Customer reviews from greenworkstools.com
Greenworks - 3000 PSI Pressure Washer (2.0 GPM Max) with Foam Cannon - Powerful Enough to Remove Pesky Dirt - Green
Average customer rating
4.5
(4,121 Reviews)
Rating breakdown 4,121 reviews
5 Stars
3,097
4 Stars
607
3 Stars
118
2 Stars
83
1 Star
216
91%of customers recommend this product.
(
3,351 out of
3,685)
Customer Reviews for Greenworks - 3000 PSI Pressure Washer (2.0 GPM Max) with Foam Cannon - Powerful Enough to Remove Pesky Dirt - Green
Customer Rating
5
This machine is AWESOME!!
on August 11, 2022
Posted by: JeffMk
from El Cajon, CA
Gender:Male
I bought this unit to pressure wash my large cement driveway and large cement patio areas and brick wall that surrounds the patio areas that had not been pressure washed for 40+ years. It did an amazing job removing years old grime, embedded moss and algae and was super easy to use! One area was under 3 pine trees and was covered with black pine sap, dirt and crud. This area now looks brand new after using the pressure washer. I highly recommend this pressure washer! It does a great job!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
2300 PSI
on August 11, 2022
Posted by: Tony925
from Pittsburg, CA
Gender:Male
I love my pressure washer. From washing my cement to washing my car I couldn’t ask for anything else. The Uberflex hose is great too because it doesn’t kink. Greenworks making great choices unlike many other pressure washers
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Great pressure washer
on August 11, 2022
Posted by: Rick98
from Skowhegan
Gender:Male
I bought this a little over a month ago and the first project was pressure washing the back deck. What an awesome job it did. Very pleased with the results and outcome.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
3
bought the industrial version because the home use greenworks pro is junk
on August 10, 2022
Posted by: Kirkkustoms
Verified Purchase:Yes
I had to buy this industrial grade version because I went thru 4 of the non industrial pro versions over the course of 2 years. So far this one is holding up but we shall see in the next few months...
Response from greenworkstools.comBy Greenworks, Customer Care, August 10, 2022
Hello Kirkkustoms,
Thank you for your review, we appreciate your honest feedback. It is unfortunate to hear about this experience. Quality is at the heart of everything that we do, and the safety and satisfaction of our customers is number one. Please note all pressure washers purchased prior to 2020 have a 1-year warranty and units purchased 2020 and on will have a 3-year warranty from the date of purchase. We would be interested in hearing more about this situation. To discuss this issue further, please contact Customer Care at 1-888-909-6757 (1-888-90WORKS).
We would be happy to help!
Thank you for your review, we appreciate your honest feedback. It is unfortunate to hear about this experience. Quality is at the heart of everything that we do, and the safety and satisfaction of our customers is number one. Please note all pressure washers purchased prior to 2020 have a 1-year warranty and units purchased 2020 and on will have a 3-year warranty from the date of purchase. We would be interested in hearing more about this situation. To discuss this issue further, please contact Customer Care at 1-888-909-6757 (1-888-90WORKS).
We would be happy to help!
Written by a customer while visiting greenworkstools.com
Customer Rating
4
Great little powerwasher
on August 9, 2022
Posted by: Stece
from Outer Banks, NC
Gender:Male
Finally got out if box and assembled. Washed pparrot cage and lawnmower. The turbo head is INCREDIBLE.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Only worked 3 times.
on August 8, 2022
Posted by: F Stone
from NC.
Gender:Male
I used it three times the fourth time I went to use it it did not work. Very disappointed in their customer service.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, August 10, 2022
Hello F Stone,
We are sorry to hear that you are experiencing an issue with your pressure washer. Unfortunately, your review is not detailed enough for us to know what the issue is, but we will try to cover all bases.
Here you will find some troubleshooting suggestions for you to try.
Cleaning Obstructed Nozzles: To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction. Removing Air from The Line /
Bleeding Out the Unit: Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
Lastly, ensure that the water source is fully opened and is at least 60PSI. There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
Please note this product has a 3-year warranty from the date of purchase. If you have tried these steps and are still experiencing issues, please contact Greenworks at 1-888-909-6757 (1-888-90WORKS).
We are sorry to hear that you are experiencing an issue with your pressure washer. Unfortunately, your review is not detailed enough for us to know what the issue is, but we will try to cover all bases.
Here you will find some troubleshooting suggestions for you to try.
Cleaning Obstructed Nozzles: To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction. Removing Air from The Line /
Bleeding Out the Unit: Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
Lastly, ensure that the water source is fully opened and is at least 60PSI. There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
Please note this product has a 3-year warranty from the date of purchase. If you have tried these steps and are still experiencing issues, please contact Greenworks at 1-888-909-6757 (1-888-90WORKS).
Written by a customer while visiting greenworkstools.com
Posted by: Eric Pals
from Mason city, Iowa
Gender:Male
Verified Purchase:Yes
It works great for siding, driveways, cars, and much more! No problems with it at all
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
4
Good, easy to use machine
on August 6, 2022
Posted by: Pebbly
from Northwestern Ohio
Greenworks 3000 psi pressure washer
The machine doesn’t t have the pressure of a gas machine, that I am accustomed to using, but it does have enough pressure to meet my needs and there is much less hassles than dealing with a gas. This is the first machine I have purchased for personal use, as such there are a few improvement that I think would make the machine more user friendly. The first I think would be a huge improvement; put a drain plug in the soap dispenser tank so unused solution can be easily drained. Or better yet, make the tank easily removable so the solution could be poured out. Maybe tabs molded into the tank that fit into pockets or clips on the frame with 1 hand bolt, similar to the handle bolts, to secure it. With a quick connect like the hoses for the machine to draw the solution out during use. It is really a hassle removing unused solution now. Next, improve the wand mount. Maybe angle the bracket on the handle & put a push clip for the nozzle end on the frame. Next is a small, nice to have thing; a hook maybe on the handle for a garden hose. You need a hose to use the machine, it would be nice to be able to store a hose neatly with the machine so everything is there.
Overall I think this a very good, easy to use pressure washer & I’m looking forward to being able to use it for large & quick cleaning tasks.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com