Customer reviews from greenworkstools.com
Greenworks - Brushless 2300 PSI 2.3 GPM Max/ 1.2 GPM Electric Pressure Washer - Green
Average customer rating
4.6
(1,813 Reviews)
Rating breakdown 1,813 reviews
5 Stars
1,411
4 Stars
269
3 Stars
44
2 Stars
29
1 Star
60
93%of customers recommend this product.
(
1,528 out of
1,639)
Customer Reviews for Greenworks - Brushless 2300 PSI 2.3 GPM Max/ 1.2 GPM Electric Pressure Washer - Green
Customer Rating
4
Works well
on June 21, 2022
Posted by: Bill217
Gender:Male
I received this pressure washer on time and in good condition. I like the amount of pressure it has for an electric pressure washer, but wish it had more flow. I feel the pump would last longer if it did not try to build all the pressure and keep running at high speeds when not using, like whole washing a car. Overall good pressure washer, but could use some revamping.
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Great for Race Cars!
on July 7, 2022
Posted by: Venturini Motorsports
from Concord, NC
When our race cars come back from the race track covered in brake dust, tire rubber, caked in dirt, grass, and everything in between, THIS is the pressure washer we reach for. Not only is it compact and easy to use, but it’s just as powerful as any old pressure washer we’ve used in the past. With it being electric instead of gas powered, we love that we can use it inside and it’s not any louder than the machines we use on a daily basis. It’s also so convenient to store, that we can easily load it in any of our trailers. The only downside to this unit is when we want to use it outside, we have to be close to an electrical outlet or use an extension cord.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
4
Good, easy to use machine
on August 6, 2022
Posted by: Pebbly
from Northwestern Ohio
Greenworks 3000 psi pressure washer
The machine doesn’t t have the pressure of a gas machine, that I am accustomed to using, but it does have enough pressure to meet my needs and there is much less hassles than dealing with a gas. This is the first machine I have purchased for personal use, as such there are a few improvement that I think would make the machine more user friendly. The first I think would be a huge improvement; put a drain plug in the soap dispenser tank so unused solution can be easily drained. Or better yet, make the tank easily removable so the solution could be poured out. Maybe tabs molded into the tank that fit into pockets or clips on the frame with 1 hand bolt, similar to the handle bolts, to secure it. With a quick connect like the hoses for the machine to draw the solution out during use. It is really a hassle removing unused solution now. Next, improve the wand mount. Maybe angle the bracket on the handle & put a push clip for the nozzle end on the frame. Next is a small, nice to have thing; a hook maybe on the handle for a garden hose. You need a hose to use the machine, it would be nice to be able to store a hose neatly with the machine so everything is there.
Overall I think this a very good, easy to use pressure washer & I’m looking forward to being able to use it for large & quick cleaning tasks.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Only worked 3 times.
on August 8, 2022
Posted by: F Stone
from NC.
Gender:Male
I used it three times the fourth time I went to use it it did not work. Very disappointed in their customer service.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, August 10, 2022
Hello F Stone,
We are sorry to hear that you are experiencing an issue with your pressure washer. Unfortunately, your review is not detailed enough for us to know what the issue is, but we will try to cover all bases.
Here you will find some troubleshooting suggestions for you to try.
Cleaning Obstructed Nozzles: To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction. Removing Air from The Line /
Bleeding Out the Unit: Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
Lastly, ensure that the water source is fully opened and is at least 60PSI. There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
Please note this product has a 3-year warranty from the date of purchase. If you have tried these steps and are still experiencing issues, please contact Greenworks at 1-888-909-6757 (1-888-90WORKS).
We are sorry to hear that you are experiencing an issue with your pressure washer. Unfortunately, your review is not detailed enough for us to know what the issue is, but we will try to cover all bases.
Here you will find some troubleshooting suggestions for you to try.
Cleaning Obstructed Nozzles: To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction. Removing Air from The Line /
Bleeding Out the Unit: Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
Lastly, ensure that the water source is fully opened and is at least 60PSI. There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
Please note this product has a 3-year warranty from the date of purchase. If you have tried these steps and are still experiencing issues, please contact Greenworks at 1-888-909-6757 (1-888-90WORKS).
Written by a customer while visiting greenworkstools.com
Posted by: CL Concepts
from Redding CA
Gender:Male
Verified Purchase:Yes
So far the pressure washer has been awesome. I started my own car detailing business and this was something I wanted to be of quality and built right. The quality of this pressure washer is great and I have nothing but positive things to say about it.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: EricP
Verified Purchase:Yes
The pressure washer works great but if you need to use an extension cord make sure it’s a heaver extension cord because the pressure washer will not turn on.
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Bad pump design, brittle metal
on March 26, 2023
Posted by: Frandy
from Washington DC
I had this thing for a few years and worked great. Broke just outside of warranty and they did not offer any fix or redress. Don’t bother getting an expensive model thinking it will last longer. There is a design flaw with where the high pressure hose connects, note the other complaints about this.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks , March 28, 2023
Hello Frandy,
We appreciate you taking the time to provide this feedback on your pressure washer and apologize that you've run into issues with this part.
Although you are past the warranty period, one of our Authorized Service Dealers may still be able to help. To find a dealer in your area, please contact us once more and we would be happy to help!
We appreciate your longstanding loyalty as a customer and hope this experience doesn't bring it to an end.
We appreciate you taking the time to provide this feedback on your pressure washer and apologize that you've run into issues with this part.
Although you are past the warranty period, one of our Authorized Service Dealers may still be able to help. To find a dealer in your area, please contact us once more and we would be happy to help!
We appreciate your longstanding loyalty as a customer and hope this experience doesn't bring it to an end.
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Turbo worked best for me
on April 2, 2023
Posted by: Bone
from Summerville, SC
Gender:Male
Wasn't expecting much but this actually does it all. Used it all weekend on fencing, house, concrete and vehicles. Different nozzles depending on the application. Prime and go, and I don't have to worry about bad gas... Good enough for what I need to get done and then some, these companies have come a looong way with electric pressure washers. Well done.
Pros: Convenient, Effective, Powerful
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com