Customer reviews from greenworkstools.com
Greenworks - 2100 PSI (SGS Certified) 1.2 GPM 13Amp Compact Electric Pressure Washer - Green
Average customer rating
4.6
(1,789 Reviews)
Rating breakdown 1,789 reviews
5 Stars
1,405
4 Stars
259
3 Stars
45
2 Stars
24
1 Star
56
94%of customers recommend this product.
(
1,521 out of
1,619)
Customer Reviews for Greenworks - 2100 PSI (SGS Certified) 1.2 GPM 13Amp Compact Electric Pressure Washer - Green
Customer Rating
5
Perfect for your shop!
on January 3, 2022
Posted by: Codlaud
from Salt Lake City, UT
Gender:Male
We love this pressure washer. We use it at our shop to wash vehicles and clean the floors. I love the pressure and water flow. The only negative would be the amount of time it takes for the pressure washer to start up every time you pull the trigger.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Underestimated
on December 23, 2021
Posted by: Rich82
from California
Gender:Male
I purchased this back in November and was iffy on going with an electric power washer. I’ve used gas for the majority but I’ve gotten tired of always having issues starting gas powered. So I read the reviews on this one and pulled the trigger on it since it was a 2300 gpm washer and I’m glad I did. First off, it’s lightweight and easy to use. It has three different tips and a power nozzle for the higher up hard to reach areas. I went to work on my driveway to remove a lot of dirt and tire marks and did so without any problem. I like that they put a decent size container to hold for your favorite cleaner for washing. And the upgraded hose doesn’t kink and is easy to maneuver. Overall, this was a really good choice for me. The majority of use for me, is the driveway cleaning and washing things down. I can honestly say that this pressure washer is recommended.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Ajay from FL
Verified Purchase:Yes
Easy to assemble. Quiet operation. Nice design that keeps nozzles, wand, hose very well organized. Great product.
Written by a customer while visiting greenworkstools.com
Posted by: Alex006
from Houston, TX
Gender:Male
Verified Purchase:Yes
High pressure outlet for an electric pressure washer. It’s great for the occasional use. It beats gas power if you don’t need one and having to deal with troubleshooting gas powered washer when you’re trying to use it.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
5
Great for small to medium size jobs.
on November 30, 2021
Posted by: agl5896
from Ardmore, TN
Gender:Male
I bought this electric pressure washer to do small jobs around the house and to wash my truck. When I received it there were numerous parts missing, but a call to the support center resolved that issue quickly - replacement item was received within 5 days. This washer has done a great job on the truck and beats dragging the big gas pressure washer out each time.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Jason California
from California
Gender:Male
Verified Purchase:Yes
Works great for what it is. Takes a few seconds for the pressure to build each time you grab the handle. Not really an issue but can be slightly annoying while waiting for the build up. Nice quality overall. Stable with the larger wheels which is what I was looking for.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Customer Rating
1
Used once and now broke
on November 27, 2021
Posted by: Guy24
from Houston TX
I used this pressure washer once. It sat in the garage for a few months and now water won't flow through it. Motor turns on and nothing come out the outlet even with the hose disconnected
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, November 29, 2021
Hello Guy24,
Sorry to hear of the issue you are experiencing with the pressure washer.
It sounds as though your nozzles may be clogged or there is some air trapped in the unit, these are common issues. With the following troubleshooting, this should be resolved! Please be sure to follow closely as these steps are not as effective when altered.
1) To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3) Ensure that the water source is fully opened and is at least 60PSI.
4) There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
If you are still having trouble, please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
Sorry to hear of the issue you are experiencing with the pressure washer.
It sounds as though your nozzles may be clogged or there is some air trapped in the unit, these are common issues. With the following troubleshooting, this should be resolved! Please be sure to follow closely as these steps are not as effective when altered.
1) To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3) Ensure that the water source is fully opened and is at least 60PSI.
4) There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
If you are still having trouble, please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
Written by a customer while visiting greenworkstools.com
Posted by: Anonymous
from Fort Myers, FL
Gender:Male
Verified Purchase:Yes
I have been very satisfied so far with my Greenworks Pro 2300-PSI Amp 2.3 GPM pressure washer. Very versatile and easy to use yet powerful when you need it. Wasy to manage fittings and hose. I'm sure I will get many productive hours of service from this gem.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com