely lacking.
on December 15, 2013
Posted by: Tim P.
The desk itself is wonderful -- definite five stars! It's very solid and goes up and down easily. It locks into position at any height. The work surface is large and comfortable. The monitor holders are what cost this the star. First, even at their lowest setting, they hold the monitors too high. They were already elevated a few inches above the desk due to the desktop being higher than the keyboard shelf. Now add the inches for the monitor arms and you are looking UP to see the screens. Then -- and here's the irritating part -- the knob that tightens the upright monitor-bar in place interferes with the lowering of the desk. With the monitor mounts in place, the desk won't go down the last 3/4\. The monitor mounting bars aren't the spring type -- they are fixed height. The mounting bracket that attaches to the upright bar is the only height adjustment and
Written by a customer while visiting mount-it.com
Customer Rating
5
Great for desk that won't fit larger standup units
on May 2, 2018
Posted by: Christpher Hodge
Our office has been ordering many standup desks units, but we have many desks could not accommodate the model we have standardized on so when I found this unit I decided to gave it a try. This unit unlike others rises from the front and moves back so that those with overhead cabinets can join in the standing revolution. For those with short desks the base unit only needs 20\ of desk to rest securely. The keyboard tray easily accommodates a keyboard and mouse (even one users large MS Ergo KB) and the entire unit has a smaller foot print that many others.The assembly was simple and the instructions easily understood. The material is solid wood and the hardware mechanism all powder coated steel. I was very happy with the item and the users are enjoying their new desk setups. The price was also a big selling point too. about half the price of the big named brand we have been ordering.Modifications....One of the units I purchased was replacing a desk setup for a user who had a keyboard drawer. The problem was that this unit keyboard tray sits level with the desk. A quick review of the assembly instructions confirmed that I could change the points I attached the keyboard tray. This change would only allow me to attach the tray with two bolts but the material is more that strong enough to accommodate the mounting adjustment. This lowers the tray height 2 inches below the desk top surface
Written by a customer while visiting mount-it.com
Customer Rating
4
Exactly what it looks like and it works. Be sure it's what you want.
on May 2, 2018
Posted by: CheezeWhisperer
Almost everything I wanted. The assembly was a pain but it got together in the end. Then I realized the arm was about 3 inches too short for my uses. Plus the monitors are directly beside themselves so when you're looking at them head-on, you're looking at the 2 bezels. So you have to look left or right, there isn't enough room on the bar to have a \center\" monitor with one to the side.Besides all that
Written by a customer while visiting mount-it.com
Customer Rating
5
Compact and extremely sturdy, this sit/stand converter provides similar functionality to much ...
on May 2, 2018
Posted by: Donald K.
Compact and extremely sturdy, this sit/stand converter provides similar functionality to much more expensive models like Varidesk and its imitators. The adjustable gas spring allowed me to match the lift force to the weight of the equipment I have on top ( a 27\ monitor above and a 13\" MacBook Pro below). I modified the position of the lower shelf to accommodate my laptop
Written by a customer while visiting mount-it.com
Customer Rating
4
A worth purchase BUT BE AWARE....
on June 7, 2017
Posted by: Elle T.
Just got this set up at my office desk yesterday. Took longer to put together than I'd anticipated and I did get fairly frustrated a few times (see next paragraph) The instructions weren't the best, for example it shows two different ways of mounting the unit but it wasn't exactly clear...I kept trying to figure out how I was supposed to use parts from step 1b when I used them in step 1a! That may just be me though because a coworker was kind enough to glance at the paper and knew exactly what it was saying.Also, BE AWARE, it was terribly challenging to put this together if you don't have access to the back of your desk. This is where I spent the majority of my time and the source of nearly all my frustration. I have a cubicle and cannot remove the back wall. I had to smash my tiny, childsize hands between my desk and the cube wall while trying to tighten screws with an Allen wrench.Other areas where the instructions are lacking and good things to know if you buy this item:- if you use the clamp mount you'll likely have a LOT of leftover hardware. This had me super worried at first until I realized the parts were for the alternative mounting method which requires drilling holes through the desk.- one of the final steps is using the larger Allen wrench on the main arm of the unit (the piece directly affixed to the desk). You turn left or right (shows as a +/-) which is ultimately what allows the unit to move up and down easily. It's adjustable since not all monitors are equally heavy so you have to just play with it until you find what works best. This wasn't difficult but the instructions didn't make the purpose of this step abundantly obvious.- not having free access to the back of the unit meant I couldn't utilize the cord keeper along the main arm of the unit but this wasn't that big of a deal for me.All in all, after using it for the day it started to grow on me. It was certainly larger than I expected but I'm getting used to it and liking it more and more. It's a great alternative to the traditional sit stand desktop versions since it's MUCH cheaper and accomplishes the same goal. It appears to be good quality and the clamp method holds it to the the desk tightly. Aside from installation confusion, I'm happy so far with this purchase.
Written by a customer while visiting mount-it.com