Customer Reviews for Greenworks - 1800 PSI (1.1 GPM) Electric Pressure Washer PWMA Certified - Green
Customer Rating
5
It’s a nice travel unit. I use this on my travels to various places.
on June 23, 2024
Posted by: Hot Rod 93
from North Carolina
Gender:Male
[This review was collected as part of a promotion.] I bought this five years ago and have used it once a week during the spring and summer months absolutely love it
[This review was collected as part of a promotion.] Works really well but only comes with two nozzles, the strongest and the weakest. I had to buy nozzles for the in between stuff.
[This review was collected as part of a promotion.] This came together quickly and I was able to wash the bird poop off the house siding. Also got the deck furniture ready for the season!
bought 6/14/2024. Started using 6/19/2024 and seemed work well. 6/20/2024 sprayer periodically lost water pressure with pump sounding like it had no water but had been fine for a number of minutes. 6/21/2034 again pressure loss at times. Turbo didn't work as it did on 6/19/2034. Will see how it or if it continues
Response from greenworkstools.comBy Greenworks, June 24, 2024
Hello First user. Thank you for choosing Greenworks and for reaching out to us. We are sorry to hear that you are experiencing an issue with your pressure washer. Your review is not detailed enough for us to know what the issue is, but we will try to cover all bases. Here you will find some troubleshooting suggestions for you to try. Cleaning Obstructed Nozzles: To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to fail to function normally. Removing Air from The Line / Bleeding Out the Unit: Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit. Lastly, ensure that the water source is fully opened and is at least 45PSI. There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure. If you have tried these steps and are still experiencing issues, please start a Live chat on www.greenworkstools.com or contact Greenworks at 1-888-909-6757 (1-888-90WORKS). All we ask that you have access to the unit so that we can complete troubleshooting with you and gather necessary unit information, and we will be happy to assist with the warranty claims process. We appreciate you bringing this to our attention and look forward to speaking to you.
[This review was collected as part of a promotion.] Bought primarily to use with a foam cannon to wash cars and as such didn’t want a huge gas powered washer that would take up space. This fit the bill and works excellent. Quiet, compact, and powerful enough for general around the house needs.