We certainly apologize for the continued frustrations with the filters, generally if you put an inch of water in the reservoir and then grip the middle section of the filter with both hands and firmly squeeze the filter in a pumping action until you are completely certain that there is no more air coming out of the top of the filter this will solve the issue for the life of that filter. If you do not clear all of air from the filter this issue will continue to compound itself over and over. Also never fill the reservoir directly from the faucet or spigot from your sink as this is naturally aerated and will force air down inside the filter. It is best to fill the reservoir with a large glass or measuring cup and pour into the corner of the reservoir away from the center of the filter. If there is ever a filter that simply just will not fix itself when the aforementioned trouble shooting steps have been followed we are more than happy to replace that filter. Again, we apologize for any inconvenience this may cause.

Thank you for contacting ZeroWater. From time to time the filter can develop an air lock, some little air pockets or air bubbles that get trapped down inside the filter. Typically this is an easy and quick fix, simply remove the filter from the container and unscrew it from the tray. Then hold the filter sideways/horizontal and grip the filter very tightly and shake the filter with some good force side to side and back and forth 8 to 10 times. This will loosen the filter media and break the air lock.