Customer reviews from Dymo.com
DYMO - LabelManager 210D Desktop Label Maker (1738345) - Black
Average customer rating
3.3
(12 Reviews)
Rating breakdown 12 reviews
5 Stars
6
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
4
80%of customers recommend this product.
(
8 out of
10)
Customer Reviews for DYMO - LabelManager 210D Desktop Label Maker (1738345) - Black
Customer Rating
1
Tape getting jammed
on March 13, 2024
Posted by: Dymo 1314
from Lincoln, NE
We bought out label maker and it doesn't dispense the tape out all the way, and gets jammed.
No, I would not recommend this to a friend.
Response from Dymo.comBy DYMO NA, March 15, 2024
Hello.
Thank you for contacting us and sharing your feedback with us.
We sincerely apologize for the inconvenience caused by our product. We expect the best from our products and it seems, on this occasion, we have let you down.
To resolve the issue you are experiencing please visit DYMO.com > Support> DYMO help center > LetraTag > How to solve the 'Tape Jam' error on my LetraTag label maker.
If you are still having issues (If you have more questions or feedback), please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
Thank you!
DYMO® Consumer Care
Thank you for contacting us and sharing your feedback with us.
We sincerely apologize for the inconvenience caused by our product. We expect the best from our products and it seems, on this occasion, we have let you down.
To resolve the issue you are experiencing please visit DYMO.com > Support> DYMO help center > LetraTag > How to solve the 'Tape Jam' error on my LetraTag label maker.
If you are still having issues (If you have more questions or feedback), please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
Thank you!
DYMO® Consumer Care
Written by a customer while visiting Dymo.com
Customer Rating
1
Backing issue
on December 25, 2023
Posted by: Tape
Cannot get backing off of tape - cannot apply on anything
Response from Dymo.comBy DYMO NA, December 26, 2023
Hello Alan,
Thank you for reaching out to us.
To remove the backing from a DYMO D1 tape, follow these steps:
1. Print your label using your DYMO label maker.
2. Once the label is printed, use a pair of scissors or a sharp knife to cut off the excess tape on each end of the label.
3. Then, turn the label over and locate the split in the middle of the backing.
4. Use your fingernail or a pair of tweezers to peel the backing away from the tape at one end of the label.
5. Slowly and carefully peel the backing away from the tape, working your way down the label towards the other end.
6. Once the backing is removed, you can apply the label to your desired surface.
Note: It's important to peel the backing away slowly and carefully to avoid tearing the tape or leaving any adhesive residue on the label. If you do encounter any adhesive residue, you can use a cloth dampened with rubbing alcohol or an adhesive remover to clean it off.
If you are still having issues, please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
Thank you!
DYMO® Consumer Care
Thank you!
DYMO® Consumer Care
Thank you for reaching out to us.
To remove the backing from a DYMO D1 tape, follow these steps:
1. Print your label using your DYMO label maker.
2. Once the label is printed, use a pair of scissors or a sharp knife to cut off the excess tape on each end of the label.
3. Then, turn the label over and locate the split in the middle of the backing.
4. Use your fingernail or a pair of tweezers to peel the backing away from the tape at one end of the label.
5. Slowly and carefully peel the backing away from the tape, working your way down the label towards the other end.
6. Once the backing is removed, you can apply the label to your desired surface.
Note: It's important to peel the backing away slowly and carefully to avoid tearing the tape or leaving any adhesive residue on the label. If you do encounter any adhesive residue, you can use a cloth dampened with rubbing alcohol or an adhesive remover to clean it off.
If you are still having issues, please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
Thank you!
DYMO® Consumer Care
Thank you!
DYMO® Consumer Care
Written by a customer while visiting Dymo.com
Customer Rating
1
Too hard to remove backing from tape
on December 25, 2023
Posted by: Tape issue
Cannot get backing off of tape - so cannot apply any labels
Response from Dymo.comBy DYMO NA, December 26, 2023
Hello Alan,
Thank you for reaching out to us.
To remove the backing from a DYMO D1 tape, follow these steps:
1. Print your label using your DYMO label maker.
2. Once the label is printed, use a pair of scissors or a sharp knife to cut off the excess tape on each end of the label.
