Customer Reviews for Greenworks - Pro Brushless 2300 PSI (SGS Certified) 2.3 GPM Max / 1.2 GPM Electric Pressure Washer - Green
Customer Rating
4
Great Washer
on July 1, 2018
Posted by: Sarge
from Gloucester, VA
Gender:Male
Got this to replace a 2600 psi gas-powered washer that I couldn't start any more. This unit did the job of cleaning my patio bricks just as well as the old washer and used half the water to do it (1.2 gpm vs 2.5 gpm). No more yanking on a starter cord!
I purchased my unit about 15 months ago. I really don't have any complaints with its performance. It is important that you read the manual prior to operating for the first time. I would like to see some changes in the soap tank. If you need to change soaps you have to essentially run the existing soap thru thus creating waste.
My 1600 works great. The only problem I’ve had with it was the soap/ solution attachment wouldn’t attach. All other attachments work and I’ve had it 4 years and really just use and put it away .
Oh my! Just fired up my new power washer to clean my farm truck, that sits-out all winter, up at my camp in NC.
Now, I've worked in construction all my life and I know quality tools. I also have a big gas run washer at my home in FL.
Pound for pound, the electric 1600 is miles above my gas driven washer monster. Literally plug it in and off you go. Simple to use, quiet, light and compact. Powerful enough to remove the winter crud from my truck, without taking the finish down to the bare metal. Did have a little difficulty installing the soap dispenser, but once I studied the picture in the Instruction Manuel I realized it replaces the outer end of the wand (easy, dripless switch between the two).
Bought this a couple weeks ago. Contractor put it together. Ran great for about 10 minutes, then GFI kicked off. Had to keep resetting every 2 minutes. It is definitely a defective GFI cord as circuits in house are new and the motor is not hit. Poor equipment. Would not recommend.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks Customer Service , Greenworks Technical Support , June 10, 2018
Hello PBJI
The Greenworks 2000 PSI requires an extremely high draw, as it increase or decreases the flow rate according to the nozzle being used at the time; it can surge. We do not recommend using an extension cord and for this tool to be the only device attached to the outlet. This Greenworks 2200 PSI is rated for use with a 20-30A supply (code for all modern buildings in North America). Some older dwellings with lower supplies may experience issues due to the power of this unit.
Please consider contacting us at 888-909-6757 we would really like to speak with you about this in greater detail to see if there is anything we can do to help.
I bought the 2200 in March 2018. the first time I used it, it worked well for 15 minutes and began to trip the electrical inline fuse. it repeatedly did this every 15 seconds afterward, making it impossible to use. i put it away and used it 2 weeks later and it did the same thing. impossible to use.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks Customer Service , Greenworks Technical Support , June 10, 2018
Hello tbyron79
The Greenworks 2000 PSI requires a high draw, as it increase or decreases the flow rate according to the nozzle being used at the time; it can surge. We do not recommend using an extension cord and for this tool to be the only device attached to the outlet. This Greenworks 2200 PSI is rated for use with a 20-30A supply (code for all modern buildings in North America). Some older dwellings with lower supplies may experience issues due to the power of this unit.
Please consider contacting us at 888-909-6757 we would really like to speak with you about this in greater detail to see if there is anything we can do to help.