Customer reviews from greenworkstools.com
Greenworks - 1800 PSI (1.1 GPM) Electric Pressure Washer PWMA Certified - Green
Average customer rating
4.4
(1,655 Reviews)
Rating breakdown 1,655 reviews
5 Stars
1,164
4 Stars
247
3 Stars
60
2 Stars
47
1 Star
137
86%of customers recommend this product.
(
1,304 out of
1,511)
Customer Reviews for Greenworks - 1800 PSI (1.1 GPM) Electric Pressure Washer PWMA Certified - Green
Posted by: Anonymous
Verified Purchase:Yes
It is a powerful tool and cleans as good or better than a gas unit. Easy to operate, no fuss with gas or fumes. I have two of these, and bought one for son. You cannot go wrong!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Great pressure washer
on July 24, 2022
Posted by: Big Jim leary
from Aston pa
Gender:Male
After using gas powered for years. I first bought this product a few years ago and I love so much I bought one for a house warming gift and another for my vacation home!!!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Junk
on July 24, 2022
Posted by: E Skinner
from Steamboat Springs, Colorado
Gender:Male
I bought the commercial version because they said it was for commercial it’s complete junk it’s barely at homeowner version not very much pressure at all the fact that they say it has 1500 PSI Is just not true I’m not sure where they’re measuring it from maybe within the pump itself.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, July 25, 2022
Hello E Skinner
Thank you for taking the time to voice your concerns. Greenworks 1500 PSI delivers 1500 PSI of water pressure. When you are using this pressure washer, water comes out of the machine at 1500 PSI, which leads to a water flow rate of 1.2 GPM – gallons per minute. This unit includes two different spray tips, which allow you to adjust the spray pattern of the water that comes out of the pressure washer. That way, if you want water to come out in a straight line, it can do that. Currently we do not manufacture a commercial 1500PSI. Please contact the Greenworks customer care team at 1-888-909-6757 (1-888-90WORKS) and we would be glad to further discuss.
Thank you for taking the time to voice your concerns. Greenworks 1500 PSI delivers 1500 PSI of water pressure. When you are using this pressure washer, water comes out of the machine at 1500 PSI, which leads to a water flow rate of 1.2 GPM – gallons per minute. This unit includes two different spray tips, which allow you to adjust the spray pattern of the water that comes out of the pressure washer. That way, if you want water to come out in a straight line, it can do that. Currently we do not manufacture a commercial 1500PSI. Please contact the Greenworks customer care team at 1-888-909-6757 (1-888-90WORKS) and we would be glad to further discuss.
Written by a customer while visiting greenworkstools.com
Customer Rating
5
2300 PSI Powerwasher
on July 17, 2022
Posted by: Rogojoh
from Des Plaines, IL
Gender:Male
I bought the powerwasher for my birthday, great quality Powerwasher for the price. First day I power washed my windows no issues. Next day power washed my car with the soap option worked great.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Bad turbo jet head
on July 16, 2022
Posted by: DNMIN
from Virginia
I bought this machine few months ago. When I need to use the turbo jet head to reach a little higher place, the Turbo head jet works far less than the 25 degree angle head.
My old one 1400 PSI works better (We can adjust the head from gentle to power jet).
My old one 1400 PSI works better (We can adjust the head from gentle to power jet).
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, July 20, 2022
Hello DNMIN,
Sorry to hear of the issue you are experiencing with the turbo nozzle. Sounds like the nozzle may be dirty/clogged.
A turbo nozzle - provides a 0-degree nozzle that oscillates through a 15-degree circular range. 1.09mm diameter of opening
To clean the nozzles, soak the nozzle in a half and half mixture of warm water and white vinegar. Soak the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction. Even a small number of debris can cause performance issues.
If issues persist, please contact us at 1-888-909-6757 (1-888-90WORKS).
Sorry to hear of the issue you are experiencing with the turbo nozzle. Sounds like the nozzle may be dirty/clogged.
