Customer reviews from greenworkstools.com
Greenworks - Brushless 2300 PSI 2.3 GPM Max/ 1.2 GPM Electric Pressure Washer - Green
Average customer rating
4.6
(1,818 Reviews)
Rating breakdown 1,818 reviews
5 Stars
1,416
4 Stars
269
3 Stars
44
2 Stars
29
1 Star
60
93%of customers recommend this product.
(
1,533 out of
1,644)
Customer Reviews for Greenworks - Brushless 2300 PSI 2.3 GPM Max/ 1.2 GPM Electric Pressure Washer - Green
Customer Rating
4
Second purchase
on August 26, 2021
Posted by: dave of Maine
from Sanford, Maine
Gender:Male
This is the second of these items I bought. I now have one at our home in Maine and the other for the summer place on Cape Cod. It has been a very effective tool.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
2
Annoying, have to reset the breaker switch every time I stop the machine.
on August 28, 2021
Posted by: Anonymous
from California
Gender:Male
Verified Purchase:Yes
There is a short every time I release the trigger, then I have to reset the breaker switch at electric box if I need to continue the job, hope I can find out how to solve this issue.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks , Customer Care, August 30, 2021
Hello Carlos Esparza,
We are sorry to hear about this issue! Often, this would be caused by a faulty nozzle, or the unit not being bled of excess air in the line. Here is some troubleshooting below! Be sure to try all steps as described.
1) Clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3) Ensure that the water source is fully opened and is at least 60PSI.
4) Be sure to try ALL nozzles!
If this issue persists, please contact us directly at 1-888-909-6757 (1-888-90WORKS) or by sending an email to info@greenworkstools.com.
We are sorry to hear about this issue! Often, this would be caused by a faulty nozzle, or the unit not being bled of excess air in the line. Here is some troubleshooting below! Be sure to try all steps as described.
1) Clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3) Ensure that the water source is fully opened and is at least 60PSI.
4) Be sure to try ALL nozzles!
If this issue persists, please contact us directly at 1-888-909-6757 (1-888-90WORKS) or by sending an email to info@greenworkstools.com.
Written by a customer while visiting greenworkstools.com
Customer Rating
4
Great features
on September 3, 2021
Posted by: Noe1
from New Jersey
Gender:Male
I loved how it turns on only while the handle is pressed. It is very quiet. The blue hose did occasionally bend since the first use. The power is a little lacking compared to what I thought but that is expected from an electric washer. Design is great
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: John H in California
from Palo Alto, CA
Gender:Male
Verified Purchase:Yes
This is my first power washer, and it's great. It's very easy to set up and use. I used it on my garage floor which had various paint and stains over the decades. It got most of it out, although some deep-set stains are understandably hard to scrub out with water and probably need some chemicals or solvents. Maybe a higher PSI washer might work, but not worth it for me. I also used it to clean the concrete and stones around the house - wow looks brand new. One note - at first the washer would cycle from full-strength to partial strength during the washing. But once I switched to a different power outlet, it stayed full strength all the time.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Anonymous
from Los Angeles
Gender:Male
Verified Purchase:Yes
I bought this to wash our cars and it does that job fantastically. I use Adam’s products—soap straight from the bottle in the soap tank. Spray down the car with high pressure water first apply soap with low pressure soap nozzle, do a little rubbing down with a faux wool pad, high pressure spray to remove the soap. Follow with a blow dry using my Greenworks leaf blower on high. Then touchup details with some Graphene Detail Spray. All told it takes me about 15 minutes to do job. Looks professional and is easy on my bad back. Only took one star off because after first use the hose at the bottom of soap tank had come loose and left a mess on the floor. It hadn’t been properly attached at factory. Fixed easily with a hard push to fully seat it and hasn’t been a problem since.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Shazz
from Dallas TX area
Verified Purchase:Yes
Our 1940’s home of three years was listed as having “yards and yards of concrete”. We bought the Pro 2300-PSI Brushless 2.3-GPM Electric Pressure Washer because we knew we would need a very substantial pressure washer that could clean the extensive concrete areas of ages of dirt and do it relatively quickly. It does just that. and it is so easy to operate—from set up to cleaning to storing away. Perfect
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Awesome Power Washer
on September 13, 2021
Posted by: Washer94
from Minnesota
Gender:Male
I’ve had this power washer about a month. I love the water pressure I use it on my horse trailer, patio, vehicles and the house siding. It does everything I ask of it. The only issue I had was it says it’s a kink resistant hose but I took it out of the box and the hose had 6 kinks in it before I even used it. I still fight with those some but other than that it’s been great.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Steven J
from Lexington North Carolina
Gender:Male
Verified Purchase:Yes
Very nice easy to put together easy to start very quiet
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com