3. Then, turn the label over and locate the split in the middle of the backing.
4. Use your fingernail or a pair of tweezers to peel the backing away from the tape at one end of the label.
5. Slowly and carefully peel the backing away from the tape, working your way down the label towards the other end.
6. Once the backing is removed, you can apply the label to your desired surface.
Note: It's important to peel the backing away slowly and carefully to avoid tearing the tape or leaving any adhesive residue on the label. If you do encounter any adhesive residue, you can use a cloth dampened with rubbing alcohol or an adhesive remover to clean it off.
If you are still having issues, please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
Thank you!
DYMO® Consumer Care
Thank you!
DYMO® Consumer Care
Thank you for reaching out to us.
To remove the backing from a DYMO D1 tape, follow these steps:
1. Print your label using your DYMO label maker.
2. Once the label is printed, use a pair of scissors or a sharp knife to cut off the excess tape on each end of the label.
3. Then, turn the label over and locate the split in the middle of the backing.
4. Use your fingernail or a pair of tweezers to peel the backing away from the tape at one end of the label.
5. Slowly and carefully peel the backing away from the tape, working your way down the label towards the other end.
6. Once the backing is removed, you can apply the label to your desired surface.
Note: It's important to peel the backing away slowly and carefully to avoid tearing the tape or leaving any adhesive residue on the label. If you do encounter any adhesive residue, you can use a cloth dampened with rubbing alcohol or an adhesive remover to clean it off.
If you are still having issues, please reach out to us via our website or through LiveChat. We’re available Mon.-Fri. 9am - 5pm Eastern Time.
Thank you!
DYMO® Consumer Care
Thank you!
DYMO® Consumer Care
Written by a customer while visiting Dymo.com
Customer Rating
5
Useful!
on July 24, 2020
Posted by: Sherrxoxo
from Columbia SC
Gender:Female
[This review was collected as part of a promotion.] What’s not to love about this label maker!? It’s so convenient and easy to use. I love that it can save names and change the font type and size.
I’ve never been very organized but this is helping me to do so! Once I completed organizing my jewelry making supplies and labeled those I wanted to label Everything! Haha I really did. So for me this is helpful in more ways than one and it deserves 5 stars from me!
I would recommend this to a friend!
Written by a customer while visiting Dymo.com
Customer Rating
5
Has many features
on July 26, 2020
Posted by: hdland
from illinois
Gender:Female
[This review was collected as part of a promotion.] This label maker is the best out there. It has many features on the menu screen and its easy to navigate. The letters can be small, medium, or large. There is a feature where you can put different designs around the wording to make it your own unique design. You can also print out many copies at once. This is a great feature for a business. The tape on the back of the label sticks really well to anything.
I would recommend this to a friend!
Written by a customer while visiting Dymo.com
Customer Rating
5
Great features
on August 6, 2020
Posted by: Doreen68
from Yutan Nebraska
Gender:Female
[This review was collected as part of a promotion.] This review is for the DYMO LabelManager Desktop Label Maker. I really like this label maker, it's very easy to use. Has so many different options where you can change the fonts, size, length, borders, style and others. You can preview and change or save before printing. Can choice to print up to 10 copies of the labels at a time. The labels stick very well once applied to surface you choose.
I would recommend this to a friend!
Written by a customer while visiting Dymo.com
Customer Rating
4
Nice Label Maker
on October 9, 2020
Posted by: MissPyggy
from South of Indy
Gender:Female
[This review was collected as part of a promotion.] I like this label maker. Can easily do upper and lowercase letters and it even includes boarders, some fun boarders, too. I haven't tried all the options, but does the job I need. Concerned about the somewhat faint screen. I have to hold it at a certain angle to be able to read the screen. I've tried to make it brighter, but no luck. Almost as if the batteries are low, but I installed brand new batteries, so can't be that. Also, after using a bit, it started spitting out the black strip (I assume the "ink") with the label. It was confusing at first, but easily removed. Just odd.
I would recommend this to a friend!
Written by a customer while visiting Dymo.com
Customer Rating
5
Easy to use
on July 30, 2020
Posted by: Qmarine
from Baltimore, md
Gender:Male
[This review was collected as part of a promotion.] This dymo label maker was super easy to set up and use. It can either be run with batteries or with an ac adaptor. The labels have a nice stick to them and we haven’t had any issue with them coming off.
I would recommend this to a friend!
Written by a customer while visiting Dymo.com