A turbo nozzle - provides a 0-degree nozzle that oscillates through a 15-degree circular range. 1.09mm diameter of opening
To clean the nozzles, soak the nozzle in a half and half mixture of warm water and white vinegar. Soak the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction. Even a small number of debris can cause performance issues.
If issues persist, please contact us at 1-888-909-6757 (1-888-90WORKS).
Written by a customer while visiting greenworkstools.com
Posted by: SwampDonkey87
from Vermont
Gender:Male
Verified Purchase:Yes
Pressure washer is awesome. Super easy to use, lightweight and easy to haul around. I use it for cleaning muddy mountain bikes and especially the fishing boat. It blasts off week old fish guts and chum no problem! Great purchase. I read some of the less complimentary reviews and most of those folks clearly never read the directions for startup. Great product, I definitely recommend it!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
3
No more power than the lower pressure model
on July 14, 2022
Posted by: HJMcNair
from Angier, NC
Gender:Female
Bought this over 3 years ago because it stated it was more powerful than the 1500 or 1600 model. I have a two-story house and wanted to reach the apex in the roof (wasp nest) and gave the lower model to my sister with a one-story house. Not better, had to use a ladder and the water goes in so fast or not going out fast enough from the container, I had to tape it down with duct tape. The water shoots out the little hole on top.
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Greenworks Customer Support, July 15, 2022
Hello HJMcNair,
Thank you for your review. We are sorry to hear that this pressure washer is not fully meeting your expectations. If the unit is not reaching high pressure, there are some factors that could contribute to this. Please check the following if your unit is not reaching high pressure.
• That you are using a 1” (25 mm) or 5/8” (16 mm) garden hose.
• Ensure that there are no kinks, leaks, or blockages at the inlet filter, in the garden, or a high-pressure hose.
• That the water supply has been fully opened and is ideally 60 PSI (unit tolerates 45-75PSI).
• That a high-pressure nozzle is installed.
• Make sure that there is no air in the pump. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release the pressure then try turning the unit on.
• Clean your nozzles thoroughly with vinegar and water soak to remove calcium build-up.
If you are looking to reach the second story of your home, we would advise purchasing a designated second-story nozzle. While we do not currently offer one, you may purchase one from another brand that utilizes a 1/4" quick connect fitting.
We hope that these tips help!
Thank you for your review. We are sorry to hear that this pressure washer is not fully meeting your expectations. If the unit is not reaching high pressure, there are some factors that could contribute to this. Please check the following if your unit is not reaching high pressure.
• That you are using a 1” (25 mm) or 5/8” (16 mm) garden hose.
• Ensure that there are no kinks, leaks, or blockages at the inlet filter, in the garden, or a high-pressure hose.
• That the water supply has been fully opened and is ideally 60 PSI (unit tolerates 45-75PSI).
• That a high-pressure nozzle is installed.
• Make sure that there is no air in the pump. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release the pressure then try turning the unit on.
• Clean your nozzles thoroughly with vinegar and water soak to remove calcium build-up.
If you are looking to reach the second story of your home, we would advise purchasing a designated second-story nozzle. While we do not currently offer one, you may purchase one from another brand that utilizes a 1/4" quick connect fitting.
We hope that these tips help!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
My Greenworks pressure washer is an amazing tool
on July 13, 2022
Posted by: Metal Jake
from North Virginia
Gender:Male
I'm writing this review for my 12 year old son. He has started his own local car detailing business and uses his pressure washer to clean car exteriors. These are his words, although I may have cleaned up some of the grammar a bit :)
My green Works pressure washer is an amazing tool. It’s the only Pressure washers we’ve had, and the only ones we’ll ever need. We have two but we’re consider getting more, that’s how good and reliable the Greenworks tools are. setting up the machines were extremely easy. We have had no problems at all. It’s very portable unlike other pressure washers and quiet, not ear deafening! Just overall a very nice and neat tool.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com