Customer reviews from greenworkstools.com
Greenworks - 80V 3000 PSI Dual-Port Pressure Washer (2.0 GPM), Tool Only, Battery and Charger Not Included - Green
Average customer rating
4.6
(1,601 Reviews)
Rating breakdown 1,601 reviews
5 Stars
1,262
4 Stars
232
3 Stars
37
2 Stars
20
1 Star
50
94%of customers recommend this product.
(
1,362 out of
1,446)
Customer Reviews for Greenworks - 80V 3000 PSI Dual-Port Pressure Washer (2.0 GPM), Tool Only, Battery and Charger Not Included - Green
Customer Rating
1
Used once and now broke
on November 27, 2021
Posted by: Guy24
from Houston TX
I used this pressure washer once. It sat in the garage for a few months and now water won't flow through it. Motor turns on and nothing come out the outlet even with the hose disconnected
No, I would not recommend this to a friend.
Response from greenworkstools.comBy Greenworks, Customer Care, November 29, 2021
Hello Guy24,
Sorry to hear of the issue you are experiencing with the pressure washer.
It sounds as though your nozzles may be clogged or there is some air trapped in the unit, these are common issues. With the following troubleshooting, this should be resolved! Please be sure to follow closely as these steps are not as effective when altered.
1) To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3) Ensure that the water source is fully opened and is at least 60PSI.
4) There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
If you are still having trouble, please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
Sorry to hear of the issue you are experiencing with the pressure washer.
It sounds as though your nozzles may be clogged or there is some air trapped in the unit, these are common issues. With the following troubleshooting, this should be resolved! Please be sure to follow closely as these steps are not as effective when altered.
1) To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction.
2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit.
3) Ensure that the water source is fully opened and is at least 60PSI.
4) There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure.
If you are still having trouble, please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
Written by a customer while visiting greenworkstools.com
Posted by: Anonymous
from Fort Myers, FL
Gender:Male
Verified Purchase:Yes
I have been very satisfied so far with my Greenworks Pro 2300-PSI Amp 2.3 GPM pressure washer. Very versatile and easy to use yet powerful when you need it. Wasy to manage fittings and hose. I'm sure I will get many productive hours of service from this gem.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Anonymous
Verified Purchase:Yes
It cleans very well. I hope it runs better than the gas powered PW. They are way too maintenance intense.
Written by a customer while visiting greenworkstools.com
Posted by: Anonymous
Verified Purchase:Yes
I borrowed my son's Pro 2300-PSI pressure washer to remove 10 years of gunk from the exterior metal walls of my detached garage. It worked so well I bought my own Pro 2300. I've used it to clean vinyl siding, concrete slabs, cars, and I even used it to "pothole" a footing for a bird feeder pole (nothing but rocks and clay in the ground where we live - it worked great, I used the turbo nozzle to loosen things up and then used my shop vac to suck the rocks and mud out of the hole). I bought an extra 25 feet of hose to reduce the number of times I need to move the washer. The wand tends to fall out of the holder so I use a bungee cord to keep it in place. Five Stars.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Howie OHara
Verified Purchase:Yes
This replaced my gas one and hands down a better fit for me.
Much quieter and easier to use. Just hook it up and plug in and go!!
Much quieter and easier to use. Just hook it up and plug in and go!!
Written by a customer while visiting greenworkstools.com
Customer Rating
4
Hose not very good
on November 17, 2021
Posted by: Johnnyfairway
from Estero, Fl
Purchased this item to replace a gas washer. Very easy to assemble and use. However, DO NOT BELIEVE the hose is a NO KINK hose. I need to replace the hose to use.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Dockmaster
from Jacksonville, Florida
Gender:Male
Verified Purchase:Yes
I had a gas pressure washer for some years and it seemed like every time I wanted to use it, it wouldn't start, or the pump wasn't going to work, and I would end up sending it to the shop before I could get to my pressure washing. This Greenworks 2300 does a great job and it is easy to set up and get the work done. No pulling the starting cord, messing with the choke, and cussing because it would not get to work! This is a darn good pressure washer!! Buy it!!
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com
Posted by: Brezler
from Hagerstown, MD
Gender:Male
Verified Purchase:Yes
Super easy to assemble. Quieter than my last electric washer. Powerful and simple to operate.
I would recommend this to a friend!
Written by a customer while visiting greenworkstools.com