Customer reviews from greenworkstools.com
Greenworks - Pro Brushless 2300 PSI (SGS Certified) 2.3 GPM Max / 1.2 GPM Electric Pressure Washer - Green
Average customer rating
4.5
(4,108 Reviews)
Rating breakdown 4,108 reviews
5 Stars
3,087
4 Stars
604
3 Stars
119
2 Stars
84
1 Star
214
91%of customers recommend this product.
(
3,344 out of
3,674)
Customer Reviews for Greenworks - Pro Brushless 2300 PSI (SGS Certified) 2.3 GPM Max / 1.2 GPM Electric Pressure Washer - Green
Customer Rating
4
Great pressure washer, all the right features
on October 15, 2021
Posted by: DIYcarwasher
from Cincinnati, OH
Gender:Male
Verified Purchase:Yes
I replaced my old pressure washer and am very placed with this one. It fixes the issues that I had. The hose is very easy to work with. The reservoir is easy to fill and use. The nozzle works well. It rolls very easily and isn't that heavy. Also, doesn't take up very much space. Great pressure washer for the price.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: C Jones
from Ankeny IA
Gender:Male
Verified Purchase:Yes
I've used the Pro 2300 twice sense my purchase. First time on a friends mobile home with vinyl siding. The Pro 2300 did a excellent job in removing green and black grime from the siding. My friend made the comment that the siding looked new again. The second usage was on my 11'x13' deck. I needed to prep the deck for painting. The Pro 2300 did a excellent job in removing contaminants from the wood surfaces. I'm impressed with the amount of pressure generated with this pressure washer. I got a piece of scrap wood to test the pressure and it will damage the wood if nozzle is held close to the surface. I did not use the turbo adapter for this test. Overall I'm extremely happy with this pressure washer and how easy it is to setup and use.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Stopped Working
on October 10, 2021
Posted by: Brad F
from Valrico, FL
Gender:Male
First time I used it worked great. Second time a week later and it stops working after 30 mins. It has power and water but the motor stopped working.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, October 12, 2021
Hello Brad F,
Thank you for taking the time to contact us. I'm sorry to hear that you're experiencing an issue with your pressure washer. I will provide some troubleshooting below to try out and if you find that these suggestions does not resolve, please contact us at 1-888-909-6757 or submit an email to info@greenworkstools.com and include the headline "Help Request - Reviewer Response".
Cleaning Obstructed Nozzles:
Over time with use, the pressure washer nozzles may collect dust, dirt and calcium build-up which as a result cause the pressure washer to malfunction while in use. To solve this problem, you can soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with hot water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
Removing Air From The Line / Bleeding Out The Unit:
For all of our pressure washers, when the customers unit will not turn on, it starts pulsating or turning off during use most of the time it is due to air that is stuck in the pump from the customer's previous use. This can be fixed by assembling the unit as per usual, no extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, reinstall your nozzle and continue squeezing the trigger then turn on the unit with your opposite hand. At this point, any trapped air should be eliminated – thus allowing the unit to run freely. *Please try all nozzles and note any differences in performance.
Hoping the issue will be able to correct with these suggestions. Please let us know.
Thank you for taking the time to contact us. I'm sorry to hear that you're experiencing an issue with your pressure washer. I will provide some troubleshooting below to try out and if you find that these suggestions does not resolve, please contact us at 1-888-909-6757 or submit an email to info@greenworkstools.com and include the headline "Help Request - Reviewer Response".
Cleaning Obstructed Nozzles:
Over time with use, the pressure washer nozzles may collect dust, dirt and calcium build-up which as a result cause the pressure washer to malfunction while in use. To solve this problem, you can soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with hot water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
Removing Air From The Line / Bleeding Out The Unit:
For all of our pressure washers, when the customers unit will not turn on, it starts pulsating or turning off during use most of the time it is due to air that is stuck in the pump from the customer's previous use. This can be fixed by assembling the unit as per usual, no extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, reinstall your nozzle and continue squeezing the trigger then turn on the unit with your opposite hand. At this point, any trapped air should be eliminated – thus allowing the unit to run freely. *Please try all nozzles and note any differences in performance.
Hoping the issue will be able to correct with these suggestions. Please let us know.
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Works Great!
on October 10, 2021
Posted by: Batcrap Crazy
from Ponchatoula, LA
Gender:Female
I bought this to replace a 2000 psi electric pressure washer that my daughter ruined by running without water hooked up to it. I am very please with this product and will not let my daughter borrow this one!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Robert C
from Detroit, MI
Gender:Male
Verified Purchase:Yes
Great pressure washer and value. Easy to use and excellent design. Light and portable.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Medium size pressure washer that packs a bunch.
on October 8, 2021
Posted by: GregK
from Renton, WA
Gender:Male
I recently purchased this 3000 psi pressure washer almost one month ago. I wanted a more compact yet powerful pressure washer that was electric. I have cleaned about 2,000 sf of hardscape to date and I am very impressed with the performance and ease of use. I would highly recommend this product. If I were to change one feature on this pressure washer it would be the length of the hose from 25ft to 50ft. Lastly, it is extremely easy to assemble and fairly lightweight if you need to haul it around.
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Very disappointed
on October 7, 2021
Posted by: Rmadd
from Rochester,ny
Gender:Male
I bought this last year and used it three times.Always applied water before powering up.I was pressure washing today and it just quit out of nowhere.No power at all.My brother bought one last year also and his just quit out of nowhere.For the price it worked well but I will not buy another one.I can hire someone every year for what I paid for this junk!
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, October 7, 2021
Hello Rmadd,
Sorry to hear about this experience! If air has gotten trapped in the pump, this may prevent the unit from powering on. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
If the issue does not resolve, please contact us at 1-888-909-6757 or submit an email to info@greenworkstools.com and include the headline "Help Request - Reviewer Response".
Sorry to hear about this experience! If air has gotten trapped in the pump, this may prevent the unit from powering on. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
If the issue does not resolve, please contact us at 1-888-909-6757 or submit an email to info@greenworkstools.com and include the headline "Help Request - Reviewer Response".
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Unbelievable pressure washer
on October 7, 2021
Posted by: Pressureman4life
from Miramar, Florida
Gender:Male
I bought this pressure washer after using noisy hard to start gasoline washers for over 40 years. This is a dream come true, every time I squeeze the trigger it works and it works well. It’s a tremendous value for the price and I highly recommend it to anyone who’s environmentally conscious. Great product!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com